Ford 2012 Fusion v.2 Manuel d'utilisateur télécharger pdf (Page 329)

This fluid level is within the normal

operating fluid range and does not

require that you have your fluid

level readjusted after recreational

flat tow operation.

See the Tires, Wheels and Loading chapter for more information on

recreational flat towing.

Checking and adding manual transmission fluid (if equipped)

1. Park the vehicle on a level

surface.

2. Engage the parking brake fully –

put in first gear.

3. Ensure the vehicle cannot move.

4. Clean the filler plug.

5. Remove the filler plug and

inspect the fluid level.

6. Fluid level should be at bottom of

the opening.

7. Add enough fluid through the filler opening so that the fluid level is

within 3/8 inch (10mm) of the bottom of the filler hole with the vehicle

on a level surface.

8. Install and tighten the fill plug securely.

Use only fluid that meets Ford specifications. Refer to the Maintenance

product specifications and capacities section in this chapter.

AIR FILTER

Refer to scheduled maintenance information for the appropriate

intervals for changing the air filter element.

When changing the air filter element, use only the air filter element

listed. Refer to Motorcraft威 part numbers in this chapter.

WARNING: To reduce the risk of vehicle damage and/or

personal burn injuries do not start your engine with the air

cleaner removed and do not remove it while the engine is running.

DO NOT ADD

ADD (CHECK HOT)

Maintenance and Specifications

329

2012 Fusion (fsn)

Owners Guide, 2nd Printing

USA (fus)

1 2 ... 324 325 326 327 328 329 330 331 332 333 334 ... 372 373

Pas de commentaire

Ford 2012 Fusion v.2 Manuel d'utilisateur Page 329