Ford 2011 Taurus v.2 Manuel d'utilisateur télécharger pdf (Page 250)

If the steering wanders or pulls equipped with either EPS or Hydraulic

steering system, check for:

• an improperly inflated tire

• uneven tire wear

• loose or worn suspension components

• loose or worn steering components

• improper vehicle alignment

A high crown in the road or high crosswinds may also make the steering

seem to wander/pull.

BRAKE-SHIFT INTERLOCK

This vehicle is equipped with a brake-shift interlock feature that prevents

the gearshift lever from being moved from P (Park) when the ignition is

in the on position unless the brake pedal is pressed.

If you cannot move the gearshift lever out of P (Park) with the ignition

in the on position and the brake pedal pressed, it is possible that a fuse

has blown or the vehicle’s brake lamps are not operating properly. Refer

to Fuses and relays in the Roadside Emergencies chapter.

If the fuse is not blown and the brake lamps are working properly, the

following procedure will allow you to move the gearshift lever from P

(Park). Note: For some markets this feature will be disabled.

1. Apply the parking brake.

2. Remove the cup holder insert.

3. Using a screwdriver (or similar

tool), remove the protective cover

to the interlock release access hole

on the console.

4. Insert the screwdriver (or similar

tool) into the access hole and press

while pulling the gearshift lever out

of the P (Park) position and into

the N (Neutral) position.

5. Remove the tool and reinstall the

protective cover.

6. Start the vehicle and release the parking brake.

See your authorized dealer as soon as possible if this procedure

is used.

Driving

250

2011 Taurus

Owners Guide, 2nd Printing

USA (fus)

1 2 ... 245 246 247 248 249 250 251 252 253 254 255 ... 403 404

Pas de commentaire

Ford 2011 Taurus v.2 Manuel d'utilisateur Page 250