Ford 2012 Shelby GT 500 v.1 Manuel d'utilisateur télécharger pdf (Page 65)

100

101

3. Unbolt the three tail lamp

attachment nuts and remove the

lamp assembly.

4. Rotate the LED assembly

counterclockwise and remove it

from the lamp assembly.

5. Disconnect the LED assembly

from the electrical connector and

replace the LED assembly.

6. Install new LED assembly in

reverse order.

Replacing backup bulbs

The backup lamps are located in the tail lamp assembly. Follow the same

steps to replace either bulb.

1. Make sure the headlamp switch is

in the off position, then open the

trunk.

2. Carefully remove the fasteners

around the lamp area, then remove

the interior trunk trim.

3. Unbolt the three tail lamp

attachment nuts and remove the

lamp assembly.

4. Rotate the bulb socket

counterclockwise and remove it from the lamp assembly.

5. Pull the bulb straight out from

the socket.

Install the new bulb in reverse

order.

Lights

2012 05+ Mustang (197)

Owners Guide, 1st Printing

USA (fus)

1 2 ... 60 61 62 63 64 65 66 67 68 69 70 ... 345 346

Commentaires sur ces manuels

Pas de commentaire

Ford 2012 Shelby GT 500 v.1 Manuel d'utilisateur Page 65

Commentaires sur ces manuels

Produits connexes et manuels pour Voitures Ford 2012 Shelby GT 500 v.1