Ford 2010 F-150 v.1 Manuel d'utilisateur télécharger pdf (Page 24)

HOLD RESET FOR SETUP MENU

Press and hold the SELECT/RESET stem when this message is displayed

to get into the SETUP menu. The following setup items are available:

OIL LIFE

This displays the remaining oil life.

An oil change is required whenever indicated by the message center and

according to the recommended maintenance schedule. USE ONLY

RECOMMENDED ENGINE OILS.

To reset the oil monitoring system to 100% after each oil change

(approximately 7,500 miles [12,000 km] or 12 months) perform the

following:

1. Press and release the SELECT/RESET stem to display “OIL LIFE

XXX% HOLD RESET = NEW”.

2. Press and hold the SELECT/RESET stem for two seconds and release

to reset the oil life to 100%.

Note: To change oil life 100% miles value from 7,500 miles (12,000 km)

or 12 months to another value, proceed to Step 3.

3. Once “OIL LIFE SET TO XXX%” is displayed, release and press the

SELECT/RESET stem to change the Oil Life Start Value. Each release

and press will reduce the value by 10%.

UNITS

Displays the current units English or Metric.

Press the SELECT/RESET stem to change from English to Metric.

AUTOLAMP (SEC)

This feature keeps your headlights on for up to three minutes after the

ignition is switched off.

Press the SELECT/RESET stem to select the new autolamp delay values

of 0, 10, 20, 30, 60, 90, 120 or 180 seconds.

AUTOLOCK

This feature automatically locks all vehicle doors when the vehicle is

shifted into any gear, putting the vehicle in motion.

Press the SELECT/RESET stem to turn autolock on or off.

AUTOUNLOCK

This feature automatically unlocks all vehicle doors when the driver’s

door is opened within 10 minutes of the ignition being turned off.

Instrument Cluster

2010 F-150 (f12)

Owners Guide, 1st Printing

USA (fus)

1 2 ... 19 20 21 22 23 24 25 26 27 28 29 ... 418 419

Pas de commentaire

Ford 2010 F-150 v.1 Manuel d'utilisateur Page 24