Ford 2010 F-150 v.1 Manuel d'utilisateur télécharger pdf (Page 294)

100

101

P (Park)

This position locks the transmission

and prevents the rear wheels from

turning.

To put your vehicle in gear:

• Press the brake pedal

• Start the engine

• Move the gearshift lever into the

desired gear. If your vehicle is

equipped with a floor-shift

transmission, press the gearshift

lever release button (on the front

of the lever) while shifting into

the desired gear.

To put your vehicle in P (Park):

• Come to a complete stop

• Move the gearshift lever and securely latch it in P (Park)

WARNING: Always set the parking brake fully and make sure

the gearshift is latched in P (Park). Turn the ignition to the off

position and remove the key whenever you leave your vehicle.

R (Reverse)

With the gearshift lever in R (Reverse), the vehicle will move backward.

Always come to a complete stop before shifting into and out of R

(Reverse).

N (Neutral)

With the gearshift lever in N (Neutral), the vehicle can be started and is

free to roll. Hold the brake pedal down while in this position.

D (Overdrive) with Tow/Haul Off

The normal driving position for the best fuel economy. Transmission

operates in gears one through six.

D (Overdrive) with Tow/Haul On

The Tow/Haul feature improves transmission operation when towing a

trailer or a heavy load. All transmission gear ranges are available when

using Tow/Haul.

Tow/Haul can be activated by pressing the transmission control switch on

the end of the gearshift lever (column-shift transmission) or on the side

of the gearshift lever (floor-shift transmission).

Driving

294

2010 F-150 (f12)

Owners Guide, 1st Printing

USA (fus)

1 2 ... 289 290 291 292 293 294 295 296 297 298 299 ... 418 419

Commentaires sur ces manuels

Pas de commentaire

Ford 2010 F-150 v.1 Manuel d'utilisateur Page 294

Commentaires sur ces manuels

Produits connexes et manuels pour Voitures Ford 2010 F-150 v.1