Ford 2005 E-450 v.1 Manuel d'utilisateur télécharger pdf (Page 45)

• Aerodynamic: Locate the

vertical adjuster (2) for each

headlamp. Adjust the aim by

turning the adjuster control either

clockwise (to adjust up) or

counterclockwise (to adjust

down).

• Sealed beam: Locate the vertical

adjuster (1) for each headlamp.

Adjust the aim by turning the

adjuster control either clockwise

(to adjust up) or

counterclockwise (to adjust

down).

6. In addition to the horizontal line

marked in step 2, a pair of vertical

lines (5) must be marked at the

center line of the headlamps on the

wall or screen.

7. On the wall or screen, locate the high intensity area of the beam

pattern. The left edge of the high intensity area should be even with the

vertical line corresponding to the headlamp under adjustment. If the left

edge of the high intensity area is not even with the vertical line, follow

the next step to adjust it.

• Aerodynamic: Locate the horizontal adjuster (1) for each headlamp.

Turn it clockwise or counterclockwise, to place the left edge of the

high intensity area even with the vertical line corresponding to the

headlamp under adjustment.

• Sealed beam: Locate the horizontal adjuster (2) for each headlamp.

Turn it clockwise or counterclockwise, to place the left edge of the

high intensity area even with the vertical line corresponding to the

headlamp under adjustment.

REVIEW COPY

2005 Econoline (eco), Owners Guide (post-2002-fmt) (own2002),

Market: USA_English (fus)

Lights

1 2 ... 40 41 42 43 44 45 46 47 48 49 50 ... 247 248

Pas de commentaire

Ford 2005 E-450 v.1 Manuel d'utilisateur Page 45