Ford 2011 Explorer v.1 Manuel d'utilisateur

Naviguer en ligne ou télécharger Manuel d'utilisateur pour Voitures Ford 2011 Explorer v.1. FORD 2011 Explorer v.1 User Manual Manuel d'utilisatio

  • Télécharger
  • Ajouter à mon manuel
  • Imprimer
  • Page
    / 449
  • Table des matières
  • MARQUE LIVRES
  • Noté. / 5. Basé sur avis des utilisateurs

Résumé du contenu

Page 1 - OWNER’S

+++++ 2011 EXPLORER++++ 2011 Explorer Owner’s Guide OWNER’S GUIDENOVEMBER 2010FIRST PRINTINGOWNER’S GUIDEEXPLORERLITHO IN U.S.A. FORDOWNER.COMWWW.FORD

Page 2 - Table of Contents

This data can help provide a better understanding of thecircumstances in which crashes and injuries occur.Note: EDR data is recorded by your vehicle o

Page 3

One-touch up or downThis feature allows the driver’s window (and passenger’s window, if equippedwith this feature) to open or close fully without hold

Page 4

INTERIOR MIRRORThe interior rear view mirror has two pivot points on the support armwhich lets you adjust the mirror up or down and from side to side.

Page 5

EXTERIOR MIRRORSPower side view mirrorsWARNING: Do not adjust the mirror while the vehicle is inmotion.To adjust your mirrors:1. Press the left or rig

Page 6

Fold-away mirrorsFold the side mirrors in carefully before driving through a narrow space,like an automatic car wash.Powerfold mirrors (if equipped)Yo

Page 7

POWER ADJUSTABLE FOOT PEDALS (IF EQUIPPED)The accelerator and brake pedalshould only be adjusted when thevehicle is stopped and the gearshiftlever is

Page 8

Setting speed controlTo set speed control:1. Press ON upward and release.2. Accelerate to the desired speed.3. Press SET upward and release.4. Take yo

Page 9

Turning off speed controlTo turn off the speed control, press OFF downward or turn off the ignition.Note: When you turn off the speed control or the i

Page 10 - Introduction

Using adaptive cruise controlNote: It is the drivers responsibility to stay alert, drive safely and be incontrol of the vehicle at all times.The contr

Page 11

Following a vehicleWARNING: When following a vehicle in front of you, the vehiclewill not decelerate automatically to a stop, nor will the vehiclealwa

Page 12

Setting the gap distanceThe distance between your vehicleand the vehicle in front of you canbe decreased or increased bypressing the GAP control up or

Page 13

Additionally, when you connect to Traffic, Directions andInformation (if equipped, U.S. only) the service uses GPStechnology and advanced vehicle sens

Page 14

Changing the set speedThere are three ways to change the set speed:• Accelerate or brake to the desired speed and press SET upward andrelease.• Increa

Page 15 - Instrument Cluster

Detection issuesThe radar sensor has a limited field of vision. In some situations it maynot detect vehicles at all or detect a vehicle later than exp

Page 16

• There may be issues with the detection of vehicles in front whendriving into and coming out of a bend or curve in the road.In these cases ACC may br

Page 17

Cause ActionThe surface of the radar in the grilleis dirty or obstructed in some wayClean the grille surface in front ofthe radar or remove the object

Page 18

STEERING WHEEL CONTROLSAudio control featuresSEEK: Press up or down to selectthe next/previous radio stationpreset, CD track or satellite radio (ifequ

Page 19

• Navigation (if equipped)• Redundant center stack display• Routed map• Phone• Redundant center stack display• Favorite contacts• Climate• On• Fan spe

Page 20

To open the dual panel moonroof: Press and release the SLIDEcontrol. The moon roof willautomatically open. If the sunscreenis closed, it will automati

Page 21

UNIVERSAL GARAGE DOOR OPENER (IF EQUIPPED)Your vehicle may be equipped with a universal garage door opener whichcan be used to replace the common hand

Page 22

Types of garage door openers (rolling code and fixed code)The Car2U威 Home Automation System may be programmed to operaterolling code and fixed code ga

Page 23

Make sure that your key is on and engine off while programming thetransmitter.1. Firmly press the two outerCar2U威 system buttons for1–2 seconds, then

Page 24

EXPORT UNIQUE (NON–UNITED STATES/CANADA) VEHICLESPECIFIC INFORMATIONFor your particular global region, your vehicle may be equipped withfeatures and o

Page 25

4. Press and release the button again. The garage door should move,confirming that programming is successful. If your garage door does notoperate, rep

Page 26

Switchposition 12345678 9101112Up, onor +LLLLLLLL L L L LMiddle,neutralor 0MMMMMMMMMMMMDown,offor–RRRRRRRR R R R RL=left; M=middle; R=right3. To input

Page 27

6. The indicator light will (begin to) blink rapidly until programming iscomplete. If your garage door opener does not operate following thesesteps, r

Page 28

POSITIVE RETENTION FLOOR MATWARNING: Do not install additional floor mats on top of thefactory installed floor mats as they may interfere with theacce

Page 29

Utility hookThe utility hook can be used tohang small items such as grocerybags, etc. Do not hang more than10 lb (4.5 kg) on the hook.MANUAL LIFTGATE

Page 30

WARNING: Make sure that the liftgate is closed to preventexhaust fumes from being drawn into the vehicle. This will alsoprevent passengers and cargo f

Page 31

If the liftgate reverses and starts to close after an open request, a fastcontinuous chime indicates excessive load on the gate or a possible strutfai

Page 32

To power open the liftgate withoutside liftgate control button:1. Unlock the liftgate with thetransmitter or power door unlockcontrol. If the intellig

Page 33

The new open liftgate height will now be recalled when the powerliftgate is opened. To change the programmed height, repeat the aboveprocedure. Once t

Page 34

Note: If the power liftgate system is turned off in the message center,the system cannot be activated with the outside release handle orcontrol button

Page 35

These are some of the symbols you may see on your vehicle.Vehicle Symbol GlossarySafety AlertSee Owner’s GuideFasten Safety Belt Airbag - FrontAirbag

Page 36

2. Slide the crossbar to the desired position. This may require someoneon each side of the crossbar.3. Tighten the tie-down hooks at both sides of the

Page 37

KEYSIntegrated keyhead transmitters (IKTs) (if equipped)Your vehicle may be equipped withtwo integrated keyhead transmitters(IKTs). The key blade func

Page 38

Intelligent Access Key (IA key) (if equipped)Your vehicle may be equipped withtwo intelligent access keys whichoperate the power locks and theremote s

Page 39

MYKEY™The MyKey™ feature allows you to program a restricted driving mode topromote good driving habits. All but one of the keys programmed to thevehic

Page 40

Create a MyKey™To program MyKey™ on one of the keys programmed to the vehicle,insert the key that you want to make a MyKey™ into the ignition. Forvehi

Page 41

Check MyKey™ system statusThe vehicle’s message center information menu will provide the status ofthe following MyKey™ parameters:• MYKEY MILES (km) —

Page 42

To program a non Ford-approved remote start system as MyKey™, dothe following:1. Enter the vehicle and close all doors.2. Remote start the vehicle usi

Page 43

TroubleshootingCondition Potential CausesCan’t create aMyKey™• Key in the ignition is already a MyKey™.• Key in the ignition is the last remaining adm

Page 44

Condition Potential CausesNo MyKey™function• An admin intelligent access key is present at apush-and-start vehicle.• No MyKeys™ are programmed to the

Page 45

POWER DOOR LOCKS• Press the control to unlock alldoors.• Press thecontrol to lock alldoors.Smart unlocks for integrated keyhead transmitter (IKT)This

Page 46

Vehicle Symbol GlossaryPower WindowsFront/RearPower Window LockoutChild Safety DoorLock/UnlockInterior LuggageCompartment ReleasePanic Alarm Engine Oi

Page 47

In order to override the smart unlock feature and intentionally lock theIA key inside the vehicle, you can lock your vehicle after all doors areclosed

Page 48

Power door lock switch autolock enable/disable procedureBefore starting, ensure the ignition is off and all vehicle doors are closed.You must complete

Page 49

Deactivating/activating autounlock featureYour vehicle comes with the autounlock feature activated; there are threemethods to enable/disable this feat

Page 50

CHILDPROOF DOOR LOCKS• When these locks are set, therear doors cannot be opened fromthe inside.• The rear doors can be openedfrom the outside when the

Page 51

The transmitter allows you to:• remotely unlock the vehicle doors.• remotely lock all the vehicle doors.• remotely open the power liftgate (if equippe

Page 52 - Entertainment Systems

To lock the doors, press and hold for half a second the lock area (blackbutton) on either front door handle.Activating intelligent access at the liftg

Page 53

Car finderPresstwice within three seconds. The horn will chirp and the turnlamps will flash. It is recommended that this method be used to locateyour

