Ford 2005 Escape v.3 Manuel d'utilisateur

Introduction 4Instrument Cluster 10Warning and control lights 10Gauges 14Entertainment Systems 16AM/FM stereo with CD 16AM/FM stereo cassette with CD

WARNING LIGHTS AND CHIMESWarning lights and gauges can alert you to a vehicle condition that maybecome serious enough to cause expensive repairs. A wa

The head restraints can be movedup and down. Lift the head restraintso that it is located directly or asclose as possible behind your head.Push contro

3. Pull the seat release control.Note: Make sure the floor is clear of all objects before folding the seat.4. Flip seat forward.Attach the seatbelt we

5. To release seatback, pull theseatback release lever (on top ofseat) toward the front seat. This iscommon for both 60% and 40%seatbacks.Note: When t

2. Rotate seat cushion down into theseating position making sure thatthe seat cushion is locked into placeand that the seat belt buckles areexposed.Ma

To remove the rear cushion1. Lift the yellow tab to release thehinges.2. Pull the cushion to the outboardside of the vehicle.To install the rear cushi

• Restraints Control Module (RCM) with impact and safing sensors.• Restraint system warning light and back-up tone.• The electrical wiring for the air

position. The system is designed to help protect smaller drivers sittingclose to the driver air bag by providing a lower air bag output level.Front pa

allows your Personal Safety System to tailor the air bag deployment andsafety belt pretensioner activation depending upon safety belt usage.Refer to S

Safety restraints precautionsAlways drive and ride with your seatback upright and the lapbelt snug and low across the hips.To reduce the risk of injur

Safety belts and seats can become hot in a vehicle that has beenclosed up in sunny weather; they could burn a small child. Checkseat covers and buckle

Check fuel cap: Illuminates when the fuel cap may not be properlyinstalled. Continued driving with this light on may cause the Serviceengine soon warn

movement. For example, if the driver brakes suddenly or turns a cornersharply, or the vehicle receives an impact of approximately 5 mph (8km/h) or mor

How to disengage the automatic locking modeDisconnect the combination lap/shoulder belt and allow it to retractcompletely to disengage the automatic l

The safety belt pretensioners activate during frontal collisions, and inside collisions and rollovers when the vehicle is equipped with the SafetyCano

Conditions of operationIf... Then...The driver’s safety belt is notbuckled before the ignitionswitch is turned to the ONposition...The safety belt war

If... Then...The driver’s and front passenger’ssafety belts are buckled before theignition switch is turned to the ONposition or less than 1-2 minutes

Reasons given... Consider...⬙Belts areuncomfortable⬙Ford designs its safety belts to enhance comfort. Ifyou are uncomfortable - try different position

re-enable during the same ignition cycle if the occupant buckles andremains buckled for approximately 30 seconds. Confirmation is not givenfor the one

• This will enable the BeltMinder feature for that seating position if it iscurrently disabled. As confirmation, the restraint system warning lightwil

AIR BAG SUPPLEMENTAL RESTRAINT SYSTEM (SRS)Important SRS precautionsThe SRS is designed to work withthe safety belt to help protect thedriver and righ

Never place your arm over the air bag module as a deploying airbag can result in serious arm fractures or other injuries.To properly position yourself

Air bag readiness: If this light failsto illuminate when ignition is turnedto ON, continues to flash or remainson, have the system servicedimmediately

Children and air bagsChildren must always be properlyrestrained. Accident statisticssuggest that children are safer whenproperly restrained in the rea

The air bags inflate and deflaterapidly upon activation. After air bagdeployment, it is normal to notice asmoke-like, powdery residue orsmell the burn

Front passenger sensing systemThe front passenger sensing system will turn off the front passenger’sfrontal air bag under certain conditions. The fron

The indicator light is located in the center stack of the instrument paneljust below the radio.The front passenger sensing system is designed to turn

passenger airbag is disabled, the ⬙pass airbag off⬙ light may or may notbe illuminated according to the table below.ObjectsPass Airbag OffIndicator Li

• The readiness light will eitherflash or stay lit.• The readiness light will notilluminate immediately afterignition is turned on.• A series of five

To reduce risk of injury, do not obstruct or place objects in thedeployment path of the inflatable Safety Canopy娂.How does the Safety Canopy姟 system w

The Safety Canopy system is designed to active when the vehiclesustains lateral deceleration sufficient to cause the RCM to initiate SafetyCanopy infl

A difficulty with the system is indicated by one or more of the following:• The readiness light (same light as for front air bag system) will eitherfl

How does the side air bag system work?The design and development of theside air bag system includedrecommended testing proceduresthat were developed b

Four wheel drive indicator (if equipped): Illuminates when ignitionis first turned ON to check bulb. Solid illumination indicates 4WD systemis locked.

to inflate in side-impact collisions, not roll-over, rear-impact, frontal ornear-frontal collisions, unless the collision causes sufficient lateraldec

SAFETY RESTRAINTS FOR CHILDRENSee the following sections for directions on how to properly use safetyrestraints for children. Also see Air bag supplem

lap/shoulder belt will provide some protection, these children are still toosmall for lap/shoulder belts to fit properly, which could increase the ris

