Ford 2012 Focus v.1 Manuel d'utilisateur télécharger pdf (Page 194)

The driver and front passenger Belt-Minder威 features can be

deactivated/activated by performing the following procedure:

Before following the procedure, make sure that:

• The parking brake is set

• The gearshift is in P (Park) (automatic transmission) and in neutral

(manual transmission)

• The ignition is off

• The driver and front passenger safety belts are unbuckled

WARNING: While the design allows you to deactivate your

Belt-Minder威, this system is designed to improve your chances of

being safely belted and surviving an accident. We recommend you

leave the Belt-Minder威 system activated for yourself and others who

may use the vehicle. To reduce the risk of injury, do not

deactivate/activate the Belt-Minder威 feature while driving the vehicle.

1. Turn the ignition on. DO NOT START THE ENGINE.

2. Wait until the safety belt warning light turns off (approximately one

minute).

• Once the next step is started, the procedure must be completed

within 60 seconds.

3. For the seating position being disabled, buckle then unbuckle the

safety belt four times at a moderate speed, ending in the unbuckled

state.

• After Step 3, the safety belt warning light will flash for three times as

a confirmation

4. Within approximately seven seconds of the light turning off, buckle

then unbuckle the safety belt.

• This will disable the Belt-Minder feature for that seating position if it

is currently enabled.

• This will enable the Belt-Minder威 feature for that seating position if it

is currently disabled.

Seating and Safety Restraints

194

2012 Focus (foc)

Owners Guide, 1st Printing

USA (fus)

1 2 ... 189 190 191 192 193 194 195 196 197 198 199 ... 405 406

Pas de commentaire

Ford 2012 Focus v.1 Manuel d'utilisateur Page 194