Ford 2006 Fusion v.2 Manuel d'utilisateur télécharger pdf (Page 214)

• 2.3L I4 engine

• 3.0L DOHC V6 Duratec engine

•Do not overfill the engine with oil. Oil levels above this mark

may cause engine damage. If the engine is overfilled, some oil must be

removed from the engine by an authorized dealer.

7. Put the indicator back in and ensure it is fully seated.

On 2.3L I4 engine, be sure the

notch in the indicator flange is

aligned with the V on the engine

when it is reinserted.

Adding engine oil

1. Check the engine oil. For instructions, refer to Checking the engine

oil in this chapter.

2. If the engine oil level is not within the normal operating range, add

only certified engine oil of the recommended viscosity. Remove the

engine oil filler cap and use a funnel to pour the engine oil into the

opening.

3. Recheck the engine oil level. Make sure the oil level is not above the

normal operating range on the engine oil level indicator (dipstick).

4. Install the indicator and ensure it is fully seated.

2006 Fusion (fsn)

Owners Guide (post-2002-fmt)

USA (fus)

Maintenance and Specifications

214

1 2 ... 209 210 211 212 213 214 215 216 217 218 219 ... 263 264

Pas de commentaire

Ford 2006 Fusion v.2 Manuel d'utilisateur Page 214