Types of booster seatsThere are two types of belt-positioning booster seats:• Those that are backless.If your backless booster seat has aremovable shi

Follow all instructions provided by the manufacturer of thebooster seat.Never put the shoulder belt under a child’s arm or behind theback because it e

• LATCH lower anchors are recommended for use by children up to 48pounds (22 kg) in a child restraint. Top tether anchors can be usedfor children up t

1. Position the child safety seat in aseat with a combination lap andshoulder belt.Children 12 and under should be properly restrained in the rearseat

4. Insert the belt tongue into theproper buckle (the buckle closest tothe direction the tongue is comingfrom) for that seating position untilyou hear

8. Allow the safety belt to retract toremove any slack in the belt.9. Before placing the child in theseat, forcibly tilt the seat forwardand back to m

3. Locate the correct anchor for theselected seating position.There are three tether anchorslocated on the headliner at the rearof the vehicle.4. Clip

High beams: Illuminates when thehigh beam headlamps are turned on.Key-in-ignition warning chime: Sounds when the key is left in theignition in the OFF

Attaching safety seats with LATCH (Lower Anchors and Tethers forChildren) attachments for child seat anchorsSome child safety seats have two rigid or

The lower anchors for child seatinstallation are located at the rearsection of the second row seatbetween the cushion and seat back.The LATCH anchors

NOTICE TO UTILITY VEHICLE AND TRUCK OWNERSUtility vehicles and trucks handledifferently than passenger cars inthe various driving conditions thatare e

Power is supplied to all four wheelsthrough a transfer case or powertransfer unit. 4WD vehicles allowyou to select different drive modesas necessary.

• Narrower — to provide greatermaneuverability in tight spaces,particularly in off-road use.As a result of the above dimensionaldifferences, SUV’s and

and one-half (1 1/2) times as well on the government course as a tiregraded 100. The relative performance of tires depends upon the actualconditions o

• Tire Identification Number (TIN): A number on the sidewall ofeach tire providing information about the tire brand andmanufacturing plant, tire size

Every day before you drive, checkyour tires. If one looks lower thanthe others, use a tire gauge to checkpressure of all tires and adjust ifrequired.A

Always inflate your tires to the Ford recommended inflation pressureeven if it is less than the maximum inflation pressure information foundon the tir

5. Repeat this procedure for each tire, including the spare.Note: Some spare tires require higher inflation pressure than the othertires. Check the ti

Never remove the coolant reservoir cap while the engine isrunning or hot.Odometer: Registers the total miles(kilometers) of the vehicle.Trip odometer:

The use of tire sealants may damage your tires.T-Type/Mini-Spare Tire Information (if equipped)Your vehicle may be equipped with a T-type/mini-spare t

use only. This means that if you need to use it, you should replace it assoon as possible with a road tire/wheel that is the same size and type asthe

To help prevent the vehicle from moving when you change a tire,be sure the parking brake is set, then block (in both directions)the wheel that is diag

Remove the lug wrench from thejack in order to remove the sparetire from under the vehicle.Removing the spare tire or spare tire and tether (if equipp

5. Use the lug wrench to remove thelug nut from the spare tire tether.6. If not replacing the spare or flattire to the underbody storage area,raise wi

Before placing the jack under the vehicle, NOTE the jack locations:• Front• Rear9. Lower the jack from its storedheight to fit under the jackingnotche

Never use the differentials as ajacking point.To lessen the risk ofpersonal injury, do not putany part of your body under thevehicle while changing a

Stowing the flat/spare tireNote: Failure to follow spare tire stowage instructions may result infailure of cable or loss of spare tire.If you are stow

WHEEL LUG NUT TORQUE SPECIFICATIONSRetighten the lug nuts to the specified torque at 500 miles (800 km)after any wheel disturbance (tire rotation, cha

Information on “P” type tiresP215/65R15 95H is an example of atire size, load index and speedrating. The definitions of theseitems are listed below. (

AM/FM STEREO / SINGLE CD RADIO (IF EQUIPPED)1. Balance: Press/ to shiftsound to the left/right speakers.2. Fade: Press/ to shiftsound to the front/rea

Note: You may not find this information on all tires because it is notrequired by federal law.Letter rating Speed rating - mph (km/h)M 81 mph (130 km/

12. Treadwear, Traction and Temperature Grades• Treadwear: The treadwear grade is a comparative rating based on thewear rate of the tire when tested u

Additional information contained on the tire sidewall for “LT” typetires“LT” type tires have some additionalinformation beyond those of “P”type tires;

Information on “T” type tires“T” type tires have some additionalinformation beyond those of “P”type tires; these differences aredescribed below:T145/8

the road in adverse (wet, snowy, etc.) conditions. Visually check yourtires for uneven wear, looking for high and low areas or unusuallysmooth areas.

