Ford 2012 Focus v.1 Manuel d'utilisateur télécharger pdf (Page 128)

Ambient lighting (if equipped)

Illuminates several areas (footwells,

cupholder and doors ) with a choice

of several colors. The ambient

lighting control switch is located in

the overhead console.

• To activate, rotate the control

knob past the first detent and

adjust to the desired brightness.

• Use the left color pallet control

switch to cycle through the color

choices.

• Use the right search mode control switch to activate all ambient light

areas and all dome lamps.

The lights come on whenever the ignition is in the on position and the

headlamps are on.

Note: The ambient lights will stay on until the ignition is placed in the

off position and the vehicle is locked or the accessory delay timer

expires.

BULB REPLACEMENT

Lamp assembly condensation

Exterior lamps are vented to accommodate normal changes in pressure.

Condensation can be a natural by-product of this design. When moist air

enters the lamp assembly through the vents, there is a possibility that

condensation can occur when the temperature is cold. When normal

condensation occurs, a thin film of mist can form on the interior of the

lens. The thin mist eventually clears and exits through the vents during

normal operation. Clearing time may take as long as 48 hours under dry

weather conditions.

Examples of acceptable condensation are:

• Presence of thin mist (no streaks, drip marks or droplets)

• Fine mist covers less than 50% of the lens

Examples of unacceptable moisture (usually caused by a lamp water

leak) are:

• Water puddle inside the lamp

• Large water droplets, drip marks or streaks present on the interior of

the lens

Lights

128

2012 Focus (foc)

Owners Guide, 1st Printing

USA (fus)

1 2 ... 123 124 125 126 127 128 129 130 131 132 133 ... 405 406

Pas de commentaire

Ford 2012 Focus v.1 Manuel d'utilisateur Page 128