Page 54

Programming the memory feature to the transmitterTo activate this feature:1. Move the driver seat and power mirrors to the desired positions usingthe

Page 55

Replacing the batteryThe integrated keyhead transmitter (IKT) or intelligent access key (IAkey) uses one coin type three-volt lithium battery CR2032 o

Page 56

2. Remove the old battery.Note: Please refer to localregulations when disposing oftransmitter batteries.3. Insert the new battery. Refer tothe instruc

Page 57

WARNING LIGHTS AND CHIMESBase instrument cluster with standard measure shown; metricsimilarOptional instrument cluster with standard measure shown; me

Page 58

Illuminated exitWhen all vehicle doors are closed, the ignition is turned off and the keyis removed from the ignition (IKT only), the interior dome la

Page 59

To help make the vehicle as comfortable as possible, the engine idle canbe increased during a remote start. You can enable or disable engine idleincre

Page 60

Note: If the vehicle has been remote started and is equipped with anIKT, you must turn the ignition on before driving the vehicle. If equippedwith an

Page 61

SECURICODE™ KEYLESS ENTRY SYSTEM (IF EQUIPPED)You can use the keyless entrykeypad to:• lock or unlock the doors withoutusing a key.• recall memory sea

Page 62

Tips:• Do not set a code that uses five of the same number.• Do not use five numbers in sequential order.• The factory set code will work even if you

Page 63

SECURILOCK姞 PASSIVE ANTI-THEFT SYSTEMSecuriLock威 passive anti-theft system is an engine immobilizationsystem. This system is designed to help prevent

Page 64 - Climate Controls

Replacement of integrated keyhead transmitters (IKT) or intelligentaccess keysNote: Your vehicle comes equipped with two integrated keyheadtransmitter

Page 65

• If two previously programmed coded keys are not available, you musttake your vehicle to your authorized dealer to have the spare key(s)programmed.Pl

Page 66

Programming spare intelligent access keys (if equipped)If you have integrated keyhead transmitters (IKT) or standardSecuriLock威 coded keys, refer to P

Page 67

8. Verify that the remote entry functions operate (press lock thenunlock, making sure you end in unlock) and that the vehicle starts withnew intellige

Page 68

Many lights will illuminate when you start your vehicle to make sure theindicators work. If any light remains on after starting the vehicle, refer tot

Page 69

After locking the doors using any of the methods above, the turn signallamps will flash once indicating that the perimeter alarm is in thepre-armed mo

Page 70

FRONT SEATSWARNING: Reclining the seatback can cause an occupant toslide under the seat’s safety belt, resulting in severe personalinjuries in the eve

Page 71

To adjust the head restraint, do the following:1. Adjust the seatback to an upright driving/riding position.2. Raise the head restraint by pulling up

Page 72

2. Pivot the head restraint forwardtowards your head to the desiredlocation.After the head restraint reachesthe forward-most tilt position,pivoting it

Page 73

WARNING: Before returning the seatback to its originalposition, make sure that cargo or any objects are not trappedbehind the seatback. After returnin

Page 74

WARNING: To reduce the risk of possible serious injury: Do nothang objects off seat back or stow objects in the seatback mappocket (if equipped) when

Page 75

Using the power lumbar support (if equipped)The power lumbar control is located on the outboard side of the seat.Press the forward side of the control

Page 76

Three-position heated and cooled seats (if equipped)Heated seatsThe heated seats will only function when the engine is running.WARNING: Persons who ar

Page 77

Note: When the heated/cooled front seat is active, you will be able tohear the fan operating inside the seat. This is normal.Climate controlled seats

Page 78

To install a filter:1. First, position the filter in itshousing making sure that the farforward end is all the way up in thehousing.2. Push in on the

Page 79

Brake system warning light: Toconfirm the brake system warninglight is functional, it willmomentarily illuminate when theignition is turned to the on

Page 80

The memory positions are also recalled when you press your remoteentry transmitter(unlock) control (if the transmitter is programmedto a memory positi

Page 81

REAR SEATSSecond row head restraintsYour vehicle may be equipped with two types of second row headrestraints:• Outboard seat head restraints– The outb

Page 82

Adjusting second row bucket and bench seat backLift the handle to adjust seatback.Using same control will fold theseatback flat.Note: For the bench se

Page 83

2. Fold the head outboard restraintby pulling the head restraint releasestrap.Note: Outboard head restraints donot adjust vertically.3. Lift the handl

Page 84

5. To return the seatback to thefloor from tumbled position, rotatethe seat down until you hear itlatching to the floor.6. To return the seatback to t

Page 85

2nd row power fold and tumble seat (six–passenger vehicles only)WARNING: Ensure that the seat is unoccupied when folding itdown. Folding the seat whil

Page 86

3. To return the seatback to thefloor from tumbled position, rotatethe seat down until you hear itlatching to the floor.4. To return the seatback to t

Page 87

WARNING: Do not adjust or release the seat floor latch whilevehicle is in motion. Do not operate the vehicle with seats intumbled position. Always lat

Page 88

Note: Do not use the seat anchors as cargo tie downs.Note: Do not use the third rowseatback as a load floor when theseatback is folded.Note: Ensure th

Page 89

2. To return the seatback to uprightposition, pull the number 1 strap,then while holding the number 1strap, pull the long strap located onthe seatback

Page 90

Charging system (RTT):Illuminates when the battery is notcharging properly. If it stays onwhile the engine is running, theremay be a malfunction with

Page 91

PowerFold姞 third-row seat (if equipped)The third row seat features a power one-touch operation that allows youto adjust the Left, Right, or Both seats

Page 92

Note: In order to allow the seat to complete the stowed position, do notplace objects under the seat before stowing. Remove all objects from theseat a

Page 93

• Passenger airbag off/on indicator lamp• Front crash severity sensors.• Restraints Control Module (RCM) with impact and safing sensors.• Restraint sy

Page 94

Driver’s seat position sensorThe driver’s seat position sensor allows your Personal Safety System totailor the deployment level of the driver dual-sta

Page 95

Front safety belt pretensionersThe safety belt pretensioners at the front outboard seating positions aredesigned to tighten the safety belts firmly ag

Page 96

SAFETY BELT SYSTEMSafety belt precautionsWARNING: Always drive and ride with your seatback uprightand the lap belt snug and low across the hips.WARNIN

Page 97

WARNING: Front and rear seat occupants, including pregnantwomen, should wear safety belts for optimum protection in anaccident.Combination lap and sho

Page 98

Restraint of pregnant womenWARNING: Always ride and drive with your seatback uprightand the safety belt properly fastened. The lap portion of thesafet

Page 99

Automatic locking modeIn this mode, the shoulder belt or lap belt is automatically pre-locked.The belt will still retract to remove any slack in the s

Page 100 - Driver Controls

How to disengage the automatic locking modeWARNING: After any vehicle collision, the safety belt system atall passenger seating positions must be chec

Page 101

Engine coolant temperature:Illuminates when the engine coolanttemperature is high. Stop thevehicle as soon as possible, switch off the engine and let

Page 102

Rear Inflatable Safety Belt (if equipped)The rear inflatable safety belts arefitted in the shoulder safety belts ofthe second-row outboard seatingposi

Page 103

How does the rear inflatable safety belt system work?• The rear inflatable safety beltswill function like standardrestraints in everyday usage.• Durin

Page 104

WARNING: If the rear inflatable safety belt has deployed, itwill not function again. The rear inflatable safety beltsystem must be inspected and servi

Page 105

WARNING: Do not use extensions with an inflatable safety belt.WARNING: Do not use extensions to change the fit of theshoulder belt across the torso.Sa

Page 106

Belt-Minder姞The Belt-Minder威 feature is a supplemental warning to the safety beltwarning function. This feature provides additional reminders byinterm

Page 107

If... Then...The driver’s or front passenger’ssafety belt becomes unbuckledfor approximately one minutewhile the vehicle is traveling atleast 3 mph (5

Page 108

Reasons given... Consider...“Belts wrinkle my clothes” Possibly, but a serious crash can domuch more than wrinkle your clothes,particularly if you are

Page 109

The driver and front passenger Belt-Minder威 features can bedeactivated/activated by performing the following procedure:Before following the procedure,

Page 110

AIRBAG SUPPLEMENTAL RESTRAINT SYSTEM (SRS)The airbag supplemental restraint system (SRS) is designed to work inconjunction with the safety belts to he

Page 111

WARNING: Do not place any object between an occupant andan airbag or near any other airbag covering. The airbag may notinflate properly and might forc

Page 112

Introduction 4Instrument Cluster 14Warning lights and chimes 14Gauges 21Message center 23Entertainment Systems 51MyFord™ system 51Auxiliary input jack

Page 113

Low washer fluid (RTT):Illuminates when the windshieldwasher fluid is low.Turn signal: Illuminates when theleft or right turn signal or thehazard ligh

