Introduction 4Instrument Cluster 10Warning and control lights 10Gauges 14Entertainment Systems 17AM/FM stereo with CD 17AM/FM stereo with in-dash six
WARNING LIGHTS AND CHIMESWarning lights and gauges can alert you to a vehicle condition that maybecome serious enough to cause extensive repairs. A wa
7. Turn the ignition to the 1 (LOCK) position. The horn will chirp onceto confirm the procedure is complete.Keyless entry key pad procedure1. Turn the
Anti-theft indicatorThe anti-theft indicator is located in the instrument panel cluster.• When the ignition is in the 1(LOCK) position, the indicatorw
Programming spare keysYou can program your own coded keys to your vehicle.Tips:• A maximum of eight keys can be coded to your vehicle.• Only use Secur
9. Remove the newly programmed coded key from the ignition.If the key has been successfully programmed it will start the vehicle’sengine and the theft
• Press the driver or passengerinterior door lock control whilethe door is open, then close thedoor.•Press the 7 • 8 and 9 • 0 controlson the keyless
SEATINGNotes:Reclining the seatback can cause an occupant to slide under theseat’s safety belt, resulting in severe personal injuries in theevent of a
Push release button to lower headrestraint.Adjusting the front manual seat (if equipped)Never adjust the driver’s seat or seatback when the vehicle is
Before returning the seatback to its original position, make surethat cargo or any objects are not trapped behind the seatback.After returning the sea
Before returning the seatback to its original position, make surethat cargo or any objects are not trapped behind the seatback.After returning the sea
Press the front or rear portion to tiltthe seat.• DriverPress the control to move the seatforward, backward, up or down.• DriverPress the control to m
Check fuel cap (if equipped):Illuminates when the fuel cap maynot be properly installed. Continueddriving with this light on may causethe Check engine
The indicator light on the control will illuminate when activated. For lowheat, one light will be lit; for high heat, both lights will be lit.The heat
The head restraints can be movedup by pulling up on the headrestraint.Push release button to lower headrestraint.Adjusting second row bucket and bench
Adjusting second row seats (if equipped)Lift the control to adjust the seatforward or backward.Accessing the third row seatsFold and tumble the second
Lift the handle all the way up untilthe seat releases from the floor.Rotate the seat forward to allowaccess to the third row.To return the seatback to
Before returning the seatback to its original position, make surethat cargo or any objects are not trapped behind the seatback.After returning the sea
To return the seatback to theupright position• Lift the seatback toward the rearof the vehicle, and• Rotate the seatback until youhear a click, lockin
Stowing the third row bench or split bench seat (if equipped)1. Stow the head restraints bypushing the head restraint releasebuttons while sliding the
Do not use the seat anchors as cargo tie downs.Note: Do not use the third row seatback as a load floor when theseatback is folded.Unstowing the third
Before returning the seatback to its original position, make surethat cargo or any objects are not trapped behind the seatback.After returning the sea
• Restraints Control Module (RCM) with impact and safing sensors.• Restraint system warning light and back-up tone.• The electrical wiring for the air
Safety belt: Reminds you to fastenyour safety belt. A chime will alsosound to remind you to fasten yoursafety belt.Charging system: Illuminates whenth
Driver’s seat position sensorThe driver’s seat position sensor allows your Personal Safety System娂 totailor the deployment level of the driver dual-st
safety belt pretensioner activation depending upon safety belt usage.Refer to Safety belt section in this chapter.Front safety belt pretensionersThe s
Safety belt precautionsAlways drive and ride with your seatback upright and the lapbelt snug and low across the hips.To reduce the risk of injury, mak
Combination lap and shoulder belts1. Insert the belt tongue into theproper buckle (the buckle closest tothe direction the tongue is comingfrom) until
All safety restraints in the vehicle are combination lap and shoulderbelts. All of the passenger combination lap and shoulder belts have twotypes of l
• Grasp the shoulder portion andpull downward until the entirebelt is pulled out.• Allow the belt to retract. As the belt retracts, you will hear a cl
