Ford 2005 E-450 v.3 Manuel d'utilisateur télécharger pdf (Page 166)

On commercial stripped chassis

vehicles, this switch is located on a

bracket above the brake pedal.

To reset the switch:

1. Turn the ignition OFF.

2. Check the fuel system for leaks.

3. If no leaks are apparent, reset the

switch by pushing in on the reset

button.

4. Turn the ignition ON.

5. Wait a few seconds and return

the key to OFF.

6. Make another check for leaks.

FUSES AND RELAYS

Fuses

If electrical components in the

vehicle are not working, a fuse may

have blown. Blown fuses are

identified by a broken wire within

the fuse. Check the appropriate

fuses before replacing any electrical

components.

Note: Always replace a fuse with one that has the specified amperage

rating. Using a fuse with a higher amperage rating can cause severe wire

damage and could start a fire.

2005 Econoline (eco)

Owners Guide (post-2002-fmt)

USA (fus)

Roadside Emergencies

166

1 2 ... 161 162 163 164 165 166 167 168 169 170 171 ... 247 248

Pas de commentaire

Ford 2005 E-450 v.3 Manuel d'utilisateur Page 166