Ford 2010 Fusion Hybrid v.3 Manuel d'utilisateur télécharger pdf (Page 139)

How to disengage the automatic locking mode

WARNING: Ford Motor Company recommends that all

passenger safety belt assemblies and attaching hardware should

be inspected by an authorized dealer after any collision to verify that

the ⬙automatic locking retractor⬙ feature for child seats is still working

properly. Safety belt assemblies should be inspected by an authorized

dealer and must be replaced if either damage or improper operation is

noted. Failure to replace the belt and retractor assembly could

increase the risk of injury in a collision.

Unbuckle the combination lap/shoulder belt and allow it to retract

completely to disengage the automatic locking mode and activate the

vehicle sensitive (emergency) locking mode.

Safety belt height adjustment

Your vehicle has safety belt height

adjustments at the front outboard

seating positions. Adjust the height

of the shoulder belt so the belt rests

across the middle of your shoulder.

To adjust the shoulder belt height,

pull on the center button and slide

the height adjuster up or down.

Release the button and pull down

on the height adjuster to make sure

it is locked in place.

WARNING: Position the safety belt height adjusters so that the

belt rests across the middle of your shoulder. Failure to adjust

the safety belt properly could reduce the effectiveness of the safety

belt and increase the risk of injury in a collision.

Safety belt pretensioner

Your vehicle is equipped with safety belt pretensioners at the driver and

front outboard passenger seating positions.

The safety belt pretensioner tightens the safety belts firmly against the

occupant’s body at the start of the crash.

Seating and Safety Restraints

139

2010 Fusion Hybrid (hfv)

Owners Guide, 3rd Printing

USA (fus)

1 2 ... 134 135 136 137 138 139 140 141 142 143 144 ... 328 329

Pas de commentaire

Ford 2010 Fusion Hybrid v.3 Manuel d'utilisateur Page 139