Ford 2012 Fusion v.2 Manuel d'utilisateur télécharger pdf (Page 299)

100

101

• 3.5L V6 engine

If required, add engine oil to the engine. Refer to Adding engine oil in

this chapter.

•Do not overfill the engine with

oil. Oil levels above this mark

may cause engine damage. If the

engine is overfilled, some oil must

be removed from the engine by an

authorized dealer.

7. Put the dipstick back in and ensure it is fully seated.

Adding engine oil

1. Check the engine oil. For instructions, refer to Checking the engine

oil in this chapter.

2. If the engine oil level is not within the normal operating range, add

only certified engine oil of the recommended viscosity. Remove the

engine oil filler cap and use a funnel to pour the engine oil into the

opening.

3. Recheck the engine oil level. Make sure the oil level is not above the

normal operating range on the engine oil level dipstick.

4. Install the dipstick and ensure it is fully seated.

5. Fully install the engine oil filler cap by turning the filler cap clockwise

until it stops.

To avoid possible oil loss, DO NOT operate the vehicle with the

engine oil level dipstick and/or the engine oil filler cap removed.

Maintenance and Specifications

299

2012 Fusion (fsn)

Owners Guide, 2nd Printing

USA (fus)

1 2 ... 294 295 296 297 298 299 300 301 302 303 304 ... 372 373

Commentaires sur ces manuels

Pas de commentaire

Ford 2012 Fusion v.2 Manuel d'utilisateur Page 299

Commentaires sur ces manuels

Produits connexes et manuels pour Voitures Ford 2012 Fusion v.2