Ford 2011 Taurus v.2 Manuel d'utilisateur télécharger pdf (Page 117)

100

101

Deactivating/activating autounlock feature

Your vehicle comes with the autounlock feature activated; there are three

methods to enable/disable this feature:

• Through your authorized dealer,

• by using a power door unlock/lock sequence, or

• by using the instrument cluster message center. Refer to Message

center in the Instrument Cluster chapter.

Note: The autounlock feature can be activated/deactivated

independently of the autolock feature.

Power door lock switch autounlock enable/disable procedure

Before starting, ensure the ignition is off and all vehicle doors are closed.

You must complete Steps 1–5 within 30 seconds or the procedure will

have to be repeated. If the procedure needs to be repeated, wait a

minimum of 30 seconds before beginning again.

1. Turn the ignition on.

2. Press the power door unlock

control on the door panel three

times.

3. Turn the ignition off.

4. Press the power door unlock

control on the door panel three

times.

5. Turn the ignition back on. The horn will chirp one time to confirm

programming mode has been entered and is active.

6. To enable/disable the autounlock feature, press the lock control, then

press the unlock control. The horn will chirp once if autounlock was

deactivated or twice (one short and one long chirp) if autounlock was

activated.

7. Turn the ignition off. The horn will chirp once to confirm the

procedure is complete.

Locks and Security

117

2011 Taurus

Owners Guide, 2nd Printing

USA (fus)

1 2 ... 112 113 114 115 116 117 118 119 120 121 122 ... 403 404

Commentaires sur ces manuels

Pas de commentaire

Ford 2011 Taurus v.2 Manuel d'utilisateur Page 117

Commentaires sur ces manuels

Produits connexes et manuels pour Voitures Ford 2011 Taurus v.2