Ford 2010 Fusion Hybrid v.3 Manuel d'utilisateur télécharger pdf (Page 83)

Replacing interior bulbs

Check the operation of all bulbs frequently.

Replacing exterior bulbs

Check the operation of all the bulbs frequently.

Replacing headlamp bulbs

For bulb replacement, see your authorized dealer.

Replacing front parking lamp/turn signal bulbs

For bulb replacement, see your authorized dealer.

Replacing front side marker bulbs

1. Make sure the headlamp control

is in the off position.

2. Remove the press pins located in

the wheel well and pull the splash

shield back.

3. At the wheel opening, remove the

bolt and pull the lamp away from

the vehicle.

4. Rotate the socket clockwise while

holding the electrical connector in

place with your other hand. Disengage the wire harness and bulb from

the lamp.

5. With the bulb exposed, carefully remove the bulb from the socket by

grasping the bulb and pulling it away from the wire harness.

Replace with a new bulb, and reverse the removal steps to complete the

process.

Replacing tail/brake/turn signal/backup lamp bulbs

The tail/brake/turn signal and backup lamp bulbs are located in the tail

lamp assembly. Follow the same steps to replace either bulb.

1. Make sure the headlamp switch is in the off position and open the

trunk.

2. Lift out trunk floor carpeting panel to access a luggage scuff plate

(hard molding) and a trunk side panel (dark grey, soft wheelhouse side

trim panel) at the lamp area.

3. Carefully pull/push the trunk side panel (dark grey, soft wheelhouse

side trim panel) outboard to expose the lamp assembly. The most

Lights

2010 Fusion Hybrid (hfv)

Owners Guide, 3rd Printing

USA (fus)

1 2 ... 78 79 80 81 82 83 84 85 86 87 88 ... 328 329

Pas de commentaire

Ford 2010 Fusion Hybrid v.3 Manuel d'utilisateur Page 83