Ford 2011 Taurus v.2 Manuel d'utilisateur télécharger pdf (Page 305)

100

101

WARNING: Do not connect the end of the second cable to the

negative (-) terminal of the battery to be jumped. A spark may

cause an explosion of the gases that surround the battery.

Ensure that the cables are clear of fan blades, belts, moving parts of both

engines, or any fuel delivery system parts.

Jump starting

1. Start the engine of the booster vehicle and run the engine at

moderately increased speed.

2. Start the engine of the disabled vehicle.

3. Once the disabled vehicle has been started, run both engines for an

additional three minutes before disconnecting the jumper cables.

Removing the jumper cables

Remove the jumper cables in the reverse order that they were

connected.

Note: In the illustration, the vehicle on the bottom is used to designate

the assisting (boosting) battery.

1. Remove the jumper cable from

the ground metal surface.

2. Remove the jumper cable on the

negative (-) terminal of the booster

vehicle’s battery.

3. Remove the jumper cable from

the positive (+) terminal of the

booster vehicle’s battery.

4. Remove the jumper cable from

the positive (+) terminal of the

disabled vehicle’s battery.

After the disabled vehicle has been started and the jumper cables

removed, allow it to idle for several minutes so the engine computer can

relearn its idle conditions.

–

Roadside Emergencies

305

2011 Taurus

Owners Guide, 2nd Printing

USA (fus)

1 2 ... 300 301 302 303 304 305 306 307 308 309 310 ... 403 404

Commentaires sur ces manuels

Pas de commentaire

Ford 2011 Taurus v.2 Manuel d'utilisateur Page 305

Commentaires sur ces manuels

Produits connexes et manuels pour Voitures Ford 2011 Taurus v.2