• Avoid potholes and objects on the road• Do not run over curbs or hit the tire against a curb when parkingIf your vehicle is stuck in snow, mud, sand

your tires wear more evenly, providing better tire performance andlonger tire life. Unless otherwise specified, rotate the tires approximatelyevery 5,

• Rear Wheel Drive (RWD)vehicles/Four Wheel Drive(4WD)/ All Wheel Drive (AWD)vehicles (front tires at top ofdiagram)Sometimes irregular tire wear can

Follow these guidelines when using snow tires and traction devices:• SAE class “S” cables should ONLY be used on the front axle forP235/70R16 tires. W

Payload – is the combined weight of cargo and passengers that thevehicle is carrying. The maximum payload for your vehicle can be foundon the Tire Lab

To set the minute, press and hold CLK and press TUNE to decreaseor increase the minutes.5. EJ (eject): Press to eject a CD.6. COMP (Compression): In C

Cargo Weight – includes all weight added to the Base Curb Weight,including cargo and optional equipment. When towing, trailer tongue loador king pin w

GAWR (Gross Axle Weight Rating) – is the maximum allowableweight that can be carried by a single axle (front or rear). Thesenumbers are shown on the S

GVWR (Gross Vehicle WeightRating) – is the maximumallowable weight of the fully loadedvehicle (including all options,equipment, passengers and cargo).

mandatory options, no cargo (internal or external), a tongue load of10–15% (conventional trailer) or king pin weight of 15–25% (fifth wheeltrailer), a

6. If your vehicle will be towing a trailer, load from your trailer will betransferred to your vehicle. Consult this manual to determine how thisreduc

Special loading instructions for owners of pickup trucks andutility-type vehiclesFor important information regarding safe operation of this typeof veh

• Do not tow a trailer until your vehicle has been driven at least 800 km(500 miles).• Refer to the instructions included with towing accessories for

4x4GCWR (Gross Combined Weight Rating)/Trailer WeightsEngine MaximumGCWR - lb.(kg)Trailer WeightRange - lb.(kg)Maximumfrontal area oftrailer - ft2(m)2

HitchesDo not use hitches that clamp onto the vehicle bumper. Use a loadcarrying hitch. You must distribute the load in your trailer so that10–15% of

Understanding the positions of the 4–speed automatictransmission section in this chapter.• Anticipate stops and brake gradually.• Do not exceed the GC

14. CD: Press to enter CD mode orto play a CD already loaded into thesystem.15. AM/FM: Press to choose afrequency band in radio mode.16. Bass: Press/

• affecting driveability, emissions and reliability.Replace the rear axle lubricant any time the axle has been submerged inwater. Rear axle lubricant

STARTINGPositions of the ignition1. LOCK, locks the gearshift leverand allows key removal.2. ACCESSORY, allows the electricalaccessories such as the r

If you smell exhaust fumes inside your vehicle, have your dealerinspect your vehicle immediately. Do not drive if you smellexhaust fumes.Important saf

If starting a vehicle with a manualtransmission:• Make sure the parking brake isset.• Push the clutch pedal to thefloor.3. Turn the key to 3 (RUN) wit

Starting the engine1. Turn the key to 3 (RUN) withoutturning the key to 4 (START). Ifthere is difficulty in turning the key,rotate the steering wheel

Important ventilating informationIf the engine is idling while the vehicle is stopped for a long period oftime, open the windows at least one inch (2.

Brake AssistThe Brake Assist system provides full braking force during panic brakingsituations. It detects a rapid application of the brake pedal andm

To release, press and hold the button (2), pull the handle up slightly,then push the handle down.Always set the parking brake fully and make sure that

PREPARING TO DRIVE YOUR VEHICLEUtility vehicles have a significantly higher rollover rate thanother types of vehicles.In a rollover crash, an unbelted

2. Using a screwdriver or similartool, carefully pry out the small,round, tethered Brake TransmissionShift Interlock (BTSI) cover caplocated to the ri

PREMIUM AM/FM STEREO/CASSETTE/SINGLE CD (IF EQUIPPED)1. Power/volume: Press to turnON/OFF; turn to increase/decreasevolume.2. Scan: Press to hear a br

Driving with an automatic overdrive transaxleYour automatic overdrive transaxleprovides fully automatic operation ineither D (Overdrive) or with theO/

Understanding the gearshift positions of the 4–speed automatictransaxleThis vehicle is equipped with an adaptive Transmission Shift Strategy.Adaptive

• Move the gearshift lever into the desired gearTo put your vehicle in P (Park):• Come to a complete stop• Move the gearshift lever and securely latch

• O/D (Overdrive) is automatically returned each time the key is turnedoff.2 (Second)This position allows for second gear only.• Provides engine braki

MANUAL TRANSAXLE OPERATION (IF EQUIPPED)Using the clutchVehicles equipped with a manual transaxle have a starter interruptinterlock that prevents cran

Recommended shift speedsUpshift according to the following charts for best fuel economy:Upshifts when accelerating(recommended for best fuel economy)1

Parking your vehicle1. Apply the brake and shift into theneutral position.2. Set the parking brake.3. Depress the clutch, then shift into1 (First).124

4. Turn the ignition to position 1(LOCK) to shut the engine off andremove the ignition key.Do not park your vehicle in Neutral, it may move unexpected

• Blinks several times every minute when 4WD system requiresservice. Please bring your vehicle to your local dealer for service.4WD system messages in

If your vehicle goes off the edge of the pavement• If your vehicle goes off the edge of the pavement, slow down, butavoid severe brake application, ea

