Ford 2012 Focus v.1 Manuel d'utilisateur télécharger pdf (Page 365)

100

101

Checking and adding manual transmission fluid (if equipped)

1. Clean the filler plug.

2. Remove the filler plug and

inspect the fluid level.

3. Fluid level should be at the

bottom of the opening.

4. Add enough fluid through the

filler opening so that the fluid level

is at the bottom of the opening.

5. Install and tighten the fill plug

securely.

Use only fluid that meets Ford specifications. Refer to the Maintenance

product specifications and capacities section in this chapter.

AIR FILTER

Refer to scheduled maintenance information for the appropriate

intervals for changing the air filter element.

When changing the air filter element, use only the air filter element

listed. Refer to Motorcraft威 part numbers in this chapter.

WARNING: To reduce the risk of vehicle damage and/or

personal burn injuries do not start your engine with the air

cleaner removed and do not remove it while the engine is running.

Changing the air filter element

1. Loosen the screws that secure

the air filter housing cover.

2. Carefully separate the two halves

of the air filter housing.

3. Remove the air filter element

from the air filter housing.

4. Wipe the air filter housing and

cover clean to remove any dirt or

debris and to ensure good sealing.

5. Install a new air filter element.

Slide the open end of the air filter element in first, below the tab. Then,

push the bottom of the closed end in.

Maintenance and Specifications

365

2012 Focus (foc)

Owners Guide, 1st Printing

USA (fus)

1 2 ... 360 361 362 363 364 365 366 367 368 369 370 ... 405 406

Commentaires sur ces manuels

Pas de commentaire

Ford 2012 Focus v.1 Manuel d'utilisateur Page 365

Commentaires sur ces manuels

Produits connexes et manuels pour Voitures Ford 2012 Focus v.1