Ford 2011 Crown Victoria v.3 Manuel d'utilisateur télécharger pdf (Page 210)

100

101

Jump starting

1. Start the engine of the booster vehicle and run the engine at

moderately increased speed.

2. Start the engine of the disabled vehicle.

3. Once the disabled vehicle has been started, run both engines for an

additional three minutes before disconnecting the jumper cables.

Removing the jumper cables

Remove the jumper cables in the reverse order that they were

connected.

Note: In the illustration, the vehicle on the bottom is used to designate

the assisting (boosting) battery.

1. Remove the jumper cable from

the ground metal surface.

2. Remove the jumper cable on the

negative (-) terminal of the booster

vehicle’s battery.

3. Remove the jumper cable from

the positive (+) terminal of the

booster vehicle’s battery.

4. Remove the jumper cable from

the positive (+) terminal of the

disabled vehicle’s battery.

After the disabled vehicle has been started and the jumper cables

removed, allow it to idle for several minutes so the engine computer can

relearn its idle conditions.

–

Roadside Emergencies

210

2011 Crown Victoria (cro)

Owners Guide, 3rd Printing

USA (fus)

1 2 ... 205 206 207 208 209 210 211 212 213 214 215 ... 332 333

Commentaires sur ces manuels

Pas de commentaire

Ford 2011 Crown Victoria v.3 Manuel d'utilisateur Page 210

Commentaires sur ces manuels

Produits connexes et manuels pour Voitures Ford 2011 Crown Victoria v.3