Introduction 4Instrument Cluster 10Warning and control lights 10Gauges 13Entertainment Systems 17AM/FM stereo cassette with CD 17AM/FM stereo with in-
WARNING LIGHTS AND CHIMESWarning lights and gauges can alert you to a vehicle condition that maybecome serious enough to cause expensive repairs. A wa
The system will not automatically shutoff unless control is pushed todeactivate. If system is not manually terminated at last use, then systemwill rem
REAR SEATSHead restraintsTo properly adjust your head restraints, lift the head restraint so that itis located directly behind your head or as close t
2. Lift seat cushion up and rotateforward.3. The headrest must be removed inorder to fold the seatback down.Remove 2nd row seat headrest bypushing in
5. Lift the lower seat control andflip the seatback down.6. For bench seats only, lift up flapon seatback to release closeoutpanel.7. For bench seats
2. Lift the lower seat control.3. Pull up on the seatback whilelifting the handle to lift the seatbackinto the upright position.Note: The front seat m
To reduce the risk of personal injury, the second row seat shouldnot be left in the forward, E-Z entry position while the vehicle isin motion. Please
Removing the third row seatFrom the rear of the vehicle, with the liftgate window and cargo doorsopen:1. Pull the seat release lever locatedon the low
3. Verify that the safety belts can move freely on either side of the seat.4. Lift the lever and pull up the seatback to drive position.SAFETY RESTRAI
Always transport children 12 years old and under in the backseat and always properly use appropriate child restraints.Safety belts and seats can becom
(8 km/h) or more, the combination safety belts will lock to help reduceforward movement of the driver and passengers.Automatic locking modeWhen to use
Check fuel cap (if equipped):Illuminates when the fuel cap maynot be properly installed. Continueddriving with this light on may causethe Service engi
How to disengage the automatic locking modeDisconnect the combination lap/shoulder belt and allow it to retractcompletely to disengage the automatic l
Position the safety belt height adjusters so that the belt restsacross the middle of your shoulder. Failure to adjust the safetybelt properly could re
The lap belt will not adjust automatically. To fasten, grasp the tongue,and with a continuous motion, pull out enough webbing to buckle thetongue into
If... Then...The driver’s safety belt is notbuckled before the vehicle hasreached at least 3 mph (5 km/h)and 1-2 minutes have elapsedsince the ignitio
Reasons given... Consider...“Safety belts don’t work” Safety belts, when used properly,reduce risk of death to front seatoccupants by 45% in cars, and
The BeltMinder feature can be deactivated/activated by performing thefollowing procedure:Before following the procedure, make sure that:• the parking
Safety belt extension assemblyIf the safety belt is too short when fully extended, there is a 8 inch (20cm) safety belt extension assembly that can be
AIR BAG SUPPLEMENTAL RESTRAINT SYSTEM (SRS)Important SRS precautionsThe SRS is designed to work withthe safety belt to help protect thedriver and righ
Never place your arm over the air bag module as a deploying airbag can result in serious arm fractures or other injuries.To properly position yourself
Children and air bagsChildren must always be properlyrestrained. Accident statisticssuggest that children are safer whenproperly restrained in the rea
Air bag readiness: If this light failsto illuminate when ignition is turnedto ON, continues to flash or remainson, have the system servicedimmediately
The air bags inflate and deflaterapidly upon activation. After air bagdeployment, it is normal to notice asmoke-like, powdery residue orsmell the burn
Determining if the system is operationalThe SRS uses a readiness light in the instrument cluster or a tone toindicate the condition of the system. Ref
Never let a passenger hold a child on his or her lap while thevehicle is moving. The passenger cannot protect the child frominjury in a collision.Alwa
Booster seats should be used until you can answer YES to ALL of thesequestions:• Can the child sit all the way backagainst the vehicle seat back withk
The shoulder belt should cross the chest, resting snugly on the center ofthe shoulder. The lap belt should rest low and snug across the hips,never up
When installing a child safety seat:• Review and follow the informationpresented in the Air bagsupplemental restraint system(SRS) section in this chap
Installing child safety seats with combination lap and shoulderbeltsAir bags can kill or injure a child in a child seat. NEVER place arear-facing chil
3. While holding the shoulder andlap belt portions together, route thetongue through the child seataccording to the child seatmanufacturer’s instructi
7. Pull the lap belt portion acrossthe child seat toward the buckle andpull up on the shoulder belt whilepushing down with your knee on thechild seat.
• Second row 60/40 bench seat• Second row bucket seatsAttach the tether strap only to the appropriate tether anchor asshown. The tether strap may not
Securilock娂 Anti-theft system:Flashes when the Securilock娂Passive Anti-theft System has beenactivated.Door ajar: Illuminates when theignition is in th
• Second row 60/40 bench seatNote: In the right seating position, use either tether anchor.• Second row bucket seatsNote: For each seat, use either te
• Third row• The anchors are on the back of the seat frame.4. Clip the tether strap hook to theanchor.If the tether strap is clippedincorrectly, the c
NOTICE TO UTILITY VEHICLE AND TRUCK OWNERSUtility vehicles and trucks handledifferently than passenger cars inthe various driving conditions thatare e
Power is supplied to all four wheelsthrough a transfer case or powertransfer unit. 4WD vehicles allowyou to select different drive modesas necessary.
