Ford 2010 Fusion Hybrid v.3 Manuel d'utilisateur télécharger pdf (Page 69)

5. Power/ : Press to activate/deactivate the climate control

system. When the system is off, outside air is prevented from entering

the vehicle through the vents. Press +

or – to select the desired

fan speed manually. To return to full automatic control, press AUTO.

: Distributes air through the instrument panel vents. To return to

full automatic control, press AUTO.

: Distributes air through the instrument panel vents, demister

vents, floor vents and rear seat floor vents. To return to full automatic

control, press AUTO.

: Distributes air through the demister vents, floor vents and rear

seat floor vents. To return to full automatic control, press AUTO.

9. PASS TEMP (passenger temperature): Press to engage/disengage

separate passenger side temperature control. Turn to increase/decrease

the temperature on the passenger side of the vehicle. The recommended

initial setting is between 72°F (22°C) and 75°F (24°C), then adjust for

comfort. The passenger side temperature setting will appear in the upper

right corner of the display.

Each time the vehicle is started and driven without an occupant in the

front passenger seat, the climate control system may default to single

zone operation to improve fuel economy. This smart-zone feature will

turn off the passenger temperature display and the temperature control

will be based on the driver’s temperature setting. If dual zone operation

is desired without a front passenger present, press PASS TEMP or adjust

the passenger temperature normally. The system will remain in dual zone

mode.

To disable the smart-zone feature: Press and hold PASS TEMP for

more than four seconds. Both temperature displays will begin flashing to

signify that the feature has been disabled. The system will return to the

previous mode after PASS TEMP is release.

To re-enable the smart-zone feature: Press and hold PASS TEMP for

more than four seconds. The driver’s temperature display will begin

flashing to signify that the feature has been re-enabled. The system will

return to the previous mode after PASS TEMP is released.

10.

Passenger heated seat control (if equipped): Press to

activate/deactivate the passenger heated seat. See Heated seats in the

Seating and Safety Restraints chapter.

Climate Controls

2010 Fusion Hybrid (hfv)

Owners Guide, 3rd Printing

USA (fus)

1 2 ... 64 65 66 67 68 69 70 71 72 73 74 ... 328 329

Pas de commentaire

Ford 2010 Fusion Hybrid v.3 Manuel d'utilisateur Page 69