Ford 2012 Fusion v.2 Manuel d'utilisateur télécharger pdf (Page 65)

100

101

6. Disconnect the electrical

connector.

7. Carefully pull bulb straight out of

socket and install the new one.

WARNING: Handle a halogen headlamp bulb carefully and keep

out of children’s reach. Grasp the bulb only by its plastic base

and do not touch the glass. The oil from your hand could cause the

bulb to break the next time the headlamps are operated.

8. Install the rubber bulb access cover to the housing.

9. Re-apply pressure around the housing to make sure the protective

cover is completely seated.

10. Turn the headlamps on and make sure they work properly. If the

headlamp was correctly aligned before you changed the bulb, you should

not need to align it again.

Low beam bulb replacement

For passenger side replacement of the low beam bulb, do the

following:

1. Make sure headlamp control is in the off position, then open the hood.

2. At the wheel well, remove the

press pins from the splash shield.

Lights

2012 Fusion (fsn)

Owners Guide, 2nd Printing

USA (fus)

1 2 ... 60 61 62 63 64 65 66 67 68 69 70 ... 372 373

Commentaires sur ces manuels

Pas de commentaire

Ford 2012 Fusion v.2 Manuel d'utilisateur Page 65

Commentaires sur ces manuels

Produits connexes et manuels pour Voitures Ford 2012 Fusion v.2