• Narrower — to provide greatermaneuverability in tight spaces,particularly in off-road use.As a result of the above dimensionaldifferences, SUV’s and
and one-half (1 1/2) times as well on the government course as a tiregraded 100. The relative performance of tires depends upon the actualconditions o
• Tire Identification Number (TIN): A number on the sidewall ofeach tire providing information about the tire brand andmanufacturing plant, tire size
Every day before you drive, checkyour tires. If one looks lower thanthe others, use a tire gauge to checkpressure of all tires and adjust ifrequired.A
Always inflate your tires to the Ford recommended inflation pressureeven if it is less than the maximum inflation pressure information foundon the tir
5. Repeat this procedure for each tire, including the spare.Note: Some spare tires require higher inflation pressure than the othertires. Check the ti
Speedometer: Indicates thecurrent vehicle speed.Engine coolant temperaturegauge: Indicates engine coolanttemperature. At normal operatingtemperature,
TIRE REPLACEMENT REQUIREMENTSYour vehicle is equipped with tires designed to provide a safe ride andhandling capability.Only use replacement tires and
Your vehicle may be equipped with a dissimilar spare tire/wheel. Adissimilar spare tire/wheel is defined as a spare tire and/or wheel that isdifferent
Tire change procedureTo help prevent the vehicle from moving when you change a tire,be sure the parking brake is set, then block (in both directions)t
5. Loosen each wheel lug nutone-half turn counterclockwise butdo not remove them until the wheelis raised off the ground.When one of the rearwheels is
• Front passenger side (4x4)• Front driver side (4x4)Make sure the jack fits into thenotched area on the differentialhousing.• Rear8. Turn the jack ha
To lessen the risk of personal injury, do not put any part of yourbody under the vehicle while changing a tire. Do not start theengine when your vehic
WHEEL LUG NUT TORQUE SPECIFICATIONSRetighten the lug nuts to the specified torque at 500 miles (800 km)after any wheel disturbance (rotation, flat tir
Information on “P” type tiresP215/65R15 95H is an example of atire size, load index and speedrating. The definitions of theseitems are listed below. (
Note: You may not find this information on all tires because it is notrequired by federal law.Letter rating Speed rating - mph (km/h)M 81 mph (130 km/
11. Maximum Load: Indicates the maximum load in kilograms andpounds that can be carried by the tire. Refer to the tire label or thesafety certificatio
Engine oil pressure gauge:Indicates engine oil pressure. Theneedle should stay in the normaloperating range (between “L” and“H”). If the needle falls
Additional information contained on the tire sidewall for “LT” typetires“LT” type tires have some additionalinformation beyond those of “P”type tires;
Information on “T” type tires“T” type tires have some additionalinformation beyond those of “P”type tires; these differences aredescribed below:T145/8
TIRE CAREImproper or inadequate vehicle maintenance can also cause tires to wearabnormally. Here are some of the important maintenance items:Tire wear
Safety practicesDriving habits have a great deal to do with your tire mileage and safety.• Observe posted speed limits• Avoid fast starts, stops and t
The tires should also be balanced periodically. An unbalanced tire andwheel assembly may result in irregular tire wear.Tire rotationRotating your tire
• Rear Wheel Drive (RWD)vehicles/Four Wheel Drive(4WD)/ All Wheel Drive (AWD)vehicles (front tires at top ofdiagram)Sometimes irregular tire wear can
SNOW TIRES AND CHAINSSnow tires must be the same size and grade as the tires youcurrently have on your vehicle.The tires on your vehicle have all weat
Vehicle Curb Weight – is the weight of your new vehicle when youpicked it up from your dealer plus any aftermarket equipment.Payload – is the combined
Cargo Weight – includes all weight added to the Base Curb Weight,including cargo and optional equipment. When towing, trailer tongue loador king pin w
GAWR (Gross Axle Weight Rating) – is the maximum allowableweight that can be carried by a single axle (front or rear). Thesenumbers are shown on the S
Yellow area (warning) — thetransmission fluid is higher thannormal operating temperature. Thiscan be caused by special operationconditions (i.e. towin
GVWR (Gross Vehicle WeightRating) – is the maximumallowable weight of the fully loadedvehicle (including all options,equipment, passengers and cargo).
