Ford 2011 Crown Victoria v.1 Manuel d'utilisateur télécharger pdf (Page 256)

Low fluid level

Do not drive the vehicle if the fluid

level is at the bottom of the dipstick

and the ambient temperature is

above 50°F (10°C).

Correct fluid level

The transmission fluid should be checked at normal operating

temperature 150°F-170°F (66°C-77°C) on a level surface. The normal

operating temperature can be reached after approximately 20 miles

(30 km) of driving.

You can check the fluid without driving if the ambient temperature is

above 50°F (10°C). However, if fluid is added at this time, an overfill

condition could result when the vehicle reaches normal operating

temperature.

The transmission fluid should be in

this range if at normal operating

temperature (150°F-170°F

[66°C-77°C]).

The transmission fluid should be in

this range if at ambient temperature

(50°F-95°F [10°C-35°C]).

High fluid level

Fluid levels above the safe range

may result in transmission failure.

An overfill condition of transmission

fluid may cause shift and/or

engagement concerns and/or

possible damage.

High fluid levels can be caused by an overheating condition.

Adjusting automatic transmission fluid levels

Before adding any fluid, make sure the correct type is used. The type of

fluid used is normally indicated on the dipstick. Refer to Maintenance

product specifications and capacities in this chapter.

Maintenance and Specifications

256

2011 Crown Victoria (cro)

Owners Guide, 1st Printing

USA (fus)

1 2 ... 251 252 253 254 255 256 257 258 259 260 261 ... 330 331

Pas de commentaire

Ford 2011 Crown Victoria v.1 Manuel d'utilisateur Page 256