Ford 2010 F-150 v.1 Manuel d'utilisateur télécharger pdf (Page 303)

Note: Momentarily releasing the accelerator pedal while preforming a

shift will improve engagement/disengagement times.

Note: Do not perform this operation if the rear wheels are slipping.

Note: Some noise may be heard as the system shifts or engages; this is

normal.

Note: 4X4 High mode is not intended for use on dry pavement.

Shifting to/from 4L (4X4 Low)

1. Bring the vehicle to a speed of 3 mph (5 km/h) or less.

2. Place the transmission in N (Neutral).

3. Move the transfer case lever through N (Neutral) directly to the

desired position.

• If the transfer case will not engage into 4L (4X4 Low) do not force

the lever. Allow the vehicle to coast at a speed below 3 mph

(5 km/h), then repeat Steps 2 and 3.

Note: Some noise may be heard as the system shifts or engages; this is

normal.

Note: 4X4 Low mode is not intended for use on dry pavement.

Note: For proper operation in 4X4 Low, ensure the transfer case shift

lever is moved entirely rearward in to the 4L (4X4 Low) position and

that the 4x4 Low light is displayed in the message center.

Note: Ideal 4L (4X4 Low) shift conditions occur when the vehicle is

rolling at a speed below 3 mph (5 km/h) and the transmission is in N

(Neutral).

Using the N (Neutral) position

The transfer case N (Neutral) position overrides the transmission

and puts the vehicle in neutral regardless of transmission

gearshift lever position. The vehicle can move forward or

backward.

This position should only be used when towing the vehicle.

WARNING: Do not leave the vehicle unattended with the

transfer case in the N (Neutral) position. Always set the parking

brake fully and turn off the ignition when leaving the vehicle.

Driving

303

2010 F-150 (f12)

Owners Guide, 1st Printing

USA (fus)

1 2 ... 298 299 300 301 302 303 304 305 306 307 308 ... 418 419

Pas de commentaire

Ford 2010 F-150 v.1 Manuel d'utilisateur Page 303