Ford 2006 Fusion v.1 Manuel d'utilisateur télécharger pdf (Page 43)

4. Remove screw from oval splash

shield access panel from the

exterior wheel well area. Lift up and

rearward to release a hidden finger

attachment at the lower portion of

the panel (Passenger side only with

ABS).

5. From the exterior wheel well area

reach arm through splash shield

opening to access bulb socket

(Passenger side only with ABS).

6. Remove the protective rubber cap

from the housing by grabbing it and

pulling rearward.

7. Remove the bulb socket by

rotating it counterclockwise, then

pulling it straight out of the lamp

assembly.

8. Let go of the bulb socket and

leave it dangling near the lamp

housing (Passenger side only with

ABS).

9. Reach over the front bolster in the engine area, with a tool if

necessary, bring the bulb socket upwards into an unobstructed area to

replace the bulb (Passenger side only with ABS).

10. Disconnect the electrical

connector from the bulb socket and

discard the old bulb socket.

11. Connect the new bulb socket to

the electrical connector.

2006 Fusion (fsn)

Owners Guide (post-2002-fmt)

USA (fus)

Lights

1 2 ... 38 39 40 41 42 43 44 45 46 47 48 ... 263 264

Pas de commentaire

Ford 2006 Fusion v.1 Manuel d'utilisateur Page 43