Ford 2006 Fusion v.1 Manuel d'utilisateur télécharger pdf (Page 164)

If you cannot move the gearshift lever out of P (Park) with ignition in

the RUN position and the brake pedal depressed:

1. Apply the parking brake, turn

ignition key to LOCK, then remove

the key.

2. Using a screwdriver (or similar

tool), remove the protective cover

to the interlock release access hole

on the console. Insert the

screwdriver (or similar tool) to

release the interlock.

3. Start the vehicle.

If it is necessary to use the above procedure to move the gearshift lever,

it is possible that a fuse has blown or the vehicle’s brakelamps are not

operating properly. Refer to Fuses and relays in the Roadside

Emergencies chapter.

Do not drive your vehicle until you verify that the brakelamps

are working.

Always set the parking brake fully and make sure the gearshift is

latched in P (Park). Turn the ignition to the LOCK position and

remove the key whenever you leave your vehicle.

If the parking brake is fully released, but the brake warning lamp

remains illuminated, the brakes may not be working properly.

See your authorized dealer as soon as possible.

2006 Fusion (fsn)

Owners Guide (post-2002-fmt)

USA (fus)

Driving

164

1 2 ... 159 160 161 162 163 164 165 166 167 168 169 ... 263 264

Pas de commentaire

Ford 2006 Fusion v.1 Manuel d'utilisateur Page 164