Ford 2005 E-450 v.1 Manuel d'utilisateur télécharger pdf (Page 115)

• the jack is located in the rear

right-hand side of the cargo area.

7. Use the tapered end of the lug nut wrench to unscrew wheel

ornaments attached by retaining screws. Remove any wheel trim. Insert

the tapered end of the lug nut wrench behind wheel covers or hubcaps

and twist off.

8. Loosen the wheel nut by pulling up on the handle of the lug nut

wrench about one-half turn (counterclockwise). Do not remove the

wheel lug nuts until you raise the tire off the ground.

Replacing the tire

1. Assemble the jack handle sections together and lock into the jack. Use

the jack handle to slide the jack under the vehicle.

To lessen the risk of personal injury, do not put any part of your

body under the vehicle while changing a tire. Do not start the

engine when your vehicle is on the jack. The jack is only meant for

changing the tire.

2. Position the jack to raise the front or rear wheel.

REVIEW COPY

2005 Econoline (eco), Owners Guide (post-2002-fmt) (own2002),

Market: USA_English (fus)

Tires, Wheels and Loading

115

1 2 ... 110 111 112 113 114 115 116 117 118 119 120 ... 247 248

Pas de commentaire

Ford 2005 E-450 v.1 Manuel d'utilisateur Page 115