Ford 2005 E-450 v.1 Manuel d'utilisateur télécharger pdf (Page 224)

High fluid level

Fluid levels above the safe range

may result in transmission failure.

An overfill condition of transmission

fluid may cause shift and/or

engagement concerns and/or possible damage.

High fluid levels can be caused by an overheating condition.

Adjusting automatic transmission fluid levels

Before adding any fluid, make sure the correct type is used. The type of

fluid used is normally indicated on the dipstick and also in the

Lubricant specifications section in this chapter.

Use of a non-approved automatic transmission fluid may cause

internal transmission component damage.

If necessary, add fluid in 250 ml (1/2 pint) increments through the filler

tube until the level is correct.

If an overfill occurs, excess fluid

should be removed by a qualified

technician.

An overfill condition of

transmission fluid may cause shift and/or engagement concerns

and/or possible damage.

Do not use supplemental transmission fluid additives, treatments or

cleaning agents. The use of these materials may affect transmission

operation and result in damage to internal transmission components.

REVIEW COPY

2005 Econoline (eco), Owners Guide (post-2002-fmt) (own2002),

Market: USA_English (fus)

Maintenance and Specifications

224

1 2 ... 219 220 221 222 223 224 225 226 227 228 229 ... 247 248

Pas de commentaire

Ford 2005 E-450 v.1 Manuel d'utilisateur Page 224