Seating and Safety Restraints 97Seating 97Safety restraints 104Air bags 118Child restraints 131Tires, Wheels and Loading 142Tire Information 145Tire I

into the CD player. The label may peel and cause the CD tobecome jammed. It is recommended that homemade CDs beidentified with permanent felt tip mark

If the parking brake is fully released, but the brake warning lampremains illuminated, the brakes may not be working properly.See your dealer or a qua

If you must reduce the tire pressure for whatever reason in sand, makesure you re-inflate the tires as soon as possible.Avoid excessive speed because

Management in encouraging you to help preserve our national forest andother public and private lands by “treading lightly.”Driving on hilly or sloping

If your vehicle has anti-lock brakes, apply the brakes steadily. Do not“pump” the brakes.Driving on snow and ice4WD vehicles have advantages over 2WD

Failure to maintain your vehicle properly may void the warranty, increaseyour repair cost, reduce vehicle performance and operational capabilitiesand

The RSS detects obstacles up to 61⁄2feet (2 meters) from the rearbumper with a decreased coveragearea at the outer corners of thebumper, (refer to the

DRIVING THROUGH WATERIf driving through deep or standing water is unavoidable, proceed veryslowly especially if the depth is not known. Never drive th

GETTING ROADSIDE ASSISTANCETo fully assist you should you have a vehicle concern, Ford MotorCompany offers a complimentary roadside assistance program

U.S. Ford or Mercury vehicle customers who require roadside assistance,call 1–800–241–3673; Lincoln vehicle customers call 1–800–521–4140.Canadian cus

This switch is located in the frontpassenger’s footwell, behind aflip-up cover, by the kick panelaccess cover.To reset the switch:1. Turn the ignition

the TUNE to decrease minutes or TUNE to increase minutes. Ifyour vehicle has a stand alone clock this control will not function.10. Balance: Press BAL

Standard fuse amperage rating and colorCOLORFuseratingMinifusesStandardfusesMaxifusesCartridgemaxifusesFuse linkcartridge2A Grey Grey ———3A Violet Vio

Passenger compartment fuse panelThe fuse panel is located on theright-hand side of the centerconsole, by the instrument panel.Remove the panel cover t

The fuses are coded as follows:Fuse/RelayLocationFuse AmpRatingPassenger Compartment Fuse PanelDescription1 15A* Trailer tow park lamps2 — Not used3 1

Fuse/RelayLocationFuse AmpRatingPassenger Compartment Fuse PanelDescription8 — Not used9 30A** Power door locks, Power seats10 15A* Heated mirrors11 1

Power distribution boxThe power distribution box islocated in the engine compartment.The power distribution box containshigh-current fuses that protec

Fuse/RelayLocationFuse AmpRatingPower Distribution Box Description4 5A* Keep Alive Power (KA PWR)5 15A* Heated Exhaust Gas Oxygen (HEGO)sensors6 20A*

Fuse/RelayLocationFuse AmpRatingPower Distribution Box DescriptionR7 — Starter relayR8 — High/Low speed fan relay 2R9 — Fog lamps relayR10 — A/C relay

Connecting the jumper cables1. Connect the positive (+) jumper cable to the positive (+) terminal ofthe discharged battery.Note: In the illustrations,

3. Connect the negative (-) cable to the negative (-) terminal of theassisting battery.4. Make the final connection of the negative (-) cable to an ex

3. Once the disabled vehicle has been started, run both engines for anadditional three minutes before disconnecting the jumper cables.Removing the jum

15. Side 1–2: Works in tape modeonly. Press to play reverse side ofthe tape.16. Fast Forward (FF): In CDmode, press for a slow advance,press and hold

3. Remove the jumper cable from the positive (+) terminal of the boostervehicle’s battery.4. Remove the jumper cable from the positive (+) terminal of

WRECKER TOWINGIf you need to have your vehicle towed, contact a professional towingservice or, if you are a member of a roadside assistance program, y

If the vehicle is towed by other means or incorrectly, vehicledamage may occur.In case of a roadside emergency with a disabled vehicle (without access

GETTING THE SERVICES YOU NEEDAt homeYou must take your Ford vehicle to an authorized Ford dealer forwarranty repairs. While any Ford dealership handli

In Canada:Customer Relationship CentreFord Motor Company of Canada, LimitedP.O. Box 2000Oakville, Ontario L6J 5E41-800-565-3673 (FORD)www.ford.caIf yo

Additional AssistanceIf you still have a complaint involving a warranty dispute, you may wishto contact the Dispute Settlement Board (U.S.).In some st

Ford Motor Company16800 Executive Plaza DriveMail Drop 3NE-BDearborn, MI 48126THE DISPUTE SETTLEMENT BOARD (U.S. ONLY)The Dispute Settlement Board is:

Eligibility may differ according to state law. For example, see the uniquebrochures for California, West Virginia, Georgia and Wisconsinpurchasers/les

• A description of the action you expect to resolve your concern.You will receive a letter of explanation if your application does notqualify for Boar

UTILIZING THE MEDIATION/ARBITRATION PROGRAM(CANADA ONLY)In those cases where you continue to feel that the efforts by Ford andthe dealer to resolve a

