Ford 2012 Focus v.1 Manuel d'utilisateur télécharger pdf (Page 258)

STARTING

Positions of the ignition

If your vehicle is equipped with a push button start system, refer to

Push button start system in this section for ignition modes.

1. 0 (off) — locks the automatic

transmission gearshift lever and

allows key removal. This position

also shuts the engine and all

electrical accessories off. Note: In

order to switch off the engine while

the vehicle is in motion, shift to

neutral and use the brakes to bring

the vehicle to a safe stop. After the vehicle has stopped, turn the engine

off and shift into park. Then, turn the key to the accessory or off

position.

2. I (accessory) — allows the electrical accessories such as the radio to

operate while the engine is not running.

3. II (on) — all electrical circuits operational. Warning lights illuminated.

Key position when driving.

4. III (start) — cranks the engine. Release the key as soon as the engine

starts.

Preparing to start your vehicle

Engine starting is controlled by the powertrain control system.

This system meets all Canadian interference-causing equipment standard

requirements regulating the impulse electrical field strength of radio

noise.

When starting a fuel-injected engine, don’t press the accelerator before

or during starting. Only use the accelerator when you have difficulty

starting the engine. For more information on starting the vehicle, refer to

Starting the engine in this chapter.

WARNING: Extended idling at high engine speeds can produce

very high temperatures in the engine and exhaust system,

creating the risk of fire or other damage.

Driving

258

2012 Focus (foc)

Owners Guide, 1st Printing

USA (fus)

1 2 ... 253 254 255 256 257 258 259 260 261 262 263 ... 405 406

Pas de commentaire

Ford 2012 Focus v.1 Manuel d'utilisateur Page 258