mandatory options, no cargo (internal or external), a tongue load of10–15% (conventional trailer) or king pin weight of 15–25% (fifth wheeltrailer), a
6. If your vehicle will be towing a trailer, load from your trailer will betransferred to your vehicle. Consult this manual to determine how thisreduc
Loaded vehicles may handle differently than unloaded vehicles.Extra precautions, such as slower speeds and increased stoppingdistance, should be taken
Towing a Class IV trailer (extra heavy duty) 5,001–11,000 lb.(2,268–4,536 kg) trailer weight requires a weight-distributinghitch.Do not exceed the GVW
Do not attach safety chains to the bumper.Trailer brakesElectric brakes and manual, automatic or surge-type trailer brakes aresafe if installed proper
• Your vehicle may be equipped with a temporary or conventional sparetire. If the spare tire is different in size (diameter and/or width), treadtype (
Exceeding these limits may allow water to enter critical vehiclecomponents, adversely affecting driveability, emissions and reliability.Replace front
STARTINGPositions of the ignition1. ACCESSORY, allows the electricalaccessories such as the radio tooperate while the engine is notrunning.2. LOCK, lo
Do not park, idle, or drive your vehicle in dry grass or other dryground cover. The emission system heats up the enginecompartment and exhaust system,
PREMIUM AM/FM STEREO/CASSETTE/SINGLE CD (IF EQUIPPED)1. Power/volume: Press to turnON/OFF; turn to increase/decreasevolume.2. Scan: Press to hear a br
• Make sure the parking brake isset.• Make sure the gearshift is in P(Park).• Turn the key to 4(ON) withoutturning the key to 5 (START).Make sure the
• If the driver’s safety belt is fastened, the light may not illuminate.Starting the engine1. Turn the key to 4 (ON) withoutturning the key to 5 (STAR
If you smell exhaust fumes inside your vehicle, have your dealerinspect your vehicle immediately. Do not drive if you smellexhaust fumes.Important ven
Even when the ABS is disabled,normal braking is still effective. (Ifyour BRAKE warning lampilluminates with the parking brakereleased, have your brake
Pull the right side of the releaselever to release the parking brake;the release lever pulls at an angletoward the driver’s door. To preventthe pedal
If any steering components are serviced or replaced, install newfasteners (many are coated with thread adhesive or have prevailingtorque features whic
AUTOMATIC TRANSMISSION OPERATIONBrake-shift interlockThis vehicle is equipped with a brake-shift interlock feature that preventsthe gearshift lever fr
Understanding the gearshift positions of the 4–speed automatictransmission (if equipped-gasoline engines only)This vehicle is equipped with an adaptiv
N (Neutral)With the gearshift lever in N (Neutral), the vehicle can be started and isfree to roll. Hold the brake pedal down while in this position.(O
• Selecting 2 (Second) at higher speeds will cause the transmission todownshift to second gear at the appropriate vehicle speed.1 (First)• Provides ma
CD units are designed to play commercially pressed 4.75 in (12cm) audio compact discs only. Due to technical incompatibility,certain recordable and re
To put your vehicle in P (Park):• Come to a complete stop• Move the gearshift lever and securely latch it in P (Park)Always set the parking brake full
Tow/Haul delays upshifts to reduce frequency of transmission shifting.Tow/Haul also provides engine braking in all forward gears when thetransmission
If your vehicle gets stuck in mud or snowIf your vehicle gets stuck in mud or snow, it may be rocked out byshifting between forward and reverse gears,
The RSS detects obstacles up to sixfeet (two meters.) from the rearbumper with a decreased coveragearea at the outer corners of thebumper, (refer to t
FOUR-WHEEL DRIVE (4WD) OPERATION (IF EQUIPPED)For important information regarding safe operation of this typeof vehicle, see Preparing to drive your v
• auto-manual hub locks can bemanually overridden by rotatingthe hub lock control from AUTOto LOCK if desired.• automatic operation of thehub locks is
4H (4WD High) – For winter and off-road conditions. Sends power tofront and rear wheels.4L (4WD Low)– For low-speed off-road applications that require
3. Place the gearshift in N (Neutral).4. Move the 4WD control to the 4x4LOW position.5. Hold the shift conditions until theLOW RANGE indicator lightil
The differences that make your vehicle so versatile also make it handledifferently than an ordinary passenger car.Maintain steering wheel control at a
Vehicles with a higher center of gravity such as utility andfour-wheel drive vehicles handle differently than vehicles with alower center of gravity.
9. Clock: Press to toggle betweenstation mode and clock mode. Pressand hold to set the clock. PresstheSEEK to decrease hours orSEEKto increase hours.
Vehicles with a higher center of gravity such as utility andfour-wheel drive vehicles handle differently than vehicles with alower center of gravity.
