Ford 2012 Fusion v.2 Manuel d'utilisateur télécharger pdf (Page 270)

Park the booster vehicle close to the hood of the disabled vehicle making

sure the two vehicles do not touch. Set the parking brake on both vehicles

and stay clear of the engine cooling fan and other moving parts.

4. Check all battery terminals and remove any excessive corrosion before

you attach the battery cables. Ensure that vent caps are tight and level.

5. Turn the heater fan on in both vehicles to protect from any electrical

surges. Turn all other accessories off.

Connecting the jumper cables

Note: In the illustration, the vehicle on the bottom is used to designate

the assisting (boosting) battery.

1. Connect the positive (+) jumper

cable to the positive (+) terminal of

the discharged battery.

2. Connect the other end of the

positive (+) cable to the positive

(+) terminal of the assisting battery.

3. Connect the negative (-) cable to

the negative (-) terminal of the

assisting battery.

4. Make the final connection of the

negative (-) cable to an exposed

metal part of the stalled vehicle’s

engine, away from the battery and

the carburetor/fuel injection system.

Note: Do not attach the negative (-) cable to fuel lines, engine rocker

covers, the intake manifold or electrical components as grounding points.

WARNING: Do not connect the end of the second cable to the

negative (-) terminal of the battery to be jumped. A spark may

cause an explosion of the gases that surround the battery.

Ensure that the cables are clear of fan blades, belts, moving parts of both

engines, or any fuel delivery system parts.

–

Roadside Emergencies

270

2012 Fusion (fsn)

Owners Guide, 2nd Printing

USA (fus)

1 2 ... 265 266 267 268 269 270 271 272 273 274 275 ... 372 373

Pas de commentaire

Ford 2012 Fusion v.2 Manuel d'utilisateur Page 270