Page 114

WARNING: Modifying or adding equipment to the front end ofthe vehicle (including frame, bumper, front end body structureand tow hooks) may affect the

Page 115

The airbags inflate and deflaterapidly upon activation. After airbagdeployment, it is normal to notice asmoke-like, powdery residue orsmell the burnt

Page 116

• a readiness light and tone.• diagnostic module.• the electrical wiring which connects the components.• Front passenger sensing system. Refer to Fron

Page 117

Passenger airbag status indicatorThe front passenger sensing systemuses a passenger airbag statusindicator which will illuminateindicating that the fr

Page 118

• If the passenger airbag status indicator OFF lamp remains lit evenafter this, the person should be advised to ride in the rear seat.OccupantPassenge

Page 119

• Objects stowed in the seatback map pocket (if equipped)• Objects placed on the occupant’s lap• Cargo interference with the seat• Other passengers pu

Page 120

• Wait at least two minutes and verify that the airbag readiness light inthe instrument cluster is no longer illuminated• If the airbag readiness ligh

Page 121

Seat-mounted side airbag systemWARNING: Do not place objects or mount equipment on ornear the airbag cover on the side of the seatbacks of the frontse

Page 122

The side airbag system consists ofthe following:• An inflatable bag (airbag) with agas generator concealed behindthe outboard bolster of the driverand

Page 123

WARNING: If the sideairbag has deployed, theairbag will not function again.The side airbag system(including the seat) must beinspected and serviced by

Page 124

Terrain management (ifequipped): Illuminates when aterrain management mode isselected. See Terrain managementin the Driving chapter for moreinformatio

Page 125

How does the Safety Canopy姞 System work?The design and development of theSafety Canopy system includedrecommended testing proceduresthat were develope

Page 126

The Safety Canopy is mounted to roof side-rail sheet metal, behind theheadliner, above each row of seats. In certain lateral collisions or rollovereve

Page 127

• A series of five beeps will be heard. The tone pattern will repeatperiodically until the problem and light are repaired.If any of these things happe

Page 128

WARNING: All children are shaped differently. TheRecommendations for Safety Restraints are based on probablechild height, age and weight thresholds fr

Page 129

Recommendations for Safety Restraints for ChildrenChild size, height, weight, orageRecommendedrestraint typeLargerchildrenChildren who have outgrown o

Page 130

Recommendations for attaching child safety restraints for childrenRestraintTypeChildWeightUse any attachment method as indicatedbelow by “X”LATCH(lowe

Page 131 - Locks and Security

WARNING: Never let a passenger hold a child on his or her lapwhile the vehicle is moving. The passenger cannot protect thechild from injury in a colli

Page 132

Follow all the safety restraint and airbag precautions that apply to adultpassengers in your vehicle.If the child is the proper height, age, and weigh

Page 133

Installing child safety seats with combination lap and shoulderbeltsCheck to make sure the child seat is properly secured before each use.Children 12

Page 134

Perform the following steps when installing the child seat withcombination lap/shoulder belts:Note: Although the child seat illustrated is a forward f

Page 135

GAUGESBase clusterShown in standard measure. Metric similar.1. Tachometer: Indicates the engine speed in revolutions per minute.Driving with your tach

Page 136

3. While holding the shoulder andlap belt portions together, route thetongue through the child seataccording to the child seatmanufacturer’s instructi

Page 137

5. To put the retractor in the automatic locking mode, do the following:• Standard safety belt: grasp theshoulder portion of the belt andpull downward

Page 138

• Standard safety belt• Inflatable safety belt9. Attach the tether strap (if the child seat is equipped). Refer toAttaching child safety seats with te

Page 139

Attaching child safety seats with LATCH (Lower Anchors andTethers for CHildren) attachmentsThe LATCH system is composed of three vehicle anchor points

Page 140

The LATCH anchors for child seatinstallation are located at the rearsection of the rear seat between thecushion and seat back, below thelocator symbol

Page 141

WARNING: The standardized spacing for LATCH lower anchorsis 280 mm (11 inches) center to center. Do not use LATCHlower anchors for the center seating

Page 142

The tether strap anchors in your vehicle are in the following positions(shown from top view):• Second row bucket seats• Second row bench seatsAttach t

Page 143

Perform the following steps to attach a child safety seat to the tetheranchor:Second row seating positions1. Route the child safety seat tetherstrap o

Page 144

Third row seating positionFor the third row seating position,route the child safety seat tetherstrap over the seatback, under thehead restraint, and b

Page 145

Although the lap/shoulder belt will provide some protection, childrenwho have outgrown a typical child seat are still too small for lap/shoulderbelts

Page 146

• Engine coolant temperaturegauge (if enabled): Indicatesengine coolant temperature. Atnormal operating temperature,the level indicator will be in the

Page 147

Types of booster seatsThere are generally two types of belt-positioning booster seats: backlessand high back. Always use booster seats in conjunction

Page 148

Children and booster seats vary in size and shape. Choose a booster thatkeeps the lap belt low and snug across the hips, never up across thestomach, a

Page 149

Follow all instructions provided by the manufacturer of the booster seat.WARNING: Never place, or allow a child to place, the shoulderbelt under a chi

Page 150

NOTICE TO UTILITY VEHICLE AND TRUCK OWNERSUtility vehicles and trucks handledifferently than passenger cars inthe various driving conditions thatare e

Page 151

VEHICLE CHARACTERISTICSFour-wheel drive (4WD) system (if equipped)A vehicle equipped with 4WD (when selected) has the ability to use allfour wheels to

Page 152

How your vehicle differs from other vehiclesSUVs and trucks can differ fromsome other vehicles in a fewnoticeable ways. Your vehicle maybe:• Higher –

Page 153

INFORMATION ABOUT UNIFORM TIRE QUALITY GRADINGTire Quality Grades apply to newpneumatic passenger car tires. TheQuality grades can be found whereappli

Page 154

WARNING: The traction grade assigned to this tire is based onstraight-ahead braking traction tests, and does not includeacceleration, cornering, hydro

Page 155

• Extra load: A class of P-metric or Metric tires designed to carry aheavier maximum load at 41 psi [43 psi (2.9 bar) for Metric tires].Increasing the

Page 156

WARNING: Under-inflation is the most common cause of tirefailures and may result in severe tire cracking, tread separationor “blowout”, with unexpecte

Page 157

Optional clusterShown in standard measure. Metric similar.1. Multifunction display: This displays the fuel gauge, tachometer,engine coolant temperatur

Page 158

Note: If you have to drive a distance to get air for your tire(s), checkand record the tire pressure first and add the appropriate air pressurewhen yo

Page 159

Improper or inadequate vehicle maintenance can cause tires to wearabnormally. Inspect all your tires, including the spare, frequently, andreplace them

Page 160

U.S. DOT Tire Identification Number (TIN)Both U.S. and Canada Federal regulations require tire manufacturers toplace standardized information on the s

Page 161 - Seating and Safety Restraints

WARNING: When mounting replacement tires and wheels, youshould not exceed the maximum pressure indicated on thesidewall of the tire to set the beads w

Page 162

Safety practicesDriving habits have a great deal to do with your tire mileage and safety.• Observe posted speed limits• Avoid fast starts, stops and t

Page 163

The tires should also be balanced periodically. An unbalanced tire andwheel assembly may result in irregular tire wear.Tire rotationRotating your tire

Page 164

Information on “P” type tiresP215/65R15 95H is an example of atire size, load index and speedrating. The definitions of theseitems are listed below. (

Page 165

Note: You may not find this information on all tires because it is notrequired by federal law.Letter rating Speed rating - mph (km/h)M 81 mph (130 km/

Page 166

11. Maximum Load: Indicates the maximum load in kilograms andpounds that can be carried by the tire. Refer to the Safety ComplianceCertification Label

Page 167

Additional information contained on the tire sidewall for “LT” typetires“LT” type tires have some additionalinformation beyond those of “P”type tires;

Page 168

The message center is also used to program/configure the differentfeatures of your vehicle. The message center display is located in theinstrument clu

Page 169

Information on “T” type tires“T” type tires have some additionalinformation beyond those of “P”type tires; these differences aredescribed below:T145/8

Page 170

TIRE PRESSURE MONITORING SYSTEM (TPMS)Each tire, including the spare (ifprovided), should be checkedmonthly when cold and inflated tothe inflation pre

Page 171

following two conditions: (1) This device may not cause harmfulinterference, and (2) This device must accept any interference received,including inter

Page 172

To restore the full functionality of the tire pressure monitoring system,have the damaged road wheel/tire repaired and remounted on yourvehicle. For a

Page 173

Low tire pressurewarning lightPossiblecauseCustomer action requiredFlashing warninglightSpare tire inuseYour temporary spare tire is in use.Repair the