Power is supplied to all four wheelsthrough a transfer case. On 4WDvehicles, the transfer case allowsyou to select 4WD when necessary.Information on t
Once through water, always try the brakes. Wet brakes do not stop thevehicle as effectively as dry brakes. Drying can be improved by movingyour vehicl
When climbing a steep slope or hill,start in a lower gear rather thandownshifting to a lower gear from ahigher gear once the ascent hasstarted. This r
Avoid sudden braking as well. Although a 4WD vehicle may acceleratebetter than a two-wheel drive vehicle in snow and ice, it won’t stop anyfaster, bec
DRIVING THROUGH WATERIf driving through deep or standing water is unavoidable, proceed veryslowly especially when the depth is not known. Never drive
GETTING ROADSIDE ASSISTANCETo fully assist you should you have a vehicle concern, Ford MotorCompany offers a complimentary roadside assistance program
Canadian customers who require roadside assistance, call1–800–665–2006.If you need to arrange roadside assistance for yourself, Ford MotorCompany will
This switch is located in the frontpassenger’s footwell, behind the kickpanel access cover.To reset the switch:1. Turn the ignition OFF.2. Check the f
Standard fuse amperage rating and colorCOLORFuseratingMinifusesStandardfusesMaxifusesCartridgemaxifusesFuse linkcartridge2A Grey Grey ———3A Violet Vio
Seating and Safety Restraints 96Seating 96Safety restraints 107Air bags 117Child restraints 121Tires, Wheels and Loading 132Tire Information 135Tire I
The Dolby威 noise reduction system is manufactured under license fromDolby Laboratories Licensing Corporation. Dolby威 and the double-Dsymbol are regist
To remove a fuse use the fuse pullertool provided on the fuse panelcover.Always disconnect the battery before servicing high currentfuses.Always repla
The fuses are coded as follows.Fuse/RelayLocationFuse AmpRatingPassenger Compartment FusePanel Description1 15A* Adjustable pedals2 20A* Power point -
Fuse/RelayLocationFuse AmpRatingPassenger Compartment FusePanel Description27 15A* Ignition switch Run feed28 10A* EATC module/Front blower relay coil
Fuse/RelayLocationFuse AmpRatingPassenger Compartment FusePanel Description108 40A** Auxiliary blower motor109 30A** Heated seats110 50A** Ignition sw
JUMP STARTING YOUR VEHICLEThe gases around the battery can explode if exposed to flames,sparks, or lit cigarettes. An explosion could result in injury
Connecting the jumper cables1. Connect the positive (+) jumper cable to the positive (+) terminal ofthe discharged battery.Note: In the illustrations,
3. Connect the negative (-) cable to the negative (-) terminal of theassisting battery.4. Make the final connection of the negative (-) cable to an ex
3. Once the disabled vehicle has been started, run both engines for anadditional three minutes before disconnecting the jumper cables.Removing the jum
3. Remove the jumper cable from the positive (+) terminal of the boostervehicle’s battery.4. Remove the jumper cable from the positive (+) terminal of
WRECKER TOWINGIf you need to have your vehicle towed, contact a professional towingservice or, if you are a member of a roadside assistance program, y
21. Seek: Press and releaseSEEK/ for previous/nextstrong station, selection or track.22. AM/FM: Press to selectAM/FM1/FM2 frequency band.PREMIUM IN-DA
GETTING THE SERVICES YOU NEEDAt homeYou must take your Ford vehicle to an authorized Ford dealer forwarranty repairs. While any Ford dealership handli
Ford Motor Company of Canada, LimitedP.O. Box 2000Oakville, Ontario L6J 5E41-800-565-3673 (FORD)www.ford.caIf you own a Lincoln vehicle and are away f
In the United States, a warranty dispute must be submitted to theDispute Settlement Board before taking action under the Magnuson-MossWarranty Act, or
• available free to owners and lessees of qualifying Ford Motor Companyvehicles.The Dispute Settlement Board may not be available in all states. FordM
• A Ford or Lincoln Mercury dealership representativeConsumer candidates for Board membership are recruited and trained byan independent consulting fi
before the Board, this is not a requirement and the Board will decide thecase whether or not an oral presentation is made. An oral presentationmay be
The CAMVAP program is a straight-forward and relatively speedyalternative to resolve a disagreement when all other efforts to produce asettlement have
GETTING ASSISTANCE OUTSIDE THE U.S. AND CANADABefore exporting your vehicle to a foreign country, contact theappropriate foreign embassy or consulate.
