Ford 2012 Fusion v.2 Manuel d'utilisateur télécharger pdf (Page 306)

100

101

Add the proper mixture of coolant and water to the cooling system by

following these steps:

1. Before you begin, turn the engine off and let it cool.

2. When the engine is cool, wrap a thick cloth around the coolant

pressure relief cap on the coolant reservoir (a translucent plastic bottle).

Slowly turn cap counterclockwise (left) until pressure begins to release.

3. Step back while the pressure releases.

4. When you are sure that all the pressure has been released, use the

cloth to turn it counterclockwise and remove the cap.

• 2.5L coolant bleed valve

• 3.0L coolant bleed valve

5. Open the coolant bleed valve on the back of the engine water outlet

for the 2.5L engine or in the thermostat housing for the 3.0L engine.

6. Fill the coolant reservoir slowly with the proper coolant mixture, to

within the COLD FILL RANGE or the FULL COLD level on the reservoir.

If you removed the radiator cap in an overflow system, fill the radiator

until the coolant is visible and radiator is almost full.

Maintenance and Specifications

306

2012 Fusion (fsn)

Owners Guide, 2nd Printing

USA (fus)

1 2 ... 301 302 303 304 305 306 307 308 309 310 311 ... 372 373

Commentaires sur ces manuels

Pas de commentaire

Ford 2012 Fusion v.2 Manuel d'utilisateur Page 306

Commentaires sur ces manuels

Produits connexes et manuels pour Voitures Ford 2012 Fusion v.2