Page 174

SNOW TIRES AND CABLESWARNING: Snow tires must be the same size, load index, speedrating as those originally provided by Ford. Use of any tire orwheel

Page 175

VEHICLE LOADING – WITH AND WITHOUT A TRAILERThis section will guide you in the proper loading of your vehicle and/ortrailer, to keep your loaded vehic

Page 176

WARNING: The appropriate loading capacity of your vehicle canbe limited either by volume capacity (how much space isavailable) or by payload capacity

Page 177

Cargo Weight – includes all weight added to the Base Curb Weight,including cargo and optional equipment. When towing, trailer tongue loador king pin w

Page 178

• Example only:WARNING: Exceeding the Safety Compliance Certification Labelvehicle weight rating limits could result in substandard vehiclehandling or

Page 179

Scroll up/down to highlight one of the options, then press the right arrowkey or OK to enter into that menu option.Information4WD Gauge (if equipped)M

Page 180

GCW (Gross Combined Weight) – is the weight of the loaded vehicle(GVW) plus the weight of the fully loaded trailer.GCWR (Gross Combined Weight Rating)

Page 181

WARNING: Exceeding any vehicle weight rating limitation couldresult in serious damage to the vehicle and/or personal injury.Steps for determining the

Page 182

• A final example for your vehicle with 1,400 lb. (635 kg) of cargo andluggage capacity. You and one of your friends decide to pick upcement from the

Page 183

TRAILER TOWINGTrailer towing with your vehicle may require the use of a trailer towoption package. An optional Class III towing hitch is available and

Page 184

Engine/Passengers/Trailer Class MaximumGCWR - lb(kg)MaximumTrailer Weight- lb (kg)FWD vehicles3.5L/6–passenger/Class I 6870 (3116) 2000 (907)3.5L/7–pa

Page 185

Trailer brakesElectric brakes and manual, automatic or surge-type trailer brakes aresafe if installed properly and adjusted to the manufacturer’sspeci

Page 186

Trailer towing tips• Practice turning, stopping and backing-up before starting on a trip toget the feel of the vehicle-trailer combination. When turni

Page 187

If you tow your vehicle with all four wheels on the ground:• Tow only in the forward direction.• Release the parking brake.• Place the transmission sh

Page 188

STARTINGPositions of the ignition (if equipped)If your vehicle is equipped with a push button start system, refer toPush button start system in this s

Page 189

WARNING: Do not start your vehicle in a closed garage or inother enclosed areas. Exhaust fumes can be toxic. Always openthe garage door before you sta

Page 190

Settings (cont’d)Convenience(cont’d)Easy Entry/ExitLocks Autolock orAutounlockOn or OffRemote Unlock All Doors orDriver FirstOil life Reset Set 10-100

Page 191

• Make sure the gearshift is in P(Park).3. Turn the key to 3 (on) withoutturning the key to 4 (start).If your vehicle is equipped with a push button s

Page 192

Note: Cranking may be stopped at any time by turning the key to the offposition.3. After idling for a few seconds, release the parking brake, apply th

Page 193

3. On — press and hold the START/STOP button for at least one secondwithout applying the brake pedal. This will power your vehicle’s electricalsystem

Page 194

Switching the vehicle off when not in P (Park): It is recommendedthat you shift into the P (Park) position before switching your vehicleoff. If you sw

Page 195

ENGINE BLOCK HEATER (IF EQUIPPED)An engine block heater warms the engine coolant which aids in startingand allows the heater/defroster system to respo

Page 196

• Be sure that areas where the vehicle is parked are clean and clear ofall combustibles such as petroleum products, dust, rags, paper andsimilar items

Page 197

brake pedal may suddenly travel a little farther as soon as ABS braking isdone and normal brake operation resumes. These are normalcharacteristics of

Page 198

the parking brake, and then inspect the accelerator pedal for anyinterferences. If none are found and the condition persists, have yourvehicle towed t

Page 199

ADVANCETRAC姞 WITH ROLL STABILITY CONTROL™ (RSC姞)STABILITY ENHANCEMENT SYSTEMThe AdvanceTrac威 with RSC威 system provides the following stabilityenhancem

Page 200

WARNING: If a failure has been detected within theAdvanceTrac威 with RSC威 system, the stability control light andstability control off light will illum

Page 201

Settings (cont’d)MyKey Create MyKey™ Hold OK to Create MyKeyTraction Control Always On or User SelectableMax Speed 80 MPH (130 km/h) or OffSpeed Warni

Page 202

Traction control system (TCS)The traction control system is a driver aid feature that helps your vehiclemaintain traction of the wheels, typically whe

Page 203

• Entering a snow-free road from a snow-covered side street, or viceversa• Entering a paved road from a gravel road, or vice versa• Cornering while to

Page 204

Turning traction control offIf the vehicle is stuck in snow, mud or sand, and seems to lose enginepower, switching off traction control in the Advance

Page 205

Trailer sway controlWhen properly equipped, trailer sway control will use the vehicle’sAdvanceTrac威 with RSC威 system to detect and help reduce trailer

Page 206

HILL DESCENT CONTROL™ (IF EQUIPPED)Hill descent control allows the driver to set and maintain vehicle speedwhile descending steep grades in various su

Page 207

Note: Noise from the ABS pump motor may be observed during hilldescent control operation. This is a normal characteristic of the ABS andshould be no r

Page 208

WARNING: The EPS system has diagnostics checks thatcontinuously monitor the EPS system to ensure proper operationof the electronic system. When an ele

Page 209

PREPARING TO DRIVEWARNING: Utility vehicles have a significantly higher rolloverrate than other types of vehicles.WARNING: In a rollover crash, an unb

Page 210

BRAKE-SHIFT INTERLOCKThis vehicle is equipped with a brake-shift interlock (BSI) feature thatprevents the gearshift lever from being moved from P (Par

Page 211

WARNING: Do not drive your vehicle until you verify that thebrakelamps are working.WARNING: Always set the parking brake fully and make surethe gearsh

Page 212

Types of messages and warnings:• Some messages will appear briefly to inform you of something youmay need to take action on or be informed of.• Some m

Page 213

P (Park)This position locks the transmissionand prevents the front wheels fromturning.To put your vehicle in gear:• Press the brake pedal• Move the ge

Page 214

The tow feature delays upshifts to reduce frequency of transmissionshifting. Tow also provides engine braking in all forward gears when thetransmissio

Page 215

• The grade assist lamp in theinstrument cluster is illuminated.Grade assist is designed to aid thedriver with optimal gear selection inhilly terrain

Page 216

Recommended shift speedsUpshift according to the following chart:Upshifts when accelerating(recommended for best fuel economy)Shift from:1 - 2 15 mph

Page 217

Using hill start assistThe hill start assist feature is activated automatically when the vehicle isstopped on a slope greater than five degrees. The h

Page 218

REVERSE SENSING SYSTEM (IF EQUIPPED)The reverse sensing system (RSS) sounds a tone to warn the driver ofobstacles near the rear bumper when the R (Rev

Page 219

The RSS detects obstacles up to sixfeet (two meters) from the rearbumper with a decreased coveragearea at the outer corners of thebumper, (refer to th

Page 220

REARVIEW CAMERA SYSTEM (IF EQUIPPED)The rear video camera system,located on the liftgate above thelicense plate, provides a video imageof the area beh

Page 221

To use active guidelines, turn the steering wheel and point the activeguidelines towards an intended path. If the steering wheel position ischanged wh

Page 222

When enabled, Level 1, Level 2, or Level 3 will only be active while thevehicle is in R (Reverse). The feature disables outside of R (Reverse)and must

Page 223

Seating and Safety Restraints 160Seating 160Personal Safety System™ 180Safety belt system 184Airbags 197Child restraints 211Tires, Wheels and Loading

Page 224

SERVICE ADVANCETRAC — Displayed when the AdvanceTrac威system has detected a condition that requires service. Contact yourauthorized dealer as soon as p

Page 225

After activating or deactivating a rear video camera feature, thetouchscreen will show a preview of the feature(s) selected.Note: If the camera system

Page 226

Night time and dark area useAt night time or in dark areas, the camera system relies on the reverselamp lighting to produce an image. Therefore, it is

Page 227

OperationThe radar sensor detects vehiclesahead that are moving in the samedirection as your vehicle.If the radar detects that yourvehicle is rapidly

Page 228

WARNING: The collision warning system’s brake support canonly help reduce the speed at which a collision occurs if thedriver applies the vehicle’s bra

Page 229

Activating/deactivating collision warning systemTo turn the warning system and/or chime on or off and set the warningsensitivity <– –>, refer to

Page 230

Automatic search for parking spaceTo start, press the APA controlswitch(ontheleftsideoftheinstrument panel below theheadlamp switch). The touch screen