Or call:For a free publication catalog, order toll free: 1-800-782-4356Monday-Friday 8:00 a.m. - 6:00 p.m. ESTHelm, Incorporated can also be reached b
WASHING THE EXTERIORWash your vehicle regularly with cool or lukewarm water and a neutralPh shampoo, such as Motorcraft Detail Wash (ZC-3–A), which is
3. Comp (Compression): In CD mode, press to adjust the soft and loudpassages together for a more consistent listening level. Press the COMPcontrol unt
PAINT CHIPSYour dealer has touch-up paint and sprays to match your vehicle’s color.Take your color code (printed on a sticker in the driver’s door jam
• Cover the highlighted areas to prevent water damage when cleaningthe engine.• 5.4L V8/6.8L V10 gasoline enginesPLASTIC (NON-PAINTED) EXTERIOR PARTSU
INSTRUMENT PANEL AND CLUSTER LENSClean the instrument panel with a damp cloth, then dry with a dry cloth.• Avoid cleaners or polish that increase the
LEATHER SEATS (IF EQUIPPED)Your leather seating surfaces have a clear, protective coating over theleather.• To clean, use a soft cloth with Motorcraft
Motorcraft Vinyl Cleaner (Canada only) (CXC-93)Motorcraft Vinyl Conditioner (Canada only) (CXC-94)Motorcraft Deluxe Leather and Vinyl Cleaner (not ava
SERVICE RECOMMENDATIONSTo help you service your vehicle:• We highlight do-it-yourself items in the engine compartment for easylocation.• We provide a
OPENING THE HOOD1. Inside the vehicle, pull the hoodrelease handle located under thebottom left corner of the instrumentpanel.2. Go to the front of th
1. Battery2. Engine oil filler cap3. Transmission fluid dipstick4. Engine oil dipstick5. Brake fluid reservoir6. Underhood relay box7. Power steering
Washer fluids containing non-methanol antifreeze agents should be usedonly if they provide cold weather protection without damaging thevehicle’s paint
5. Locate and carefully remove theengine oil level indicator (dipstick).6. Wipe the indicator clean. Insert the indicator fully, then remove itagain.•
FIND Program type: Allows you to search RDS-equipped stations for acertain category of music format: Classic, Country, Info, Jazz, Oldies,R&B, Rel
3. Recheck the engine oil level. Make sure the oil level is not above theMAX mark on the engine oil level indicator (dipstick).4. Install the indicato
It is recommended you use the appropriate Motorcraft oil filter (oranother brand meeting Ford specifications) for your engine application.BATTERYYour
Batteries normally produce explosive gases which can causepersonal injury. Therefore, do not allow flames, sparks or lightedsubstances to come near th
7. Drive the vehicle to complete the relearning process.• The vehicle may need to be driven 10 miles (16 km) or more torelearn the idle and fuel trim
• Enables calibrated gauges to work properly.When the engine is cold, check thelevel of the engine coolant in thereservoir.• The engine coolant should
Do not put engine coolant in the windshield washer fluidcontainer. If sprayed on the windshield, engine coolant couldmake it difficult to see through
To reduce the risk of personal injury, make sure the engine iscool before unscrewing the coolant pressure relief cap. Thecooling system is under press
Coolant refill capacityTo find out how much fluid your vehicle’s cooling system can hold, referto Refill capacities in this section.Fill your engine c
How fail-safe cooling worksIf the engine begins to overheat:• The engine coolant temperaturegauge will move to the red (hot)area.• Theand symbol willi
5. Re-start the engine and take your vehicle to a service facility.Driving the vehicle without repairing the engine problemincreases the chance of eng
14. Load: Press to load a CD.SELECT SLOT will appear in thedisplay. Select from 1–6onthememory presets. MOVING TO # and then LOAD CD# will appear in t
• Avoid inhaling fuel vapors. Inhaling too much fuel vapor of any kindcan lead to eye and respiratory tract irritation. In severe cases,excessive or p
Fuel Filler CapYour fuel tank filler cap has an indexed design with a 1/8 turn on/offfeature.When fueling your vehicle:1. Turn the engine off.2. Caref
contains more metallic additives than regular fuel. We recommend usingregular grade fuel. In Canada, many fuels contain metallic additives, butfuels f
Cleaner airFord endorses the use of reformulated “cleaner-burning” gasolines toimprove air quality.Running out of fuelAvoid running out of fuel becaus
The advertised capacity is the amount of the indicated capacity and theempty reserve combined. Indicated capacity is the difference in theamount of fu
Keep a record for at least one month and record the type of driving (cityor highway). This will provide an accurate estimate of the vehicle’s fuelecon
• Perform all regularly scheduled maintenance items. Follow therecommended maintenance schedule and owner maintenance checksfound in your vehicle sche
EMISSION CONTROL SYSTEMYour vehicle is equipped with various emission control components and acatalytic converter which will enable your vehicle to co
On board diagnostics (OBD-II)Your vehicle is equipped with a computer that monitors the engine’semission control system. This system is commonly known
Allow the vehicle to sit for at least eight hours without starting theengine. Then, start the engine and complete the above driving cycle. Theengine m
5. Volume: Press + to increase and — to decrease volume levels. Fromthe rear seat controls, volume cannot be set higher than the front seatsetting.6.
