Ford 2010 F-150 v.1 Manuel d'utilisateur télécharger pdf (Page 395)

Adjusting automatic transmission fluid levels

Before adding any fluid, make sure the correct type is used. The type of

fluid used is normally indicated on the dipstick. Refer to Maintenance

product specifications and capacities in this chapter.

Use of a non-approved automatic transmission fluid may cause

internal transmission component damage.

If necessary, add fluid in 1/2 pint (250 ml) increments through the filler

tube until the level is correct.

If an overfill occurs, excess fluid

should be removed by an authorized

dealer.

An overfill condition of

transmission fluid may cause

shift and/or engagement concerns and/or possible damage.

Do not use supplemental transmission fluid additives, treatments or

cleaning agents. The use of these materials may affect transmission

operation and result in damage to internal transmission components.

Checking 6-speed automatic transmission fluid

The automatic transmission does not have a transmission fluid dipstick.

Refer to your scheduled maintenance information for scheduled

intervals for fluid checks and changes. Your transmission does not

consume fluid. However, the fluid level should be checked if the

transmission is not working properly, (i.e., if the transmission slips or

shifts slowly) or if you notice some sign of fluid leakage.

Transmission fluid should be checked by an authorized dealer. If

required, fluid should be added by an authorized dealer.

Do not use supplemental transmission fluid additives, treatments or

cleaning agents. The use of these materials may affect transmission

operation and result in damage to internal transmission components.

Maintenance and Specifications

395

2010 F-150 (f12)

Owners Guide, 1st Printing

USA (fus)

1 2 ... 390 391 392 393 394 395 396 397 398 399 400 ... 418 419

Pas de commentaire

Ford 2010 F-150 v.1 Manuel d'utilisateur Page 395