Page 231

Automatic steering into parking spaceAutomatic steering is activated when you stop the vehicle, remove yourhands from the steering wheel and select th

Page 232

The system may offer subsequent backward and forward maneuversbefore proceeding to the finish phase.APA finishedWhen active park assist has completed

Page 233 - Tires, Wheels and Loading

The system should not be used if:• a foreign object (i.e. bike rack, trailer, etc.) is attached to the front orrear of the vehicle or at another locat

Page 234

• The vehicles or objects bordering the space may not be positionedappropriately.• The vehicle was pulled further up from the parking space than usual

Page 235

REMOVE OBJECTS NEAR PASS SEAT — Displayed when objectsare by the passenger seat. After the objects are moved away from theseat, if the warning stays o

Page 236

BLIND SPOT MIRRORS (IF EQUIPPED)Blind spot mirrors have an integrated convex spotter mirror built intothe upper outboard corner of the outside mirrors

Page 237

BLIND SPOT INFORMATION SYSTEM (BLIS姞) WITH CROSSTRAFFIC ALERT (CTA) (IF EQUIPPED)The BLIS威 is a convenience featurethat aids the driver in assessingwh

Page 238

The BLIS威 will trigger the alert for vehicles that enter your blind zonefrom the rear or merge in to the blind zone from the side. Vehicles thatyou pa

Page 239

Cross traffic alert (CTA) system operationThe CTA system warns the driver of approaching vehicles when R(Reverse) is selected and the vehicle is backi

Page 240

CTA coverage also decreases when parking at shallow angles (refer tofigure for approximate zone coverage areas [sensor obstructed forvehicle on left])

Page 241

CTA and reverse sensing system (RSS) interactionCTA works along with the reverse sensing system (RSS) (if equipped).Become familiar with the warning t

Page 242

WARNING: Just prior to the system recognizing a blockedcondition and alerting the driver, the number of missed objectswill increase. To help avoid inj

Page 243

FOUR WHEEL DRIVE (4WD) SYSTEM (IF EQUIPPED)WARNING: For important information regarding safe operationof this type of vehicle, see Preparing to drive

Page 244

Basic operating principles• Drive slower in strong crosswinds which can affect the normal steeringcharacteristics of your vehicle.• Be extremely caref

Page 245

WARNING: Always set the parking brake fully and make surethe gearshift is latched in P (Park). Turn the ignition to the offposition and remove the key

Page 246

MAX NUMBER OF KEYS PROGRAMMED — Displayed during spare keyprogramming when the maximum number of keys have been programmed.MYKEY ACTIVE DRIVE SAFELY —

Page 247

SandWhen driving over sand, try to keep all four wheels on the most solidarea of the trail. Avoid reducing the tire pressures but shift to a lowergear

Page 248

“Tread Lightly” is an educationalprogram designed to increase publicawareness of land-use regulationsand responsibilities in our nationswilderness are

Page 249

Descend a hill in the same gear youwould use to climb up the hill toavoid excessive brake applicationand brake overheating. Do notdescend in neutral;

Page 250

WARNING: If you are driving in slippery conditions that requiretire chains or cables, then it is critical that you drive cautiously.Keep speeds down,

Page 251

1. Grass/Gravel/Snow2. Sand3. Mud/Ruts4. Normal• Normal - This mode is for on-road conditions. If not already active,Normal should be selected before

Page 252

TERRAIN MANAGEMENT SYSTEM FAULT: If this message isdisplayed, cycling the key may clear the fault. If the fault is not clearedafter a key cycle, have

Page 253

ROADSIDE ASSISTANCEGetting roadside assistanceTo fully assist you should you have a vehicle concern, Ford MotorCompany offers a complimentary roadside

Page 254

Canadian customers refer to your Warranty Guide or visit ourwebsite at www.ford.ca for information on:Using roadside assistanceComplete the roadside a

Page 255

FUEL PUMP SHUT-OFFIn the event of a moderate to severe collision, this vehicle is equippedwith a fuel pump shut-off feature that stops the flow of fue

Page 256

Standard fuse amperage rating and colorCOLORFuseratingMini fusesStandardfusesMaxi fusesCartridgemaxi fuses2A Grey Grey — —3A Violet Violet — —4A Pink

Page 257

BLIND SPOT NOT AVAILABLE SENSOR BLOCKED (if equipped)— Displayed when the blind spot information system/cross traffic alertsystem sensors are blocked.

Page 258

The fuses are coded as follows:Fuse/RelayLocationFuse AmpRatingProtected Circuits1 30A One touch up/down driver side frontwindow2 15A Not used (spare)

Page 259

Fuse/RelayLocationFuse AmpRatingProtected Circuits10 10A Run/accessory relay (wipers, rearwasher), Rain sensor11 10A Instrument cluster, Heads-up disp

Page 260

Fuse/RelayLocationFuse AmpRatingProtected Circuits30 15A Front park lamps31 5A Trailer tow brake controller32 15A 110V AC power point, Power foldingmi

Page 261

Power distribution boxThe power distribution box is located in the engine compartment. Thepower distribution box contains high-current fuses that prot

Page 262

Fuse/RelayLocationFuse AmpRatingPower Distribution Box Description6 — Not used7 30A** Power liftgate8 20A** Moon roof9 20A** Power point #2 (console r

Page 263

Fuse/RelayLocationFuse AmpRatingPower Distribution Box Description37 — TT right stop/turn lamps relay38 — TT back up relay39 40A** Auxiliary blower mo

Page 264

Fuse/RelayLocationFuse AmpRatingPower Distribution Box Description67 20A* Vehicle power (VPWR) #2 (emissionrelated powertrain components)68 15A* VPWR

Page 265

Fuse/RelayLocationFuse AmpRatingPower Distribution Box Description94 30A** Passenger compartment fuse panelrun/start95 — Not used96 — Not used97 — Not

Page 266

Dissimilar spare tire/wheel informationWARNING: Failure to follow these guidelines could result in anincreased risk of loss of vehicle control, injury

Page 267

3. Full-size dissimilar spare without label on wheelWhen driving with the full-size dissimilar spare tire/wheel, do not:• Exceed 70 mph (113 km/h)• Us

Page 268 - 2011 Explorer (exp)

HILL DESCENT CONTROL ACTIVE (if equipped) — Displayedwhen hill descent control mode becomes active.HILL DESCENT CONTROL FAULT (if equipped) — Displaye

Page 269

Stopping and securing the vehicle1. Park on a level surface, set theparking brake and activate hazardflashers.2. Place gearshift lever in P (Park)and

Page 270

4. Remove the wing bolt thatsecures the jack kit by turning itcounterclockwise.5. Remove the jack kit whichincludes jack (4), wheel wrench (lugwrench)

Page 271

Tire change procedureWARNING: When one of the front wheels is off the ground, thetransaxle alone will not prevent the vehicle from moving orslipping o

Page 272

3. Put the jack in the jack notchnext to the tire you are changing.Turn the jack handle clockwise untilthe wheel is completely off theground.4. Remove

Page 273

Push the button (1) to retract thewrench handle and place thewrench over the raised tab on thelower link and drop the tang (2)through the hole in the

Page 274

TEMPORARY MOBILITY KIT (IF EQUIPPED)Your vehicle may be equipped with atemporary mobility kit (locatedunder the driver’s seat). To removethe temporary

Page 275

1. Air compressor (inside)2. Diverter knob3. On/Off button4. Air pressure gauge5. Deflation button6. Sealant bottle/canister7. Sealant filling clear t

Page 276

Tips for use of the temporary mobility kitRead the following list of tips to ensure safe operation of the temporarymobility kit:• Before operating the

Page 277

What to do when a tire is puncturedA tire puncture within the tire’s tread area can be repaired in two stageswith the temporary mobility kit:• In the

Page 278

7. Turn dial (1) counterclockwise tothe sealant position. Turn on the kitby pressing the on/off button (2).8. Inflate the tire to the pressurelisted o

Page 279

OPTIONAL MESSAGE CENTER (IF EQUIPPED)Your vehicle’s message center is capable of monitoring many vehiclesystems and will alert you to potential vehicl

Page 280

10. Immediately and cautiously, drive the vehicle 4 miles (6 km)to distribute the sealant evenly inside the tire. Do not exceed50 mph (80 km/h).Note:

Page 281

5. Turn the compressor off by pressing the on/off button.6. Unplug the hoses, re-install the valve cap on the tire and return thekit to the stowage ar

Page 282

2. Press the button located on thetemporary mobility kit compressorhousing below the canister whilepulling up on the sealant canister.Installation of

Page 283

3. Wrap the clear tube around thecompressor housing.Note: If you experience any difficulties with the removal or installationof the sealant canister,

Page 284

WARNING: When a wheel is installed, always remove anycorrosion, dirt or foreign materials present on the mountingsurfaces of the wheel or the surface

Page 285

JUMP STARTINGWARNING: The gases around the battery can explode ifexposed to flames, sparks, or lit cigarettes. An explosion couldresult in injury or v

Page 286

Connecting the jumper cablesNote: In the illustration, the vehicle on the bottom is used to designatethe assisting (boosting) battery.1. Connect the p

Page 287

Jump starting1. Start the engine of the booster vehicle and run the engine atmoderately increased speed.2. Start the engine of the disabled vehicle.3.

