Ford 2012 Shelby GT 500 v.1 Manuel d'utilisateur télécharger pdf (Page 58)

100

101

• (1) 8 feet (2.4 meters)

• (2) Center height of lamp to

ground

• (3) 25 feet (7.6 meters)

• (4) Horizontal reference line

2. Measure the height from the

center of your headlamp to the

ground and mark an 8 foot

(2.4 meter) horizontal reference line

on the vertical wall or screen at this

height (a piece of masking tape works well). The center of the lamp is

marked bya3mmcircleontheheadlamp lens.

3. Turn on the low beam headlamps to illuminate the wall or screen and

open the hood. To see a clearer light pattern for adjusting, block the

light from one headlamp while adjusting the other.

For vehicles with halogen headlamps:

On the wall or screen you will

observe a flat zone of high intensity

light located at the top of the right

hand portion of the beam pattern. If

the top edge of the high intensity

light zone is not at the horizontal

reference line, the headlamp will

need to be adjusted.

For vehicles with HID headlamps:

There is a distinct cut-off (change

from light to dark) in the left

portion of the beam pattern. The

top edge of this cut-off should be

positioned two inches (50.8 mm)

below the horizontal reference line.

Lights

2012 05+ Mustang (197)

Owners Guide, 1st Printing

USA (fus)

1 2 ... 53 54 55 56 57 58 59 60 61 62 63 ... 345 346

Commentaires sur ces manuels

Pas de commentaire

Ford 2012 Shelby GT 500 v.1 Manuel d'utilisateur Page 58

Commentaires sur ces manuels

Produits connexes et manuels pour Voitures Ford 2012 Shelby GT 500 v.1