21. Seek: Press and releaseSEEK/ for previous/nextstrong station, selection or track.22. AM/FM: Press to selectAM/FM1/FM2 frequency band.MACH姞 300 SAT

If you did not take advantage of the Ford Extended Service Plan at thetime of purchasing your vehicle, you may still be eligible. Since thisinformatio

ORDERING ADDITIONAL OWNER’S LITERATURETo order the publications in this portfolio, contact Helm, Incorporated at:HELM, INCORPORATEDP.O. Box 07150Detro

WASHING THE EXTERIORWash your vehicle regularly with cool or lukewarm water and a neutralPh shampoo, such as Motorcraft Detail Wash (ZC-3–A), which is

• Remove particles such as bird droppings, tree sap, insect deposits, tarspots, road salt and industrial fallout before repairing paint chips.• Always

• 2.3L I4• 3.0L DOHC V6 — Duratec Engine• Never wash or rinse the engine while it is running; water in therunning engine may cause internal damage.PLA

WINDOWS AND WIPER BLADESThe windshield, rear and side windows and the wiper blades should becleaned regularly. If the wipers do not wipe properly, sub

• Remove dust and loose dirt with a vacuum cleaner.• Remove light stains and soil with Motorcraft Extra StrengthUpholstery Cleaner (ZC-41).• If grease

FORD, LINCOLN AND MERCURY CAR CARE PRODUCTSYour Ford, Lincoln or Mercury dealer has many quality products availableto clean your vehicle and protect i

SERVICE RECOMMENDATIONSTo help you service your vehicle:• We highlight do-it-yourself items in the engine compartment for easylocation.• We provide a

• Manual transmission:1. Set the parking brake, depress the clutch and place the gearshift in N(Neutral).2. Block the wheels.Note: Do not start your e

3. DSP (Digital SignalProcessing): Press DSP to accessthe Ambiance menu. Ambiance givesthe feeling of “being there” to yourmusic, creating increased c

IDENTIFYING COMPONENTS IN THE ENGINE COMPARTMENT2.3L I4 engine1. Power steering fluid reservoir2. Engine coolant reservoir3. Automatic transmission di

3.0L DOHC V6 Duratec engine1. Power steering fluid reservoir2. Engine coolant reservoir3. Automatic transmission fluid dipstick4. Brake fluid reservoi

WINDSHIELD WASHER FLUIDAdd fluid to fill the reservoir if thelevel is low. In very cold weather, donot fill the reservoir completely.Only use a washer

3. Set the parking brake and ensure the gearshift is securely latched in P(Park) (automatic transmissions) or 1 (First) (manual transmissions).4. Open

• 2.3L I4 engine• 3.0L DOHC V6 Duratec engine• If the oil level is below the add 1QT or MIN mark, add enough oil toraise the level within the 1QT-FULL

2. If the engine oil level is not within the normal range, add only certifiedengine oil of the recommended viscosity. Remove the engine oil filler cap

Ford production and aftermarket (Motorcraft) oil filters are designed foradded engine protection and long life. If a replacement oil filter is usedtha

Batteries normally produce explosive gases which can causepersonal injury. Therefore, do not allow flames, sparks or lightedsubstances to come near th

When the battery is disconnected or a new battery installed, thetransmission must relearn its adaptive strategy. As a result of this, thetransmission

• Enables calibrated gauges to work properly.When the engine is cold, check thelevel of the engine coolant in thereservoir.• The engine coolant should

Fade: Press FADE; then pressSEL/ to shift sound to thefront/rear speakers.9. Menu: Press MENU and SEL toaccess clock mode, RDS on/off,Traffic, Program

• Add Motorcraft Premium Gold Engine Coolant(yellow-colored), VC-7–A (U.S., except CA and OR), VC-7–B(CA and OR only), meeting Ford SpecificationWSS-M

2. When the engine is cool, wrap a thick cloth around the coolantpressure relief cap on the coolant reservoir (a translucent plastic bottle).Slowly tu

Fill your engine coolant reservoir as outlined in Adding engine coolantin this section.Severe climatesIf you drive in extremely cold climates (less th

How fail-safe cooling worksIf the engine begins to overheat:• The engine coolant temperaturegauge will move to the red (hot)area.• Theindicator light

WHAT YOU SHOULD KNOW ABOUT AUTOMOTIVE FUELSImportant safety precautionsDo not overfill the fuel tank. The pressure in an overfilled tankmay cause leak

• Fuels can also be harmful if absorbed through the skin. If fuel issplashed on the skin and/or clothing, promptly remove contaminatedclothing and was

3. Pull to remove the cap from the fuel filler pipe.4. To install the cap, align the tabs on the cap with the notches on thefiller pipe.5. Turn the fi

Octane recommendationsYour vehicle is designed to use“Regular” unleaded gasoline withpump (R+M)/2 octane rating of 87.We do not recommend the use ofga

• The indicator may come on. For more information on the “CheckEngine” indicator, refer to the Instrument Cluster chapter.Fuel FilterFor fuel filter r

• Allow no more than 2 automatic click-offs when filling.• Always use fuel with the recommended octane rating.• Use a known quality gasoline, preferab

12. AM/FM: Press to select AM/FMfrequency band.Autoset: Allows you to set thestrongest local radio stations without losing your original manually setp

