Ford 2012 Shelby GT 500 v.1 Manuel d'utilisateur télécharger pdf (Page 64)

100

101

Replacing front sidemarker bulb

1. Make sure the headlamp control is in the off position.

2. Remove the hex head screws

attaching the underbody forward

aeroshield and remove to gain

access to the front sidemarker

assembly.

3. Rotate the socket counterclockwise and remove from the lamp

assembly.

4. Carefully pull the bulb straight

out of socket.

Replacing tail lamp/brake/rear turn signal lamps

See your authorized dealer for replacement LED assembly.

The tail lamp, the brake lamp and the turn signal lamp are located in the

tail lamp assembly. Follow the same steps to replace these lamps.

1. Make sure the headlamp switch is

in the off position, then open the

trunk.

2. Carefully remove the fasteners

around the lamp area and then

remove the interior trunk trim.

Lights

2012 05+ Mustang (197)

Owners Guide, 1st Printing

USA (fus)

1 2 ... 59 60 61 62 63 64 65 66 67 68 69 ... 345 346

Commentaires sur ces manuels

Pas de commentaire

Ford 2012 Shelby GT 500 v.1 Manuel d'utilisateur Page 64

Commentaires sur ces manuels

Produits connexes et manuels pour Voitures Ford 2012 Shelby GT 500 v.1