Ford 2010 Fusion Hybrid v.3 Manuel d'utilisateur télécharger pdf (Page 34)

Vehicle power gauge (empower

instrument cluster only): When

the transmission is in a drive gear

only, this gauge shows you vehicle

power demand and gasoline engine

on/off threshold. It is designed to

show you how close you are to the

gasoline engine on/off threshold and

how much power you are requesting

by how much you press on the

accelerator pedal.

The red level indicator shows vehicle power demand. The more you

press on the accelerator pedal, the more power you demand of the

vehicle. The green box shows the gasoline engine on/off threshold. If

vehicle power demand is reduced, the gasoline engine will turn off when

the red level indicator moves below the green box. In this case, the

hybrid system is operating in electric vehicle mode and ⬙EV⬙ is displayed

at the bottom of the gauge. When the red level indicator exceeds the

threshold, the system commands the gasoline engine on (and the ⬙EV⬙

disappears).

When the gasoline engine is on for reasons outside of your control (such

as warming up the system or charging a low battery), the gasoline engine

on/off threshold (green box) disappears. When the on/off threshold box

is not displayed, the gasoline engine will not turn off regardless of how

little power you demand (even lifting your foot off of the accelerator).

Odometer: Registers the total miles

(kilometers) of the vehicle.

Refer to Message center in this

chapter on how to switch the

display from Metric to English.

Trip odometer: Registers the miles

(kilometers) of individual journeys.

Press and release the message

center INFO button until TRIP A

mode appears in the display. Press

the button again to select the TRIP

B feature. Press the RESET button

to reset.

Instrument Cluster

2010 Fusion Hybrid (hfv)

Owners Guide, 3rd Printing

USA (fus)

1 2 ... 29 30 31 32 33 34 35 36 37 38 39 ... 328 329

Pas de commentaire

Ford 2010 Fusion Hybrid v.3 Manuel d'utilisateur Page 34