• Anticipate stopping; slowing down may eliminate the need to stop.• Sudden or hard accelerations may reduce fuel economy.• Slow down gradually.• Driv

• Driving on flat terrain offers improved fuel economy as compared todriving on hilly terrain.• Transmissions give their best fuel economy when operat

Illumination of the indicator, charging system warning light or thetemperature warning light, fluid leaks, strange odors, smoke or loss ofengine power

Readiness for Inspection/Maintenance (I/M) testingIn some localities, it may be a legal requirement to pass an I/M test ofthe on-board diagnostics sys

4. Check the fluid level in thereservoir. It should be between theMIN and MAX lines. Do not addfluid if the level is in this range.5. If the fluid is

during hot weather or pulling a trailer, the vehicle should beturned off for about 30 minutes to allow fluid to cool beforechecking.1. Drive the vehic

High fluid levelFluid levels above the crosshatchzone may result in transaxle failure.An overfill condition of transmissionfluid may cause shift and/o

Checking and adding manual transmission fluid (if equipped)1. Park the vehicle on a levelsurface.2. Engage the parking brake fully –put in first gear.

When changing the air filter element, use only the Motorcraft air filterelement listed. Refer to Motorcraft part numbers in this chapter.Note: Do not

MOTORCRAFT PART NUMBERSComponent 2.3L I4 engine 3.0L DOHC V6 DuratecengineAir filter element1FA-1683 FA-1683Fuel filter FG-800-A FG-800-ABattery BXT-4

16. Scan: Press to move up theradio frequency band. SCANautomatically finds a station, plays itfor five seconds, then moves to the next station. Press

REFILL CAPACITIESFluid Ford PartNameApplication CapacityBrake fluid (andclutch fluid ifequipped)Motorcraft HighPerformanceDOT 3 MotorVehicle BrakeFlui

Fluid Ford PartNameApplication CapacityPower Take-offUnitMotorcraft SAE75W-140 HighPerformanceSynthetic RearAxle Lubricant4X4 (Automatic) 12 ounces(0.

2Service refill capacity is determined by filling the transmission to thebottom of the filler hole with the vehicle on a level surface.3Indicates only

Item Ford PartName orequivalentFord PartNumberFordSpecificationEngine coolant1MotorcraftPremium GoldEngine Coolant(yellow-colored)VC-7–A (U.S.,except

Item Ford PartName orequivalentFord PartNumberFordSpecificationWindshieldwasher fluidMotorcraftPremiumWindshieldWasherConcentrateZC-32–A WSB-M8B16–A21

VEHICLE DIMENSIONSDimensions 4–Door - inches (mm)(1) Vehicle height/ Maximumheight*69.7 (1770)/70.3 (1786)*(2) Front track / rear 61.3 (1557)/60.9 (15

IDENTIFYING YOUR VEHICLECertification labelThe National Highway Traffic SafetyAdministration Regulations requirethat a Certification label be affixedt

Vehicle identification number (VIN)The vehicle identification number isattached to a metal tag and islocated on the driver sideinstrument panel. (Plea

GENUINE FORD ACCESSORIES FOR YOUR VEHICLEA wide selection of Genuine Ford Accessories are available for yourvehicle through your local authorized Ford

Interior styleElectrochromatic compass/temperature interior mirrorsFloor matsLeather wrapped steering wheelsScuff platesLifestyleBike racksCargo organ

AM/FM STEREO IN-DASH SIX CD MODULAR AUDIO (IF EQUIPPED)1. CD: To begin CD play, insert aCD into the slot, label side up. Thesystem will auto-load the

• To avoid interference with other vehicle functions, such as anti-lockbraking systems, amateur radio users who install radios and antennasonto their

AAccessory delay ...62Air bag supplemental restraintsystem ...118, 125, 128and child safety seats ...

instrument panel ...235interior ...235interior trim ...235plastic parts ..

service points ...240–241starting after a collision ...208Engine block heater ...184Engine oil ...

Infant seats(see Safety seats) ...134Inspection/maintenance (I/M)testing ...263Instrument panel

Passenger OccupantClassification Sensor ...106Power distribution box(see Fuses) ...214Power mirrors ...

alignment ...165care ...163changing ...151checking

287

288

SCAN: Scan works in radio and CD mode. Press SCAN to hear a briefsampling of all listenable stations on the frequency band or the first tenseconds eac

Maintenance and Specifications 238Engine compartment 240Engine oil 242Battery 246Fuel information 254Air filter(s) 268Part numbers 269Refill capacitie

8. SHUF (Shuffle): Press to playall tracks on the current CD inrandom order.9. RPT (Repeat): Press to repeatthe current CD track. The track willrepeat

17. FM 1/2: Press to enter FMmode. Press to toggle between FM1and FM2.18. AM: Press to enter AM mode.SATELLITE COMPATIBLE AM/FM STEREO IN-DASH SINGLEC

TEXT is also available when equipped with Satellite radio. Your radiocomes equipped with Satellite ready capability. The kit to enable Satelliterecept

stored in preset 1 will begin playing. If there are less than six strongstations, the system will store the last one in the remaining presets.Speed se

instructions are included with the dealer installed kit. Dealer installedsatellite kit only available in the continental United States.17. BAND: Press

