Ford 2012 Shelby GT 500 v.1 Manuel d'utilisateur télécharger pdf (Page 203)

STARTING

Positions of the ignition

1. Off — locks the automatic

transmission gearshift lever and

allows key removal. Note: In order

to switch off the engine while the

vehicle is in motion, shift to neutral

and use the brakes to bring the

vehicle to a safe stop. After the

vehicle has stopped, turn the engine

off and shift into park. Then, turn

the key to the accessory or off

position.

Note: The ignition key cannot be removed from the ignition unless the

gearshift lever is securely latched in P (Park).

2. Accessory — allows the electrical accessories such as the radio to

operate while the engine is not running.

3. On — all electrical circuits operational. Warning lights illuminated. Key

position when driving.

4. Start — cranks the engine. Release the key as soon as the engine

starts.

Preparing to start your vehicle

Engine starting is controlled by the powertrain control system.

This system meets all Canadian interference-causing equipment standard

requirements regulating the impulse electrical field strength of radio

noise.

When starting a fuel-injected engine, don’t press the accelerator before

or during starting. Only use the accelerator when you have difficulty

starting the engine. For more information on starting the vehicle, refer to

Starting the engine in this chapter.

WARNING: Extended idling at high engine speeds can produce

very high temperatures in the engine and exhaust system,

creating the risk of fire or other damage.

Driving

203

2012 05+ Mustang (197)

Owners Guide, 1st Printing

USA (fus)

1 2 ... 198 199 200 201 202 203 204 205 206 207 208 ... 345 346

Pas de commentaire

Ford 2012 Shelby GT 500 v.1 Manuel d'utilisateur Page 203