Position the safety belt height adjusters so that the belt restsacross the middle of your shoulder. Failure to adjust the safetybelt properly could re
Safety belt maintenanceInspect the safety belt systems periodically to make sure they workproperly and are not damaged. Inspect the safety belts to ma
If... Then...The driver’s and frontpassenger’s safety belts arebuckled before the ignitionswitch is turned to the ONposition or less than 1-2minutes h
The following are reasons most often given for not wearing safety belts(All statistics based on U.S. data):Reasons given... Consider...“Crashes are ra
Speed control: Illuminates whenthe speed control is engaged. Turnsoff when the speed control systemis disengaged.Low washer fluid (if equipped):Illumi
Reasons given... Consider...“I have an airbag” Airbags offer greater protection whenused with safety belts. Frontal airbagsare not designed to inflate
• The gearshift is in P (Park) (automatic transmission)• The ignition switch is in the OFF position• The driver and front passenger safety belts are u
AIRBAG SUPPLEMENTAL RESTRAINT SYSTEM (SRS)The instrument panel grab handle should never be used forstorage. The path of an inflating airbag must be ke
Important SRS precautionsThe SRS is designed to work withthe safety belt to help protect thedriver and right front passengerfrom certain upper body in
• Recline the seat slightly one or two degrees from the upright position.Do not put anything on or over the air bag module. Placingobjects on or over
Determining if the system is operationalThe supplemental restraint system uses a warning indicator light in theinstrument cluster or a back-up tone to
The airbags inflate and deflaterapidly upon activation. After airbagdeployment, it is normal to notice asmoke-like, powdery residue orsmell the burnt
• diagnostic module.• and the electrical wiring which connects the components.The diagnostic module monitors its own internal circuits and thesuppleme
that the front passenger frontal airbag is disabled. The indicator lamp islocated in the center stack of the instrument panel above the radio.Note: Th
OccupantPass Airbag OffIndicator LightPassengerAirbagEmpty seat Unlit DisabledSmall child in child safetyseat or boosterLit DisabledSmall child with s
GAUGESSpeedometer: Indicates thecurrent vehicle speed.Engine coolant temperaturegauge: Indicates engine coolanttemperature. At normal operatingtempera
ObjectsPass Airbag OffIndicator LightPassengerAirbagEmpty seat, Small or mediumobject with safety belt buckledLit DisabledIf you think that the status
If objects are lodged and/or cargo is interfering with the seat; please takethe following steps to remove the obstruction:• Pull the vehicle over.• Tu
Do not attempt to service, repair, or modify the airbag SRS, itsfuses or the seat cover on a seat containing an airbag. See yourauthorized dealer.All
The airbag SRS is designed to activate when the vehicle sustains lateraldeceleration sufficient to cause the sensors to close an electrical circuittha
Do not attempt to service, repair, or modify the Safety Canopy娂system, its fuses, the A, B, C or D pillar trim, or the headliner ona vehicle containin
• Rollover sensor in the restraints control module (RCM).The Safety Canopy娂 system, in combination with safety belts, can helpreduce the risk of sever
If the Safety Canopy娂 system has deployed, the SafetyCanopy娂 will not function again unless replaced. TheSafety Canopy娂 system (including the A, B, C,
require that children use approved booster seats until they are eightyears old. Check your local and state or provincial laws for specificrequirements
Booster seats position a child so that safety belts fit better. They lift thechild up so that the lap belt rests low across the hips and the kneesbend
• Those with a high back.If, with a backless booster seat,you cannot find a seating positionthat adequately supports yourchild’s head, a high back boo
Fuel gauge: Indicatesapproximately how much fuel is leftin the fuel tank (when the ignitionis in the ON position). The fuelgauge may vary slightly whe
Move a child to a different seating location if the shoulder beltdoes not stay positioned on the shoulder during use.Follow all instructions provided
• Place seat back in upright position.• Put the safety belt in the automatic locking mode. Refer to Automaticlocking mode (passenger side front and ou
1. Position the child safety seat in aseat with a combination lap andshoulder belt.2. Pull down on the shoulder beltand then grasp the shoulder beltan
4. Insert the belt tongue into theproper buckle (the buckle closest tothe direction the tongue is comingfrom) for that seating position untilyou hear