CAT: CAT is only available when equipped with Satellite Radio. Yourradio comes equipped with Satellite ready capability. The kit to enableSatellite re

shaped CDs, CDs with a scratch protection film attached, and CDswith homemade paper (adhesive) labels should not be insertedinto the CD player. The la

Compression: In CD mode, press to bring soft and loud passagestogether for a more consistent listening level. Press MENU untilCOMPRESS is displayed. U

Fade: Press FADE; then pressSEL/ to shift sound to therear/front speakers.10. SHUFFLE: In CD/MP3 mode,press to play tracks in randomorder. Press to sh

Treble: Press TREB; then pressSEL/ to decrease/increasethe treble output.15. Fast Forward (FF): In CDmode, press and hold to fastforward. In tape mode

CALIFORNIA Proposition 65 WarningWARNING: Engine exhaust, some of its constituents, andcertain vehicle components contain or emit chemicals known toth

23. Power/volume: Press to turnON/OFF; turn to increase/decreasevolume.ACCESSORY DELAYWith accessory delay, the window switches, moon roof (if equippe

Don’t:• Expose tapes to direct sunlight, extreme humidity, heat or cold.• Leave tapes in the cassette player for a long time when not beingplayed.CD/C

HEATER ONLY SYSTEM(IF EQUIPPED)1. Fan speed adjustment: Controlsthe volume of air circulated in thevehicle.2. Air flow selections: Controlsthe directi

Do not place objects on top of the instrument panel as theseobjects may become projectiles in a collision or sudden stop.MANUAL HEATING AND AIR CONDIT

• Do not put objects under the front seats that will interfere with theairflow to the back seats.• Remove any snow, ice or leaves from the air intake

HEADLAMP CONTROLRotate the headlamp control to thefirst positionto turn on theparking lamps. Rotate to the secondpositionto also turn on theheadlamps.

1. Turn the key to the 1 (LOCK)position.2. Rotate the headlamp control tothe autolamp position.3. Rotate the headlamp control tothe OFF position.4. Tu

Smart park lamps (if equipped)If your vehicle is equipped with the DRL and autolamp features, yourpark lamps will turn on automatically when lighting

• Push and hold bottom of controlto dim.AIMING THE HEADLAMPSThe headlamps on your vehicle are properly aimed at the assembly plant.If your vehicle has

4. On the wall or screen you willobserve a light pattern with adistinct horizontal edge of highintensity light towards the right. Ifthis edge is not a

Warning symbols on your vehicleWhen you see this symbol, it isimperative that you consult therelevant section of this guide beforetouching or attempti

INTERIOR LAMPSDome lamps and map lampsThe front dome lamp is located overhead between the driver andpassenger seats.The dome lamp control has threepos

Cargo and dome lampRear cargo lamp equipped with anON/OFF/DOOR control will lightwhen:• the doors are closed and thecontrol is in the ON position.• th

Function Number of bulbs Trade numberFoglamp (front) 2 H10Center High-mount stop lamp 5 W5WRear license plate lamp 2 W5WAll replacement bulbs are clea

Highbeam bulb replacement4. Locate the bulb that is the mostcenter in the vehicle and removethe electrical connector by pulling itstraight off.5. Loos

Replacing brake/tail/turn/backup lamp bulbsThe brake/tail/turn/backup lamp bulbs are located in the tail lampassembly, one just below the other. Follo

3. Pull the bulb out from the socket and push in the new bulb.4. Install the bulb socket in lamp assembly turning it clockwise.5. To install, press th

MULTI-FUNCTION LEVERWindshield wiper: For intermittentoperation, move control down oneposition.Adjust the rotary control to thedesired speed setting.F

Rear window wiper/washer controlsFor intermittent operation of rearwiper, rotate end of control upwardto theposition.For normal speed rear wiperoperat

5. To prolong the life of the wiper blades, it is highly recommended toscrape off the ice on the windshield before turning on the wipers. Thelayer of

Installing a garage door opener (if equipped)The storage compartment can be converted to accommodate a variety ofaftermarket garage door openers:• Rem

Please read the section Supplemental restraint system (SRS)in the Seating and Safety Restraints chapter. Failure to followthe specific warnings and in

• Reinstall the rubber actuator (1) in the storage compartment (7) bytwisting and pushing it back into the slot.• Install the transmitter (6) on to st

Cigar lighter (if equipped)Do not plug optional electrical accessories into the cigarette lightersocket.Do not hold the lighter in with your hand whil

Window lock (if equipped)The window lock feature disables allthe power windows except thedriver’s.To lock out all the window controlsexcept for the dr

Heated outside mirrors (if equipped)Both mirrors are heatedautomatically to remove ice, mistand fog when the rear windowdefrost is activated.Do not re

Setting speed controlThe controls for using your speedcontrol are located on the steeringwheel for your convenience.1. Press the ON control and releas

Increasing speed while using speed controlThere are two ways to set a higherspeed:• Press and hold the SET ACCcontrol until you get to thedesired spee

• Press the speed control OFFcontrol.Note: When you turn off the speedcontrol or the ignition, your speedcontrol set speed memory is erased.CENTER CON

