Ford 2010 Fusion Hybrid v.3 Manuel d'utilisateur télécharger pdf (Page 97)

Using speed control

The speed controls are located on the steering wheel. The following

buttons work with speed control:

– SET +: Press to increase or

decrease the set speed.

CNCL (Cancel)/RSM (Resume):

Press to return cancel or resume a

set speed.

ON/OFF: Press to turn speed

control on or off.

Setting speed control

To set speed control:

1. Press and release ON.

2. Accelerate to the desired speed.

3. Press and release SET +.

4. Take your foot off the accelerator pedal.

5. The indicator

light on the instrument cluster will turn on.

Note:

• Vehicle speed may vary momentarily when driving up and down a

steep hill.

• If the vehicle speed increases above the set speed on a downhill, you

may want to apply the brakes to reduce the speed.

• If the vehicle speed decreases more than 10 mph (16 km/h) below

your set speed on an uphill, your speed control will disengage.

Disengaging speed control

To disengage speed control, tap the brake pedal or press CNCL.

Disengaging the speed control will not erase the previous set speed.

Note: When you use the clutch pedal to disengage the speed control,

the engine speed may briefly increase, this is normal.

Resuming a set speed

Press and release RSM. This will automatically return the vehicle to the

previously set speed.

Driver Controls

2010 Fusion Hybrid (hfv)

Owners Guide, 3rd Printing

USA (fus)

1 2 ... 92 93 94 95 96 97 98 99 100 101 102 ... 328 329

Pas de commentaire

Ford 2010 Fusion Hybrid v.3 Manuel d'utilisateur Page 97