Ford 2010 Fusion Hybrid v.3 Manuel d'utilisateur télécharger pdf (Page 76)

HEADLAMP CONTROL

Turns the lamps off.

Turns on the parking lamps,

instrument panel lamps, license

plate lamps and tail lamps.

Turns the low beam headlamps

on.

Autolamp control (if equipped)

The autolamp system provides light

sensitive automatic on-off control of

the exterior lights normally

controlled by the headlamp control.

• To turn autolamps on, rotate the

control to

• To turn autolamps off, rotate the

control from the autolamp

position.

The autolamp system also keeps the lights on for a predetermined

amount of time after the ignition switch is turned to off. You can change

the amount of time the lamps stay on by using the programming

procedure that follows:

Note: If the vehicle is equipped with autolamps, it will have the

headlamps on with windshield wipers feature. If the windshield

wipers are turned on, the exterior lamps will turn on with the headlamp

control in the autolamp position.

Autolamps - programmable exit delay

Programmable exit delay allows the length of the autolamp exit delay to

be changed.

To program the auto lamp exit time delay:

1. Start with the ignition in the off position and the headlamp control in

the autolamp position.

2. Turn the headlamp control to off.

3. Turn the ignition switch to on and then back to off.

Lights

2010 Fusion Hybrid (hfv)

Owners Guide, 3rd Printing

USA (fus)

1 2 ... 71 72 73 74 75 76 77 78 79 80 81 ... 328 329

Pas de commentaire

Ford 2010 Fusion Hybrid v.3 Manuel d'utilisateur Page 76