Ford 2011 Crown Victoria v.3 Manuel d'utilisateur télécharger pdf (Page 47)

HEADLAMP CONTROL

Turns the lamps off.

Turns on the parking

lamps, instrument panel lamps,

license plate lamps and tail lamps.

Turns the headlamps on.

Autolamp control (if equipped)

The autolamp system provides light

sensitive automatic on-off control of

the exterior lights normally

controlled by the headlamp control.

The autolamp system also keeps the

lights on for a predetermined period

of time after the ignition switch is

turned to off. The delay period can

be adjusted up to a maximum of

approximately three minutes in

duration.

• To turn autolamps on, rotate the control counterclockwise to the next

position from off.

• To turn autolamps off, rotate the control clockwise.

The headlamps will also turn on when the wipers are turned on.

To change the duration of the autolamp delay, perform the following

sequence:

Note: Steps 2 through 5 must be carried out within a 10 second period.

1. Start with the ignition switch in the off position and the headlamp

switch in the autolamp position.

2. Place the headlamp switch in the off position.

3. Place the ignition switch in the on position and then back to off.

4. Place the headlamp switch in the autolamp position.

• At this point, the exterior lamps turn on.

5. At the desired autolamp time delay, place the headlamp switch in the

off position.

• At this point, the exterior lamps turn off and the time delay is set.

Lights

2011 Crown Victoria (cro)

Owners Guide, 3rd Printing

USA (fus)

1 2 ... 42 43 44 45 46 47 48 49 50 51 52 ... 332 333

Pas de commentaire

Ford 2011 Crown Victoria v.3 Manuel d'utilisateur Page 47