Page 288

WRECKER TOWINGIf you need to have your vehicle towed, contact a professional towingservice or, if you are a member of a roadside assistance program, y

Page 289

If the vehicle is towed by other means or incorrectly, vehicledamage may occur.Ford Motor Company produces a towing manual for all authorized towtruck

Page 290

Menu Control: You can choose adifferent menu control operation tosuite your needs. In any screenwhich shows these category icons(other than the Main m

Page 291

GETTING THE SERVICES YOU NEEDWarranty repairs to your vehicle must be performed by an authorizeddealer. While any authorized dealer handling your vehi

Page 292

In Canada:Mailing address (Ford vehicles)Customer Relationship CentreFord Motor Company of Canada, LimitedP.O. Box 2000Oakville, Ontario L6J 5E4Teleph

Page 293

In the United States, a warranty dispute must be submitted to the BBBAUTO LINE before taking action under the Magnuson-Moss WarrantyAct, or to the ext

Page 294

You are required to submit your warranty dispute to BBB AUTO LINEbefore asserting in court any rights or remedies conferred by CaliforniaCivil Code Se

Page 295

You can get more information by calling BBB AUTO LINE at1-800-955-5100, or writing to:BBB AUTO LINE4200 Wilson Boulevard, Suite 800Arlington, Virginia

Page 296

The use of leaded fuel in your vehicle without proper conversion maydamage the effectiveness of your emission control system and may causeengine knock

Page 297

If your vehicle must be serviced while you are traveling or living in theMiddle East, contact the nearest authorized dealer. If the authorizeddealer c

Page 298

REPORTING SAFETY DEFECTS (U.S. ONLY)If you believe that your vehicle hasa defect which could cause a crashor could cause injury or death, youshould im

Page 299

WASHING THE EXTERIORWash your vehicle regularly with cool or lukewarm water and a neutralpH shampoo, such as Motorcraft威 Detail Wash (ZC-3-A), which i

Page 300

WAXING• Wash the vehicle first.• Use a quality wax that does not contain abrasives.• Do not allow paint sealant to come in contact with any non-body(l

Page 301

• Fuel gauge: Indicates approximately how much fuel is left in the fueltank. The fuel gauge may vary slightly when the vehicle is in motionor on a gra

Page 302

ENGINEEngines are more efficient when they are clean because grease and dirtbuildup keep the engine warmer than normal. When washing:• Take care when

Page 303

WINDOWS AND WIPER BLADESThe windshield, rear and side windows and the wiper blades should becleaned regularly. If the wipers do not wipe properly, sub

Page 304

• Be certain to wash or wipe your hands clean if you have been incontact with certain products such as insect repellent and suntanlotion in order to a

Page 305

• If a ring forms on the fabric after spot cleaning, clean the entire areaimmediately (but do not oversaturate) or the ring will set.• Do not use hous

Page 306

LEATHER SEATS FOR THE KING RANCH姞 EDITION ONLY(IF EQUIPPED)Your vehicle is equipped with seating covered in premium, top-grainleather which is extreme

Page 307

UNDERBODYFlush the complete underside of your vehicle frequently. Keep body anddoor drain holes free from packed dirt.FORD AND LINCOLN CAR CARE PRODUC

Page 308

SERVICE RECOMMENDATIONS• Use the scheduled maintenance information to track routineservice.• Use only recommended fuels, lubricants, fluids and servic

Page 309

OPENING THE HOOD1. Inside the vehicle, pull the hoodrelease handle located under thebottom left corner of the instrumentpanel.2. Go to the front of th

Page 310

IDENTIFYING COMPONENTS IN THE ENGINE COMPARTMENT3.5L V6 engine1. Engine coolant reservoir2. Brake fluid reservoir3. Battery4. Power distribution box5.

Page 311

WINDSHIELD WASHER FLUIDAdd fluid to fill the reservoir if thelevel is low. In very cold weather, donot fill the reservoir completely.Only use a washer

Page 312

Intelligent Four-wheel drive(4WD) (if equipped) + othergaugesFor a description of the othergauges, see the descriptions listedpreviously.• Intelligent

Page 313

CHANGING THE WIPER BLADES1. Pull the wiper blade and armaway from the glass.2. Squeeze the locking tabs torelease the blade from the arm andpull the b

Page 314

3. To attach the new wiper to thewiper arm, align the slot (1) andcross pin (2) and firmly press thewiper arm into the wiper blade untila click is hea

Page 315

Adding engine oil1. Check the engine oil. For instructions, refer to Checking the engineoil in this chapter.2. If the engine oil level is not within t

Page 316

Do not use supplemental engine oil additives, cleaners or other enginetreatments. They are unnecessary and could lead to engine damage thatis not cove

Page 317

WARNING: Batteries normally produce explosive gases whichcan cause personal injury. Therefore, do not allow flames, sparksor lighted substances to com

Page 318

• If you do not allow the engine to relearn its idle trim, the idlequality of your vehicle may be adversely affected until the idletrim is eventually

Page 319

Note: Electrical or electronic accessories added to the vehicle mayadversely affect battery performance and durability and may also affectthe performa

Page 320

If the engine coolant has not been checked at the recommended interval,the engine coolant reservoir may become low or empty. If the reservoir islow or

Page 321

• Do not add extra inhibitors or additives to the coolant. Thesecan be harmful and compromise the corrosion protection of the enginecoolant.For vehicl

Page 322

If you have to add more than 1.0 quart (1.0 liter) of engine coolant permonth, have your authorized dealer check the engine cooling system.Your coolin

Page 323

Enhanced trip display• Trip distance — shows the accumulated trip distance• Average fuel economy — shows the average fuel economy for a giventrip.• Es

Page 324

• If available, refer to the chart on the coolant container toensure the coolant concentration in your vehicle will provideadequate protection at the

Page 325

2. Leave the engine running until the coolant temperature gauge needlemoves away from the H range. After several minutes, if this does nothappen, foll

Page 326 - Roadside Emergencies

When fail-safe mode is activatedYou have limited engine power when in the fail-safe mode, so drive thevehicle with caution. The vehicle will not be ab

Page 327

WHAT YOU SHOULD KNOW ABOUT AUTOMOTIVE FUELSImportant safety precautionsWARNING: Do not overfill the fuel tank. The pressure in anoverfilled tank may c

Page 328

• Fuels can also be harmful if absorbed through the skin. If fuel issplashed on the skin and/or clothing, promptly remove contaminatedclothing and was

Page 329

Use the following guidelines to avoid electrostatic charge build-up whenfilling an ungrounded fuel container:• Place approved fuel container on the gr

Page 330

inlet to close properly. If this action corrects the problem, the check fuelfill inlet lamp or CHECK FUEL FILL INLET message may not resetimmediately.

Page 331

Fuel qualityIf you are experiencing starting, rough idle or hesitation driveabilityproblems during a cold start, try a different brand of “Regular” un

Page 332

Refilling with a portable fuel containerWith the Easy Fuel™ “no cap” fuel system, use the following directionswhen filling from a portable fuel contai

Page 333

ESSENTIALS OF GOOD FUEL ECONOMYMeasuring techniquesYour best source of information about actual fuel economy is you, thedriver. You must gather inform

Page 334

Customer Assistance 359Reporting safety defects (U.S. only) 366Reporting safety defects (Canada only) 366Cleaning 367Maintenance and Specifications 37

Page 335

Configurable fuel historyShown with vertical bar tachometerenabled• This display shows a bar chart ofyour fuel history, configurable to5, 10 or 30 min

Page 336

Calculating fuel economy1. Fill the fuel tank completely and record the initial odometer reading(in miles or kilometers).2. Each time you fill the tan

Page 337

• You may want to turn off the speed control in hilly terrain ifunnecessary shifting between the top gears occurs. Unnecessaryshifting of this type co

Page 338

EMISSION CONTROL SYSTEMYour vehicle is equipped with various emission control components and acatalytic converter which will enable your vehicle to co

Page 339

Do not make any unauthorized changes to your vehicle or engine. Bylaw, vehicle owners and anyone who manufactures, repairs, services,sells, leases, tr

Page 340

Readiness for Inspection/Maintenance (I/M) testingSome state/provincial and local governments may haveInspection/Maintenance (I/M) programs to inspect

Page 341

BRAKE FLUIDThe fluid level will drop slowly asthe brakes wear, and will rise whenthe brake components are replaced.Fluid levels between the MIN andMAX

