Ford 2012 Shelby GT 500 v.1 Manuel d'utilisateur télécharger pdf (Page 303)

Allow the vehicle to sit for at least eight hours without starting the

engine. Then, start the engine and complete the above driving cycle. The

engine must warm up to its normal operating temperature. Once started,

do not turn off the engine until the above driving cycle is complete. If

the vehicle is still not ready for I/M testing, the above driving cycle will

have to be repeated.

BRAKE/CLUTCH FLUID

Brake and clutch (if equipped) systems are supplied from the same

reservoir.

The fluid level will drop slowly as

the brakes wear, and will rise when

the brake components are replaced.

Fluid levels between the MIN and

MAX lines are within the normal

operating range; there is no need to

add fluid. If the fluid levels are

outside of the normal operating

range, the performance of the

system could be compromised; seek

service from your authorized dealer

immediately.

TRANSMISSION FLUID

Checking automatic transmission fluid

The automatic transmission does not have an underhood transmission

fluid dipstick.

Refer to your scheduled maintenance information for scheduled

intervals for fluid checks and changes. Your transmission does not

consume fluid. However, the fluid level should be checked if the

transmission is not working properly, (i.e., if the transmission slips or

shifts slowly) or if you notice some sign of fluid leakage.

Transmission fluid should be checked and, if required, added by

an authorized dealer.

Do not use supplemental transmission fluid additives, treatments or

cleaning agents. The use of these materials may affect transmission

operation and result in damage to internal transmission components.

Maintenance and Specifications

303

2012 05+ Mustang (197)

Owners Guide, 1st Printing

USA (fus)

1 2 ... 298 299 300 301 302 303 304 305 306 307 308 ... 345 346

Pas de commentaire

Ford 2012 Shelby GT 500 v.1 Manuel d'utilisateur Page 303