BRAKE FLUID RESERVOIRThe fluid level will drop slowly asthe brakes wear, and will rise whenthe brake components are replaced.Fluid levels below the “M
Low fluid levelDo not drive the vehicle if the fluidlevel is at the bottom of the dipstickand the ambient temperature isabove 10°C (50°F).Correct flui
If necessary, add fluid in 250 ml (1/2 pint) increments through the fillertube until the level is correct.If an overfill occurs, excess fluidshould be
4. Reinstall housing and check transmission fluid level using procedure inthis section.Checking and adding transfer case fluid (if equipped)1. Clean t
Changing the air filter element1. Loosen the clamp that securesthe air filter element in place.2. Carefully separate the two halvesof the air filter h
MOTORCRAFT PART NUMBERSComponent 5.4L V8 engine 6.8L V10 engineAir filter element1FA-1634 FA-1634Fuel filter FG-986B FG-986BOil filter FL-820-S FL-820
REFILL CAPACITIESFluidFord PartNameApplication CapacityFront axle Motorcraft SAE80W-90Premium RearAxle Lubricant4X4 vehicles 1.8L (3.6 pints)Rear axle
FluidFord PartNameApplication CapacityFuel tank N/A All 166.6L (44.0gallons)Power steeringfluidMotorcraftMERCON威 ATFAll Fill to FULLCOLD range ondipst
3Add the coolant type originally equipped in your vehicle.4If equipped with auxiliary rear heater, add an additional 1.4 L (1.5quarts).5Ensure the cor
LUBRICANT SPECIFICATIONSItemFord partname orequivalentFord partnumberFordspecificationSpindle bearingHighTemperature4X4 Front Axleand WheelBearing Gre
CD/CD PLAYER CAREDo:• Handle discs by their edges only. Never touch the playing surface.• Inspect discs before playing. Clean only with an approved CD
ItemFord partname orequivalentFord partnumberFordspecificationEngineoil-GasolineenginesMotorcraft SAE5W-20 PremiumSynthetic BlendMotor Oil (US)Motorcr
ItemFord partname orequivalentFord partnumberFordspecificationAutomatictransmissionTorqShift(5–speed)MotorcraftMERCON威 SPATF2XT-6–QSP WSS-M2C919–DMERC
ENGINE DATAEngine 5.4L V8 engine 6.8L V10 engineCubic inches 330 415Required fuel 87 octane 87 octaneFiring order 1-3-7-2-6-5-4-8 1-6-5-10-2-7-3-8-4-9
IDENTIFYING YOUR VEHICLECertification labelThe National Highway Traffic SafetyAdministration Regulations requirethat a Certification label be affixedt
Vehicle identification number (VIN)The vehicle identification number isattached to a metal tag and islocated on the driver sideinstrument panel. (Plea
GENUINE FORD ACCESSORIES FOR YOUR VEHICLEA wide selection of Genuine Ford Accessories are available for your vehiclethrough your local authorized Ford
Interior styleElectrochromatic compass/temperature interior mirrorsFloor matsLeather wrapped steering wheelsScuff platesLifestyleBike racksCargo organ
• The Federal Communications Commission (FCC) and Canadian RadioTelecommunications Commission (CRTC) regulate the use of mobilecommunications systems
AAccessory delay ...66Air bag supplemental restraintsystem ...117and child safety seats ..
wiper blades ...221Climate control (see Airconditioning or Heating) ...45, 47Clock adjust6-CD in dash ...
DVD player controls1. MAIN control• NEXT — Press to access the next track on the CD, the next chapteron the DVD, or to go up in cursor mode.• PREV — P
Exhaust fumes ...171FFail safe cooling ...237Fluid capacities ...256Foglamps ...
Instrument panelcleaning ...222cluster ...10lighting up panel andinterior ...
Power door locks ...84Power mirrors ...67Power point ...64Power steering
safety practices ...153sidewall information ...146snow tires and chains ...156spare tire ...
274
276
277
278
279
7. Auxiliary jacksInsert lines for standard video game players.8. STOP/EJECT controlPress once to stop DVD play. Press again to eject the DVD.9. DISPL
280
Next/Previous controlThe NEXT (up) and PREV (down)controls allow you to access thenext or previous track on a CD orchapter on a DVD. When pressed,the
Maintenance and Specifications 225Engine compartment 226Engine oil 228Battery 231Fuel information 239Air filter(s) 254Part numbers 255Refill capacitie
User menu modeTo adjust the display setting, pressDISP once and the player menu willappear. Press DISP again to adjustthe display setting. Use the arr
4. SEEK controlPress to reverse or advance the chapter of the DVD or the track of theCD.5. DISPLAY (DISP) controlPress to enable on screen display of
Rear seat controlsThe rear seat controls allow the rearseat passengers to operate theradio, tape, CD, DVD or AUX (ifequipped).Adjusting the volume fro
• DVD/AUXDVD player / Auxiliary line input (if equipped)Memory preset controlIn radio mode, press the MEMORYcontrol successively to scrollthrough the
Using wired headphones/Personal Audio FeatureSingle play mode will allow allpassengers to listen to the samemedia source through all speakers.The Pers
Press the memory preset controls 2and 4 simultaneously to togglebetween single play and thePersonal Audio Feature.Wireless headphones (for DVD system
