Ford 2002 Mustang v.1 Manuel d'utilisateur télécharger pdf (Page 77)

4. Disconnect the

electrical connector

from the bulb by

pulling rearward.

5. Remove the bulb

retaining ring by

rotating it

counterclockwise

(when viewed from the

rear) to free it from

the bulb socket, and slide the ring off the plastic

base. Keep the ring to retain the new bulb.

6. Without turning,

remove the old bulb

from the lamp

assembly by gently

pulling it straight out of

the lamp assembly.

To install the new bulb:

Handle a halogen headlamp bulb carefully

and keep out of children’s reach. Grasp the

bulb only by its plastic base and do not touch the

glass. The oil from your hand could cause the bulb

to break the next time the headlamps are

operated.

1. With the flat side of the new bulb’s plastic base

facing upward, insert the glass end of the bulb into

the lamp assembly. You may need to turn the bulb

left or right to align the grooves in the plastic base

with the tabs in the lamp assembly. When the

grooves are aligned, push the bulb into the lamp

assembly until the plastic base contacts the rear of

the lamp assembly.

2. Install the bulb retaining ring over the plastic base

until it contacts the rear of the socket by rotating

clockwise until you feel a “stop.”

Lights

1 2 ... 72 73 74 75 76 77 78 79 80 81 82 ... 263 264

Pas de commentaire

Ford 2002 Mustang v.1 Manuel d'utilisateur Page 77