Ford 2010 F-150 v.1 Manuel d'utilisateur télécharger pdf (Page 339)

100

101

Preparing your vehicle

When the battery is disconnected or a new battery is installed, the

automatic transmission must relearn its shift strategy. As a result, the

transmission may have firm and/or soft shifts. This operation is

considered normal and will not affect function or durability of the

transmission. Over time, the adaptive learning process will fully update

transmission operation.

1. Use only a 12–volt supply to start your vehicle.

2. Do not disconnect the battery of the disabled vehicle as this could

damage the vehicle’s electrical system.

3. Park the booster vehicle close to the hood of the disabled vehicle

making sure the two vehicles do not touch. Set the parking brake on

both vehicles and stay clear of the engine cooling fan and other moving

parts.

4. Check all battery terminals and remove any excessive corrosion before

you attach the battery cables. Ensure that vent caps are tight and level.

5. Turn the heater fan on in both vehicles to protect from any electrical

surges. Turn all other accessories off.

Connecting the jumper cables

1. Connect the positive (+) jumper cable to the positive (+) terminal of

the discharged battery.

Note: In the illustrations, lightning bolts are used to designate the

assisting (boosting) battery.

–

Roadside Emergencies

339

2010 F-150 (f12)

Owners Guide, 1st Printing

USA (fus)

1 2 ... 334 335 336 337 338 339 340 341 342 343 344 ... 418 419

Commentaires sur ces manuels

Pas de commentaire

Ford 2010 F-150 v.1 Manuel d'utilisateur Page 339

Commentaires sur ces manuels

Produits connexes et manuels pour Voitures Ford 2010 F-150 v.1