Page 342

4. Latch the gearshift lever in P (Park) and leave the engine running.5. Remove the dipstick, wiping it clean with a clean, dry lint free rag. Ifneces

Page 343

Adjusting automatic transmission fluid levelsBefore adding any fluid, make sure the correct type is used. The type offluid used is normally indicated

Page 344

Changing the air filter element1. Release the clamps that securethe air filter housing cover.2. Carefully separate the two halvesof the air filter hou

Page 345

General• Store all vehicles in a dry, ventilated place.• Protect from sunlight, if possible.• If vehicles are stored outside, they require regular mai

Page 346

SettingsIn this mode, you can configure different driver setting choices. Pressthe right arrow key (when in the Settings menu) to reach the listedmode

Page 347

Cooling system• Protect against freezing temperatures.• When removing vehicle from storage, check coolant fluid level.Confirm there are no cooling sys

Page 348

• Check fluid levels (including coolant, oil and gas) to make sure thereare no leaks, and fluids are at recommended levels.• If the battery was remove

Page 349

MAINTENANCE PRODUCT SPECIFICATIONS AND CAPACITIESItem CapacityFord Part Name orequivalentFord Part Number / FordSpecificationBrake fluidBetween MIN an

Page 350

Item CapacityFord Part Name orequivalentFord Part Number / FordSpecificationEngine oil 6.0 quarts (5.7L)•Motorcraft威 SAE5W-20 PremiumSynthetic Blend M

Page 351

Item CapacityFord Part Name orequivalentFord Part Number / FordSpecificationWindshield washer fluid Fill as requiredMotorcraft威 PremiumWindshield Wash

Page 352

ENGINE DATAEngine 3.5L V6 engineCubic inches 213Required fuel Minimum 87 octaneFiring order 1-4-2-5-3-6Ignition system EDISSpark plug gap 0.052–0.056

Page 353

Vehicle identification number (VIN)The vehicle identification number islocated on the driver sideinstrument panel.Please note that in the graphic,XXXX

Page 354

TRANSMISSION CODE DESIGNATIONSYou can find a transmission code onthe Safety Compliance CertificationLabel. The following table tells youwhich transmis

Page 355

FORD CUSTOM ACCESSORIES FOR YOUR VEHICLEA wide selection of Ford Custom Accessories are available for yourvehicle through your local Ford or Ford of C

Page 356

Peace of mind•Keyless entry keypad •Vehicle security systems•Vehicle tracking and recovery* •Wheel locks•Windshield wiper shaker* •Remote start•Cargo

Page 357

VehicleRemote StartClimate Control(using thisfeature allowsyou to selectdifferent climatecontrol modeswhen the vehicleis started usingthe remote start

Page 358

FORD ESP EXTENDED SERVICE PLANS (U.S. ONLY)More than 30 million Ford and Lincoln owners have discovered thepowerful protection of Ford ESP. It is the

Page 359

Ford ESP Can Quickly Pay for ItselfOne service bill – the cost of parts and labor – can easily exceed theprice of your Ford ESP Service Contract. With

Page 360 - Customer Assistance

Ford Extended Service Plan4212011 Explorer (exp)Owners Guide, 1st PrintingUSA (fus)

Page 361

FORD ESP EXTENDED SERVICE PLANS (CANADA ONLY)You can get more protection for your vehicle by purchasing a FordExtended Service Plan (ESP). Ford ESP is

Page 362

GENERAL MAINTENANCE INFORMATIONWhy maintain your vehicle?This guide describes the scheduled maintenance required for yourvehicle. Carefully following

Page 363

Your vehicle is very sophisticated and built with multiple complexperformance systems. Every manufacturer develops these systems usingdifferent specif

Page 364

Genuine Ford parts and serviceWhen planning your maintenance services, consider your dealership forall your vehicle’s needs.There are a lot of reasons

Page 365

Owner checks and servicesCertain basic maintenance checks and inspections should be performedby the owner or a service technician at the intervals ind

Page 366

Multi-point inspectionIn order to keep your vehicle running right, it is important to have thesystems on your vehicle checked regularly. This can help

Page 367

Scheduled Maintenance Guide4282011 Explorer (exp)Owners Guide, 1st PrintingUSA (fus)

Page 368 - Cleaning

UnitsDistance Miles & Gallons / Kilometers & LitersTemperature Fahrenheit (°F) / Celsius (°C)Restore defaultsHold OK to Restore Settings to Fa

Page 369

NORMAL SCHEDULED MAINTENANCE AND LOGFor your convenience, your vehicle is equipped with a message centerwhich determines the proper oil change service

Page 370

Oil Change Service Interval* 1 23456789101112131415Change engine oil and filter • ••••••••••••••Rotate tires, inspect tire wear and measuretread depth

Page 371

Perform the services noted in the following table at the specifiedtime/mileage (km) period either within 3,000 miles (4,800 km) of theOIL CHANGE REQUI

Page 372

Maintenance schedule logDEALER VALIDATION:P&A CODE:RO#: HOURS:DAT E:MILEAGE:DEALER VALIDATION:P&A CODE:RO#: HOURS:DAT E:MILEAGE:DEALER VALIDAT

Page 373

DEALER VALIDATION:P&A CODE:RO#: HOURS:DAT E:MILEAGE:DEALER VALIDATION:P&A CODE:RO#: HOURS:DAT E:MILEAGE:DEALER VALIDATION:P&A CODE:RO#: HO

Page 374

DEALER VALIDATION:P&A CODE:RO#: HOURS:DAT E:MILEAGE:DEALER VALIDATION:P&A CODE:RO#: HOURS:DAT E:MILEAGE:DEALER VALIDATION:P&A CODE:RO#: HO

Page 375

SPECIAL OPERATING CONDITIONSIf you operate your vehicle primarily in one of the more demandingconditions listed below, you will need to have some item

Page 376

Extensive idling and/or low-speed driving for long distances as in heavycommercial use such as delivery, taxi, patrol car or liveryAs required – Chang

Page 377

Operating in dusty conditions such as unpaved or dusty roadsInspect frequently, service asrequired– Replace cabin air filter (if equipped)– Replace en

Page 378 - 9 8 7 6 5

Special operating condition logDEALER VALIDATION:P&A CODE:RO#: HOURS:DAT E:MILEAGE:DEALER VALIDATION:P&A CODE:RO#: HOURS:DAT E:MILEAGE:DEALER

Page 379

System warnings and status messagesSystem warnings alert you to possible problems or malfunctions in yourvehicle’s operating systems.In the event of a

Page 380

DEALER VALIDATION:P&A CODE:RO#: HOURS:DAT E:MILEAGE:DEALER VALIDATION:P&A CODE:RO#: HOURS:DAT E:MILEAGE:DEALER VALIDATION:P&A CODE:RO#: HO

Page 381

EXCEPTIONSIn addition, there are several exceptions to the Normal Schedule. Theyare listed below:Normal vehicle axle maintenance❑Rear axles and power

Page 382

ENGINE COOLANT CHANGE RECORDInitial change 6 years or 100,000 miles (160,000 km)(whichever comes first)After initial change Every 3 years or 50,000 mi

Page 383

AAccessory delay ...99Active Park Assist ...303Adaptive Cruise Control ...105AdvanceTrac ...

Page 384

Changing a tire ...336Child safety seats ...216in front seat ...217in rear seat ...

Page 385

idle speed control ...382lubrication specifications ...411refill capacities ...411service points ...

Page 386

Inspection/maintenance (I/M)testing ...403Instrument panelcleaning ...370cluster

Page 387

Overdrive ...288PParental MyKeyprogramming ...132Park Assist ...

Page 388

Scheduled Maintenance GuideNormal ScheduledMaintenance and Log ...429Seats ...160child safety seats .

Page 389

UUniversal garage door opener ..116VVehicle Identification Number(VIN) ...415Vehicle loading ...