8. Allow the safety belt to retract toremove any slack in the belt.9. Before placing the child in theseat, forcibly move the seat forwardand back to m
60/40 second row seatsDelivery vanFront passenger seating position (delivery van only)1. Position the child safety seat onthe passenger seat cushion.2
2. Route the child safety seat tetherstrap over the back of the seat. Ifthe head restraint is adjustable,route the tether strap under thehead restrain
If the tether strap is clippedincorrectly (as shown) thechild safety seat may not beretained properly in the event of acollision.5. Rotate the tether
Rear seating positionsFollow Steps 1–7 as described above for the following available seats:• 2nd row bucket (40/40)• 2nd row bench (60/40)• 3rd row b
Attaching safety seats with LATCH (Lower Anchors and Tethers forChildren) attachments for child seat anchorsNew child safety seats have two rigid or w
• With Message CenterTo reset with the ODO/TRIP button:• Tap on the button to toggle the display between the trip and theodometer. Holding the ODO/TRI
Each time you use the safety seat, check that the seat is properlyattached to the lower anchors and tether anchor. Try to tilt the childseat from side
INFORMATION ABOUT UNIFORM TIRE QUALITY GRADINGNew vehicles are fitted with tiresthat have a rating on them calledTire Quality Grades. The Qualitygrade
The traction grade assigned to this tire is based onstraight-ahead braking traction tests, and does not includeacceleration, cornering, hydroplaning o
• Extra load: A class of P-metric or Metric tires designed to carry aheavier maximum load at 41 psi [43 psi (2.9 bar) for Metric tires].Increasing the
Use a tire gauge to check the tire inflation pressure, including the spare(if equipped), at least monthly and before long trips. You are stronglyurged
If you are checking tire pressure when the tire is hot, (i.e. driven morethan 1 mile [1.6 km]), never “bleed” or reduce air pressure. The tires arehot
TIRE CAREInspecting your tiresPeriodically inspect the tire treads for uneven or excessive wear andremove objects such as stones, nails or glass that
AgeTires degrade over time, even when they are not being used. It isrecommended that tires generally be replaced after 6 years of normalservice. Heat
It is recommended that the two front tires or two rear tires generally bereplaced as a pair.Safety practicesDriving habits have a great deal to do wit
Front wheel drive (FWD) vehicles and those with an independent rearsuspension (if equipped) may require alignment of all four wheels.The tires should
AUDIO SYSTEMSAM/FM stereo/ single CD sound system (if equipped)Accessory delay: Your vehicle is equipped with accessory delay. Withthis feature, the w
• Rear Wheel Drive (RWD)vehicles/Four Wheel Drive(4WD)/ All Wheel Drive (AWD)vehicles (front tires at top ofdiagram)Sometimes irregular tire wear can
Information on “P” type tiresP215/65R15 95H is an example of atire size, load index and speedrating. The definitions of theseitems are listed below. (
Note: You may not find this information on all tires because it is notrequired by federal law.Letter rating Speed rating - mph (km/h)M 81 mph (130 km/
12. Treadwear, Traction and Temperature Grades• Treadwear: The treadwear grade is a comparative rating based on thewear rate of the tire when tested u
Additional information contained on the tire sidewall for “LT” typetires“LT” type tires have some additionalinformation beyond those of “P”type tires;
Information on “T” type tires“T” type tires have some additionalinformation beyond those of “P”type tires; these differences aredescribed below:T145/8
The tires on your vehicle have all weather treads to provide traction inrain and snow. However, in some climates, you may need to use snowtires and ch
Vehicle Curb Weight – is the weight of your new vehicle when youpicked it up from your authorized dealer plus any aftermarketequipment.Payload – is th
Example only:Cargo Weight – includes all weight added to the Base Curb Weight,including cargo and optional equipment. When towing, trailer tongue load
GAWR (Gross Axle Weight Rating) – is the maximum allowableweight that can be carried by a single axle (front or rear). Thesenumbers are shown on the S
When the six strongest stations are filled, the station stored in preset 1will begin playing. If there are less than six strong stations, the systemwi
GVWR (Gross Vehicle WeightRating) – is the maximumallowable weight of the fully loadedvehicle (including all options,equipment, passengers and cargo).