When not using the headphones,shut them off to preserve batterypower. The headphones willautomatically turn off after fiveminutes if they have not rec
Playback and format• The DVD player of your Rear Seat Entertainment DVD System canonly be used in the “playback” mode. (The DVD player does not offera
This unit is designed to play commercially pressed 12 cm (4.75in) audio compact discs and DVDs only. Due to technicalincompatibility, certain recordab
On-screen indicatorsEach time a control is pressed, the operational status of the DVD playeris shown on the screen. The following are some possible in
CALIFORNIA Proposition 65 WarningWARNING: Engine exhaust, some of its constituents, andcertain vehicle components contain or emit chemicals known toth
Do not expose the liquid crystal display (LCD) flip-down screento direct sunlight or intensive ultraviolet rays for extensiveperiods of time. Ultravio
• high humidity.• a dusty environment.• locations where strong magnetic fields are generated.Temperature extremesWhen the vehicle is parked under dire
HEATER ONLY SYSTEM (IF EQUIPPED)1. Fan speed adjustment: Controls the volume of air circulated in thevehicle.2. Temperature selection: Controls the te
3. Set the fan speed to the highest setting.4. Direct the outer instrument panel vents toward the side windows.To increase airflow to the outer instru
: Distributes outside air through the windshield defroster vents anddemister vents.Operating tips• To reduce fog build up on the windshield during hum
AUTOMATIC TEMPERATURE CONTROL SYSTEM (IF EQUIPPED)Press the AUTO and(floor/defrost) controls at the same time andhold for one second to switch between
6. (Floor): Distributes air through the floor vents.7.(Panel/floor): Distributes air through the instrument panel vents,floor vents and center console
• To improve the A/C cool down, drive with the windows slightly openfor 2–3 minutes after start up or until the vehicle has been “aired out.”For maxim
2. Temperature control: Controls the temperature of the airflow in thevehicle. If the main climate control system is in Max A/C mode (formanual contro
HEADLAMP CONTROLTurns the lamps off.Turns on the parking lamps,instrument panel lamps, licenseplate lamps and tail lamps.Turns the headlamps on.Autola
Warning symbols on your vehicleWhen you see this symbol, it isimperative that you consult therelevant section of this guide beforetouching or attempti
Foglamp control (if equipped)The headlamp control also operatesthe foglamps. The foglamps can beturned on only when the headlampcontrol is in the, orp
Flash to passPull toward you slightly to activateand release to deactivate.PANEL DIMMER CONTROLUse to adjust the brightness of theinstrument panel and
3. Turn on the low beam headlamps to illuminate the wall or screen andopen the hood. Cover one of the headlamps so no light hits the wall.4. On the wa
INTERIOR LAMPSDome/Map lamps (if equipped)The map lamps and controls arelocated on the dome lamp. Press thecontrols on either side of each maplamp to
Rear dome lampThe dome lamp lights when:• any door is opened (and switch isin middle position).• the instrument panel dimmerswitch is held up until th
Function Number ofbulbsTrade numberSecond row reading lamp 2 578Third row reading lamp 2 211-2License lamp 2 194All replacement bulbs are clear in col
5. Remove the bulb assembly byturning it counterclockwise andpulling it straight out.Handle a halogen headlamp bulb carefully and keep out ofchildren’
2. Remove the four screws from thetop and bottom front of theheadlamp assembly.3. Press the retaining clip at the topof the headlamp assembly whilepul
Replacing foglamp bulbs1. Make sure the headlamp switch isin the OFF position and then rotatethe foglamp bulb counterclockwiseand remove from foglamp
Replacing high-mount brakelamp bulbs1. Make sure the headlamp switch isin the OFF position and remove thetwo screws and then the lampassembly.2. Remov
Event Data RecordingOther modules in your vehicle — event data recorders — are capable ofcollecting and storing data during a crash or near crash even
MULTI-FUNCTION LEVERWindshield wiper: Rotate the endof the control away from you toincrease the speed of the wipers;rotate towards you to decrease the
Changing the wiper blades1. Pull the wiper arm away from thevehicle. Turn the blade at an anglefrom the wiper arm. Push the lockpin manually to releas
TRANSMISSION CONTROLTow/Haul feature (5–speed automatic transmission) (if equipped)To activate, press the transmissioncontrol switch (TCS) located on
Forward storage bin (if equipped)Press the release control to openthe storage compartment. The doorwill open slightly and can be movedto full open.The
AUXILIARY POWER POINT (12VDC)Power outlets are designed for accessory plugs only. Do not hangany type of accessory or accessory bracket from the plug.
