Ford 2012 Shelby GT 500 v.1 Manuel d'utilisateur télécharger pdf (Page 206)

3. Turn the key to 3 (on) without

turning the key to 4 (start).

Some warning lights will briefly illuminate. See Warning lights and

chimes in the Instrument Cluster chapter for more information

regarding the warning lights.

Starting the engine

1. Turn the key to 3 (on) without

turning the key to 4 (start). If there

is difficulty in turning the key,

rotate the steering wheel until the

key turns freely.

2. Turn the key to 4 (start), then

release the key as soon as the

engine begins cranking. Your vehicle

has a computer assisted cranking

system that assists in starting the

engine. After releasing the key from

the 4 (start) position, the engine may continue cranking for up to

10 seconds or until the vehicle starts.

Note: Cranking may be stopped at any time by turning the key to the off

position.

Note: If the engine does not start within five seconds on the first try,

turn the key to off, wait 10 seconds and try again. If the engine still fails

to start, press and hold the accelerator to the floor and try again; this

will allow the engine to crank with the fuel shut off in case the engine is

flooded with fuel.

Guarding against exhaust fumes

Carbon monoxide is present in exhaust fumes. Take precautions to avoid

its dangerous effects.

Driving

206

2012 05+ Mustang (197)

Owners Guide, 1st Printing

USA (fus)

1 2 ... 201 202 203 204 205 206 207 208 209 210 211 ... 345 346

Pas de commentaire

Ford 2012 Shelby GT 500 v.1 Manuel d'utilisateur Page 206