Maximum Loaded Trailer Weight – is the highest possible weight of afully loaded trailer the vehicle can tow. It assumes a vehicle with onlymandatory o
The following gives you a few examples on how to calculate the availableamount of cargo and luggage load capacity:• Another example for your vehicle w
Do not exceed the GVWR or the GAWR specified on thecertification label.Towing trailers beyond the maximum recommended gross trailerweight exceeds the
Do not connect a trailer’s hydraulic brake system directly to yourvehicle’s brake system. Your vehicle may not have enoughbraking power and your chanc
• After you have traveled 50 miles (80 km), thoroughly check yourhitch, electrical connections and trailer wheel lug nuts.• To aid in engine/transmiss
STARTINGPositions of the ignition1. LOCK, locks the automatictransaxle gearshift lever and allowskey removal. This position also shutsthe engine and a
Do not park, idle, or drive your vehicle in dry grass or other dryground cover. The emission system heats up the enginecompartment and exhaust system,
• Make sure the gearshift lever is inP (Park).3. Turn the key to 3 (RUN) withoutturning the key to 4 (START).Some warning lights will briefly illumina
Guarding against exhaust fumesCarbon monoxide is present in exhaust fumes. Take precautions to avoidits dangerous effects.If you smell exhaust fumes i
9. Repeat: Press to repeat thecurrent CD track.10. Fast forward: Press tomanually advance in a CD track.11. Rewind: Press to manuallyreverse in a CD t
Four-wheel anti-lock brake system (ABS)Your vehicle is equipped with an Anti-lock Braking System (ABS). Thissystem helps you maintain steering control
Parking brakeApply the parking brake wheneverthe vehicle is parked. To set theparking brake, press the parkingbrake pedal down until the pedalstops.Th
detecting and controlling wheel spin. The system borrows many of theelectronic elements already present in the anti-lock braking system(ABS).Wheel-spe
• Some noise is normal during operation. If the noise is excessive, checkfor low power steering pump fluid level before seeking service by yourauthori
2. Remove the console panel byopening the armrest, grasping thepanel firmly, then pulling up. Thiswill allow access to the gearshiftassembly.3. Locate
Understanding the gearshift positions of the Continuously VariableTransaxle (CVT)The CVT is a fully automatic transaxle that electronically monitorsve
To put your vehicle in P (Park):• Come to a complete stop• Move the gearshift lever and securely latch it in P (Park)Always set the parking brake full
This system is not designed to prevent contact with small ormoving objects. The system is designed to provide a warning toassist the driver in detecti
indicator light on the control will illuminate when the system is turnedoff. If the indicator light illuminates when the RSS is not turned off, itmay
Basic operating principles• Drive slower in strong crosswinds which can affect the normal steeringcharacteristics of your vehicle.• Be extremely caref
Seating and Safety Restraints 105Seating 105Safety restraints 118Airbags 132Child restraints 146Tires, Wheels and Loading 161Tire Information 161Tire
19. CD slot: Insert a CD label sideup.Premium/Audiophile In-Dash Six CD/MP3 Sound System(if equipped)Accessory delay: Your vehicle is equipped with ac
If the parking brake is fully released, but the brake warning lampremains illuminated, the brakes may not be working properly.See your authorized deal
Do not use L (Low) gear when driving through sand.Under severe operating conditions, the A/C may cycle on and off toprotect overheating of the engine.