• Located in the left side storagecompartment in the third rowseating position.• Located on the right trim panel inthe rear cargo area.POWER WINDOWSDo
One touch downAllows the driver’s window to openfully without holding the controldown. Press completely down onAUTO and release quickly. Pressagain to
Press the control located on thebottom of the mirror to turn themirror on or off. The mirror willautomatically return to the normalstate whenever the
Type BThe spotter mirror, below the mainmirror, is not heated and must beadjusted manually.Do not remove ice from the mirrors with a scraper or attemp
Clearance lamps (if equipped)Illuminates when the headlamps orparking lamps are switched on.This provides additional visibility ofyour vehicle to othe
Notice to owners of pickup trucks and utility type vehiclesUtility vehicles have a significantly higher rollover rate thanother types of vehicles.Befo
POWER ADJUSTABLE FOOT PEDALSThe accelerator and brake pedalshould only be adjusted when thevehicle is stopped and the gearshiftlever is in the P (Park
3. Press the SET ACCEL controland release it.4. Take your foot off the acceleratorpedal.5. The indicatorlight on theinstrument cluster will turn on.No
Reducing speed while using speed controlThere are two ways to reduce a setspeed:• Press and hold the COASTcontrol until you get to thedesired speed, t
STEERING WHEEL CONTROLS (IF EQUIPPED)These controls allow you to operate some radio and climate controlfeatures.Radio control features• Press MODE to
Selectable featuresEnglish/metric displayPress this control to change the tripcomputer display between metricand English units.Mode controlEach press
2. Press the E/M and MODEcontrols simultaneously. The displaywill illuminate the “AVG” indicator.While the indicator is lit, releaseboth controls to r
The compass heading is displayed in average fuel economy modes, fuelrange modes and temperature modes.The compass reading may be affected when you dri
1. Locate the trip computer located in the overhead console.2. Start the vehicle.3. Press and hold both tripcomputer controls. Afterapproximately eigh
ProgrammingDo not program HomeLink威 with the vehicle parked in the garage.Note: Your vehicle may require the ignition switch to be turned to theACC po
Note: If the indicator light blinks rapidly for two seconds and then turnsto a continuous red, proceed with steps 6 through 8 to completeprogramming o
These are some of the symbols you may see on your vehicle.Vehicle Symbol GlossarySafety AlertSee Owner’s GuideFasten Safety Belt Air Bag-FrontAir Bag-
Operating the HomeLink姞 Wireless Control SystemTo operate, simply press and releasethe appropriate HomeLink威 button.Activation will now occur for thet
CENTER CONSOLEYour vehicle may be equipped with a variety of console features. Theseinclude:• Utility compartment• Coin holder slots• Pen holderUse on
CARGO NET (IF EQUIPPED)The cargo net secures lightweightobjects in the cargo area. Attach thenet to the anchors provided.This net is not designed tore
The cargo doors and liftgate should be closed before driving yourvehicle. Make sure the liftgate and/or the cargo doors are closedto prevent exhaust f
KEYSThe key operates all locks on your vehicle. In case of loss, replacementkeys are available from your dealer.You should always carry a second key w
Childproof door locks• When these locks are set, therear doors cannot be opened fromthe inside.• The rear doors can be openedfrom the outside when the
Your vehicle is equipped with a remote entry system which allows you to:• unlock the vehicle doors withouta key.• lock all the vehicle doors withouta
The UNLOCK feature will work again after:• a door has become ajar,• the ignition is turned to the 4 (ON) position,• unlocking the vehicle using the ke
2. Do not wipe off any grease on thebattery terminals on the backsurface of the circuit board.3. Remove the old battery. Note: Please refer to local r
To reprogram the remote entrytransmitters:1. Ensure the vehicle iselectronically unlocked.2. Put the key in the ignition.3. Turn the key from the 2 (L
Vehicle Symbol GlossaryPower WindowsFront/RearPower Window LockoutChild Safety DoorLock/UnlockInterior LuggageCompartment ReleaseSymbolPanic Alarm Eng
The inside lights will not turn off if:• they have been turned on with the dimmer control, or• any door or the liftgate is open.The battery saver will
3. Press and hold the 1 • 2 for two seconds. This must be done withinfive seconds of completing Step 2.Your personal code is now erased and only the f
• the brake is pressed before reaching 5 mph (8 km/h), and• the vehicle is traveling more than 5 mph (8 km/h).To deactivate/reactivate the autolock fe
SECURILOCK姟 PASSIVE ANTI-THEFT SYSTEMSecuriLock娂 passive anti-theft system is an engine immobilizationsystem. This system is designed to help prevent
Automatic armingThe vehicle is armed immediatelyafter switching the ignition to the 3(OFF) position.TheTHEFTindicator will flashevery two seconds when
1. Insert a previously programmedcoded key into the ignition.2. Turn the ignition from the 3 (OFF) position to the 4 (ON) position.Keep the ignition i
SEATINGNotes:Reclining the seatback can cause an occupant to slide under theseat’s safety belt, resulting in severe personal injuries in theevent of a
60/40 split bench seat (if equipped)• Lift the release bar to move theseat forward or backward. Ensurethe seat is relatched into place.• Pull the seat
Memory seats and adjustable pedals (if equipped)This system allows automaticpositioning of the driver seat andadjustable pedals to twoprogrammable pos
Adjusting the front power seat (if equipped)The control is located on the outboard side of the seat cushion.Press to raise or lower the frontportion o
Commentaires sur ces manuels