Ford 2006 Freestyle v.1 Manuel d'utilisateur télécharger pdf (Page 125)

• Grasp the shoulder portion and

pull downward until the entire

belt is pulled out.

• Allow the belt to retract. As the belt retracts, you will hear a clicking

sound. This indicates the safety belt is now in the automatic locking

mode.

How to disengage the automatic locking mode

Ford Motor Company recommends that all passenger safety belt

assemblies and attaching hardware should be inspected by an

authorized dealer after any collision to verify that the ⬙automatic

locking retractor⬙ feature for child seats is still working properly. Safety

belt assemblies should be inspected by an authorized dealer and must

be replaced if either damage or improper operation is noted. Failure to

replace the belt and retractor assembly could increase the risk of

injury in a collision.

Unbuckle the combination lap/shoulder belt and allow it to retract

completely to disengage the automatic locking mode and activate the

vehicle sensitive (emergency) locking mode.

Safety belt height adjustment

Your vehicle has safety belt height

adjustments for the front outboard

seating positions.

Adjust the height of the shoulder

belt so the belt rests across the

middle of your shoulder.

To adjust the shoulder belt height,

squeeze the button and slide the

height adjuster up or down. Release

the button and pull down on the

height adjuster to make sure it is locked in place.

2006 Freestyle (219)

Owners Guide (post-2002-fmt)

USA (fus)

Seating and Safety Restraints

125

1 2 ... 120 121 122 123 124 125 126 127 128 129 130 ... 287 288

Pas de commentaire

Ford 2006 Freestyle v.1 Manuel d'utilisateur Page 125