Ford 2011 Crown Victoria v.3 Manuel d'utilisateur télécharger pdf (Page 259)

The transmission fluid should be in

this range if at normal operating

temperature (150°F-170°F

[66°C-77°C]).

The transmission fluid should be in

this range if at ambient temperature

(50°F-95°F [10°C-35°C]).

High fluid level

Fluid levels above the safe range

may result in transmission failure.

An overfill condition of transmission

fluid may cause shift and/or

engagement concerns and/or

possible damage.

High fluid levels can be caused by an overheating condition.

Adjusting automatic transmission fluid levels

Before adding any fluid, make sure the correct type is used. The type of

fluid used is normally indicated on the dipstick. Refer to Maintenance

product specifications and capacities in this chapter.

Use of a non-approved automatic transmission fluid may cause

internal transmission component damage.

If necessary, add fluid in 1/2 pint (250 ml) increments through the filler

tube until the level is correct.

If an overfill occurs, excess fluid

should be removed by an authorized

dealer.

An overfill condition of

transmission fluid may cause

shift and/or engagement concerns and/or possible damage.

Do not use supplemental transmission fluid additives, treatments or

cleaning agents. The use of these materials may affect transmission

operation and result in damage to internal transmission components.

Maintenance and Specifications

259

2011 Crown Victoria (cro)

Owners Guide, 3rd Printing

USA (fus)

1 2 ... 254 255 256 257 258 259 260 261 262 263 264 ... 332 333

Pas de commentaire

Ford 2011 Crown Victoria v.3 Manuel d'utilisateur Page 259