Ford 2011 Crown Victoria v.1 Manuel d'utilisateur télécharger pdf (Page 204)

Before placing the jack under the vehicle, NOTE the jack location

markings:

JACK LOCATION

The jack location markings can be

found on the lower outer edge of

the body.

• Locate the jack locator mark (B)

on the body (C) near the tire you

are changing, then place the jack

(D) under the frame (A) of

the vehicle aligning it with the

mark (B).

• Position the jack according to the

following guides and turn the jack

handle clockwise until the wheel

is completely off the ground.

WARNING: To lessen risk

of personal injury, do not

put any part of your body under

the vehicle while changing a tire.

Do not start the engine when your

vehicle is on the jack. The jack is

ONLY meant for changing the tire.

• Never use the rear differential as a jacking point.

4. Remove the metal lug nuts with the lug wrench.

5. Replace the flat tire/wheel assembly with the spare tire/wheel

assembly, making sure the valve stem is facing outward. Reinstall lug

nuts until the wheel is snug against the hub. Do not fully tighten the lug

nuts until the wheel has been lowered.

Roadside Emergencies

204

2011 Crown Victoria (cro)

Owners Guide, 1st Printing

USA (fus)

1 2 ... 199 200 201 202 203 204 205 206 207 208 209 ... 330 331

Pas de commentaire

Ford 2011 Crown Victoria v.1 Manuel d'utilisateur Page 204