Page 390

CHECK BRAKE SYSTEM — Displayed when the brake system needsservicing. If the warning stays on or continues to come on, contact yourauthorized dealer as

Page 391

WASHER FLUID LEVEL LOW — Indicates the washer fluid reservoiris less than one quarter full. Check the washer fluid level. Refer toWindshield washer fl

Page 392

AWD OFF (if equipped) — Displayed when the 4WD system has beenautomatically disabled to protect itself. This is caused by operating thevehicle with th

Page 393

MODE CHANGE NOT ACCEPTED, RETRY (if equipped) —Displayed when hill descent control mode cannot be changed at time ofdriver request.OFF ROAD MODE ENABL

Page 394

MYKEY NOT CREATED — Displayed during key programming whenMyKey™ cannot be programmed.NO KEY DETECTED (if equipped) — Displayed if the IntelligentAcces

Page 395

CONGRATULATIONSCongratulations on acquiring your new Ford Motor Company product.Please take the time to get well acquainted with your vehicle by readi

Page 396 - (R+M)/2 METHOD

ADAPTIVE CRUISE MALFUNCTION (if equipped) — Displayedwhen a radar malfunction is preventing the ACC from engaging.ADAPTIVE CRUISE NOT AVAILABLE (if eq

Page 397

CROSS TRAFFIC VEHICLE COMING FROM LEFT (if equipped)— Displayed when the blind spot information system with cross trafficalert (CTA) system is operati

Page 398

MYFORD™ SYSTEM (IF EQUIPPED)WARNING: Driving while distracted can result in loss of vehiclecontrol, accident and injury. Ford strongly recommends that

Page 399

2. You can press some of the hard buttons to access their respectivemenus.3. Use the center control in thesame manner you would a joystick— press/ to

Page 400

RadioPress RADIO to access the radio screen. From this screen you can:• Press RADIO repeatedly to cycle through AM, AM2-AST, FM1, FM2,FM3-AST frequenc

Page 401

Radio optionsTo access more options in radio mode, press MENU > Radio and selectfrom:• Scan: Select to hear a brief sampling of all available radio

Page 402

• Press / to seek to the previous/next channel within theselected category.• To save a channel as a preset, acquire the desired channel and thenpress

Page 403

SIRIUS威 optionsTo access other options in SIRIUS mode, press MENU > SIRIUS.• Scan: Select for a brief sampling of all available channels.• Show ESN

Page 404

Satellite radio information (if activated)SIRIUS威 satellite radio service:SIRIUS威 satellite radio is asubscription based satellite radioservice that b

Page 405

Troubleshooting tipsRadio Display Condition Possible actionAcquiring Radio requires morethan two seconds toproduce audio for theselected channel.No ac

Page 406

SAFETY AND ENVIRONMENT PROTECTIONWarning symbols in this guideHow can you reduce the risk of personal injury to yourself or others? Inthis guide, answ

Page 407

Radio Display Condition Possible actionNo Channels Available All the channels inthe selected categoryare skipped or locked.Using the channelguide, unl

Page 408

CD tips• Handle discs by their edges only.(Never touch the playing surface).• Inspect discs before playing.• Clean only with an approved CD cleaner.•

Page 409

3. Turn your portable music player on and adjust the volume to 1/2 offull volume.4. Press AUX repeatedly until Auxiliary audio active or Line in activ

Page 410

MYFORD TOUCH™ (IF EQUIPPED)WARNING: Driving while distracted can result in loss of vehiclecontrol, accident and injury. Ford strongly recommends thatd

Page 411

SINGLE ZONE MANUAL SYSTEM WITH REAR CLIMATECONTROLS (IF EQUIPPED)Temperature conversion: To switch between Fahrenheit and Celsius:Press MENU > Disp

Page 412

5. (Multifunction control): Press repeatedly to toggle through thesettings and manually choose one of the following air distribution modes:•: Distribu

Page 413

Operating tips• To reduce fog build-up on the windshield during humid weather,select(defrost) or (floor/defrost).• To reduce humidity build-up inside

Page 414

AUTOMATIC TEMPERATURE CONTROL SYSTEMSDual Automatic Temperature Control (DATC) Sony system(if equipped)Note: Your climate control system is touch sens

Page 415

3. (Recirculated air): Press to activate/deactivate air recirculationin the vehicle. Recirculated air may reduce the amount of time to cooldown the in

Page 416 - XXXXXXXXXXXXXXXXX

Dual Automatic Temperature Control (DATC) system with MyTemp(if equipped)Note: Your climate control system is touch sensitive. You need onlylightly to

Page 417

PERCHLORATE MATERIALCertain components of this vehicle such as airbag modules, seat beltpretensioners, and button cell batteries may contain Perchlora

Page 418 - Accessories

3. MAX A/C: Distributes recirculated air through the instrument panelvents to cool the vehicle. This re-cooling of the interior air is moreeconomical

Page 419

Operating tips• To reduce fog build-up on the windshield during humid weather,select(defrost) or (floor/defrost).• To reduce humidity build-up inside

Page 420 - Ford Extended Service Plan

Touchscreen features (if equipped)Press the lower right corner on the touchscreen to access these features.1.(Power): Press to activate/deactivate the

Page 421

5. MAX A/C: Press to distribute recirculated air through the instrumentpanel vents to cool the vehicle. This is more economical and efficientthan norm

Page 422

11. Driver settings:• Press the red arrow to increase the temperature and press the bluearrow to decrease the temperature.• Pressto control the heated

Page 423

• Rear Defrost On • Rear Defrost Off• Recirc On • Recirc Off• Panel On • Panel Floor On• Floor On • Windshield Floor On• Temperature High • Temperatur

Page 424 - Scheduled Maintenance Guide

REAR WINDOW DEFROSTERThe rear defroster control is located on the instrument panel or in thetouchscreen display (if equipped).Press the rear defroster

Page 425

CABIN AIR FILTERThe cabin air filter element is designed to reduce the concentration ofairborne particles such as dust, spores and pollen in the air b

Page 426

HEADLAMP CONTROLTurns the lamps off.Turns on the parkinglamps, instrument panel lamps,license plate lamps and tail lamps.Turns the headlamps on.Autola

Page 427

3. Rotate the headlamp control to the off position.4. Turn the vehicle on.5. Turn the vehicle off.6. Turn the headlamp control to the autolamp positio

Page 428

Notice to owners of pickup trucks and utility type vehiclesWARNING: Utility vehicles have a significantly higher rolloverrate than other types of vehi

Page 429

Daytime running lamps (DRL) (if equipped)To activate DRL:• the ignition must be in the on position and• the headlamp control is in theor position• the

Page 430

Dome lamp controlUse to manually turn the dome lampon.• Press the control. This will turnon the interior courtesy lights.The lights will remain on unt

Page 431

• (1) 8 feet (2.4 m)• (2) Center height of lamp toground• (3) 25 feet (7.6 m)• (4) Horizontal reference line2. The center of the headlamp has a3.0 mm

Page 432

5. Locate the vertical adjuster foreach headlamp. Using a Phillips #2screwdriver, turn the adjustercontrol either clockwise (to adjustdown) or counter

Page 433

INTERIOR LAMPSFront row map lamps (if equipped)To turn on the map lamps, press theouter edge of the clear lens. Thefront row map lamp lights when:• an

Page 434

Third row cargo lampThe dome lamp lights when:• any door is opened.• the instrument panel dimmerbutton is pressed until thecourtesy lamp comes on.• an

Page 435

Using the right bulbsReplacement bulbs are specified in the chart below. Headlamp bulbs mustbe marked with an authorized “D.O.T.” for North America an

Page 436

Replacing exterior bulbsCheck the operation of all the bulbs frequently.Replacing headlamp bulbs1. Make sure that the headlamp control is in the off p

Page 437

Replacing front parking lamp/turn signal bulbs1. Make sure that the headlampcontrol is in the off position.2. Open the hood.3. Remove the hood oversla

Page 438

Replacing sidemarker bulbs1. Make sure that the headlampcontrol is in the off position.2. Open the hood.3. Remove the hood overslambumper tower to ser

Page 439

DATA RECORDINGService Data RecordingService data recorders in your vehicle are capable of collecting andstoring diagnostic information about your vehi

Page 440

5. Pull the bulb straight out of thesocket.Reverse steps to reinstall bulb(s).Replacing turn/backup lamp bulbsThe turn/backup lamp bulbs are located i

Page 441

5. Disconnect the electricalconnector (1) from the lampassembly. Disconnect the bulbsocket (2) from the lamp assemblyby squeezing the two tabs at the

Page 442

Replacing fog lamp bulbs1. Make sure the headlamp switch isoff.2. Remove the bulb socket from thefog lamp by turning itcounterclockwise.3. Disconnect

Page 443

WINDSHIELD WIPERSWindshield wiper: Rotate the endof the control away from you toincrease the speed of the wipers;rotate towards you to decrease thespe

Page 444

Windshield washer: Press the endof the stalk:• briefly: causes a single swipe ofthe wipers without washer fluid.• a quick press and hold: thewipers wi

Page 445

Reverse wiper feature: The rear wiper will be automatically activated inan intermittent setting when shifting into R (Reverse) if the front wipersare

Page 446

OVERHEAD CONSOLEThe appearance of your vehicle’s overhead console will vary according toyour option package.Storage compartmentThe storage compartment

Page 447

Rear center console features (if equipped)The rear center console incorporates the following features:• Flip forward armrest to provide aflat load flo

Page 448

To have full capacity usage of your power point, the engine is required tobe running to avoid unintentional discharge of the battery. To preventthe ba

Page 449

The power point can switch to a fault mode when it is overloaded,overheated, or shorted. For overloading and shorting conditions, unplugyour device an

Commentaires sur ces manuels

Pas de commentaire