MOON ROOF (IF EQUIPPED)To operate the moon roof:• The moon roof is equipped withan automatic, one-touch, expressopening feature. Press andrelease the

Selectable featuresSetThis button is used to select andreset various functions shown in theINFO Menu.Info menuThis control displays the followingcontr

1. Drive the vehicle at least 8 km (5 miles) with the speed controlsystem engaged to display a stabilized average.2. Record the highway fuel economy f

Notice to owners of pickup trucks and utility type vehiclesUtility vehicles have a significantly higher rollover rate thanother types of vehicles.Befo

Units (English/Metric)1. Select this function from theINFO menu for the current units tobe displayed.2. Press the SET control to changefrom English to

2. Pressing the SET control cyclesthe message center through each ofthe language choices.3. Press and hold the SET controlfor 2 seconds to set the lan

Park brake on Warning returns after 10minutesLiftgate ajar Warning returns after theignition key is turned fromOFF to ON.Liftgate glass ajarService em

REAR RIGHT DOOR AJAR. Displayed when the rear right door is notcompletely closed.LIFTGATE AJAR. Displayed when the liftgate is not completely closed.L

4WD DISABLED TEMPORARILY (if equipped). Displayed when the4X4 is temporarily disabled. If the warning stays on or continues to comeon, contact your de

• Exterior lamps• Emissions system• 4WD infoContact your Ford Dealer as soon as possible if these messages occur ona regular basis.LIFTGATETo open the

To install the shade:• Insert the ends of the cargoshade into the mounting featureslocated behind the rear seat onthe rear trim panels.To operate the

LUGGAGE RACKYour vehicle may be equipped with aroof rack. The maximum load forthe roof rack is 100 lbs (44 kg),evenly distributed on the crossbars.If

2. Slide the cross-bar to the end ofthe rail.3. Use a long, flat object to depressthe tongue in the endcaps on bothsides of the cross-bar.4. Slide the

2. Use a long, flat object to depressthe tongue in the endcaps on bothsides of the cross-bar.3. Slide the cross-bar assembliesover the end cap tongue

These are some of the symbols you may see on your vehicle.Vehicle Symbol GlossarySafety AlertSee Owner’s GuideFasten Safety Belt Air Bag-FrontAir Bag-

To extend the inner rack:1. Rotate the handle on the lift barof the inner rack in the direction ofthe arrows on the handle.2. Lift the bar straight up

5. Insert the feet into the receiverson the bumper. Push the rack intothe bumper until the feet click intoplace.6. Figure shows foot (A) clickedinto p

Do not use the inner rack as a ladder. This could result inpersonal injury and damage to your roof rack.To stow the inner rack:1. Rotate the handle on

5. Lift the feet over the side rails and lock them into place.6. Ensure both feet are locked and secured into place.To adjust the cross-bar assembly o

Always stow the inner rack on the roof when using an automatedcar wash.Do not attempt to open the liftgate or rear window when the rackis in the down

KEYSOne key operates all the locks and starts the vehicle. Always carry aspare key with you in case of an emergency.Your keys are programmed to your v

7. Turn the ignition from the 3 (RUN) position to the 1 (OFF/LOCK)position. The horn will chirp one time to confirm the programming modehas been exite

Childproof door locks• When these locks are set, therear doors cannot be opened fromthe inside.• The rear doors can be openedfrom the outside when the

The remote entry system allows youto lock or unlock all vehicle doorswithout a key. The remote lockingand unlocking features will operateindependent o

more information concerning the perimeter alarm, refer to Perimeteralarm system (if equipped) later in this chapter.2. Pressand release again within t

Vehicle Symbol GlossaryPower WindowsFront/RearPower Window LockoutChild Safety DoorLock/UnlockInterior LuggageCompartment ReleaseSymbolPanic Alarm Eng

2. Do not wipe off any grease on thebattery terminals on the backsurface of the circuit board.3. Remove the old battery. Note: Please refer to local r

To reprogram the remote entrytransmitters:1. Ensure the vehicle iselectronically unlocked.2. Put the key in the ignition.3. Turn the key from the 1(OF

The lamps automatically turn off after 25 seconds. The dome and cargolamp controls must not be set to the OFF position for the illuminatedexit system

Automatic armingThe vehicle is armed immediatelyafter switching the ignition to the 2(ACCESSORY) position.The theft indicator will flash everytwo seco

• If two previously programmed coded keys are not available, you musttake your vehicle to your dealer to have the spare key(s)programmed.Please read a

PERIMETER ALARM SYSTEM (IF EQUIPPED)The perimeter anti-theft system will warn you in the event of anunauthorized entry to your vehicle.If there is any

• Turning the key in the ignition to the 3 (RUN) or 4 (START) position.Note: The key must be a valid, programmed, coded key.Triggering the anti-theft

FRONT SEATSNotes:Reclining the seatback can cause an occupant to slide under theseat’s safety belt, resulting in severe personal injuries in theevent

Adjusting the front manual seatLift handle to move seat forward orbackward.Pull lever up to adjust seatback.Adjusting the front power seat (if equippe

Press to raise or lower the rearportion of the seat cushion.Press the control to move the seatforward, backward, up or down.Heated seats (if equipped)