Ford 2005 E-450 v.3 Manuel d'utilisateur télécharger pdf (Page 44)

3. Turn on the low beam headlamps

and open the hood.

4. Locate the high intensity area of

the beam pattern and place the top

edge of the intensity zone even with

the horizontal reference line (4). If

the top edge of the high intensity

area is not even with the horizontal

line, follow the next step to adjust

it.

• Aerodynamic: Locate the

vertical adjuster (2) for each

headlamp. Adjust the aim by

turning the adjuster control either

clockwise (to adjust up) or

counterclockwise (to adjust

down).

• Sealed beam: Locate the vertical

adjuster (1) for each headlamp.

Adjust the aim by turning the

adjuster control either clockwise

(to adjust up) or

counterclockwise (to adjust

down).

6. In addition to the horizontal line

marked in step 2, a pair of vertical

lines (5) must be marked at the

center line of the headlamps on the

wall or screen.

7. On the wall or screen, locate the high intensity area of the beam

pattern. The left edge of the high intensity area should be even with the

vertical line corresponding to the headlamp under adjustment. If the left

edge of the high intensity area is not even with the vertical line, follow

the next step to adjust it.

2005 Econoline (eco)

Owners Guide (post-2002-fmt)

USA (fus)

Lights

1 2 ... 39 40 41 42 43 44 45 46 47 48 49 ... 247 248

Pas de commentaire

Ford 2005 E-450 v.3 Manuel d'utilisateur Page 44