Driving on hilly or sloping terrainAlthough natural obstacles may make it necessary to travel diagonally upor down a hill or steep incline, you should
Driving on snow and iceNote: Excessive tire slippage can cause transaxle damage.AWD vehicles have advantages over 2WD vehicles in snow and ice butcan
DRIVING THROUGH WATERIf driving through deep or standingwater is unavoidable, proceed veryslowly especially when the depth isnot known. Never drive th
ROADSIDE ASSISTANCEGetting roadside assistanceTo fully assist you should you have a vehicle concern, Ford Motor Companyoffers a complimentary roadside
• emergency travel expense reimbursement• travel planning benefitsUsing roadside assistanceComplete the roadside assistance identification card and pl
FUEL PUMP SHUT-OFF SWITCHThis device stops the electric fuel pump from sending fuel to the enginewhen your vehicle has had a substantial jolt.After an
Standard fuse amperage rating and colorCOLORFuseratingMinifusesStandardfusesMaxifusesCartridgemaxifusesFuse linkcartridge5A Tan Tan — — —7.5A Brown Br
The fuses are coded as follows.Fuse/RelayLocationFuse AmpRatingPassenger Compartment FusePanel DescriptionF1 20A High beamsF2 15A Interior lamps (Cour
3. Menu: Press to toggle throughthe following modes:Autoset: Allows you to set the strongest local radio stations withoutlosing your original manually
Fuse/RelayLocationFuse AmpRatingPassenger Compartment FusePanel DescriptionF15 10A Delayed accessory (Driver windowmotor logic, Auxiliary climatecontr
Power distribution boxThe power distribution box is located in the engine compartment. Thepower distribution box contains high-current fuses that prot
Fuse/RelayLocationFuse AmpRatingPower Distribution BoxDescription3 50A* Front and rear wipers (fuses 45and 47)4 — Not used5 20A* Moonroof6 — Not used7
Fuse/RelayLocationFuse AmpRatingPower Distribution BoxDescription28 80A* SJB power, SJB (Circuit breaker,Fuses 6, 7, 9, 10, 11 and 15)29 30A* Driver w
Fuse/RelayLocationFuse AmpRatingPower Distribution BoxDescription51 Full ISO relay Starter motor solenoid52 Full ISO relay Front A/C blower motor, Coo
A dissimilar spare tire/wheel is defined as a spare tire and/or wheel thatis different in brand, size or appearance from the road tires and wheelsand
• Use snow chains on the end of the vehicle with the dissimilar sparetire/wheelThe usage of a full-size dissimilar spare tire/wheel can lead toimpairm
1. Remove the carpeted floor panellocated in the rear of the vehicle,remove the wing nut that securesthe spare tire by turning itcounterclockwise.2. L
To help prevent the vehicle from moving when you change a tire,be sure to place the transaxle in P (Park), set the parking brakeand block (in both dir
4. Put the jack in the jack notchnext to the tire you are changing.Turn the jack handle clockwise untilthe wheel is completely off theground.5. Remove
Find: Allows you to search RDS-equipped stations for the desired musiccategory. Use/ to find the desired program type, then useSEEK or SCAN to begin t
Stowing the tire and jack1. Fully collapse the jack, fold thelug wrench socket into the handleand place the jack and wrench intothe felt bag as shown.
If you are stowing the flat tire,remove the “L”-shaped bolt from thelarge wing nut used to secure thespare tire in the vehicle. With the3rd row seat i
JUMP STARTINGThe gases around the battery can explode if exposed to flames,sparks, or lit cigarettes. An explosion could result in injury orvehicle da
Connecting the jumper cables1. Connect the positive (+) jumper cable to the positive (+) terminal ofthe discharged battery.Note: In the illustrations,
3. Connect the negative (-) cable to the negative (-) terminal of theassisting battery.4. Make the final connection of the negative (-) cable to an ex
Jump starting1. Start the engine of the booster vehicle and run the engine atmoderately increased speed.2. Start the engine of the disabled vehicle.3.
3. Remove the jumper cable from the positive (+) terminal of the boostervehicle’s battery.4. Remove the jumper cable from the positive (+) terminal of
WRECKER TOWINGIf you need to have your vehicle towed, contact a professional towingservice or, if you are a member of a roadside assistance program, y
In case of a roadside emergency with a disabled vehicle (without accessto wheel dollies, flatbed transport vehicle or a car hauling trailer) yourvehic
GETTING THE SERVICES YOU NEEDAt homeYou must take your Ford vehicle to an authorized dealer for warrantyrepairs. While any authorized dealer handling
11. Rewind: Press to manuallyreverse in a CD track.12. Memory presets: To set astation: Select frequency bandAM/FM; tune to a station, press andhold a
In Canada:Customer Relationship CentreFord Motor Company of Canada, LimitedP.O. Box 2000Oakville, Ontario L6J 5E41-800-565-3673 (FORD)www.ford.caIf yo
In some states (in the U.S.) you must directly notify Ford in writingbefore pursuing remedies under your state’s warranty laws. Ford is alsoallowed a
THE BETTER BUSINESS BUREAU (BBB) AUTO LINE PROGRAM(U.S. ONLY)Your satisfaction is important to Ford Motor Company and to your dealer.Experience has sh
UTILIZING THE MEDIATION/ARBITRATION PROGRAM(CANADA ONLY)For vehicles delivered to authorized Canadian dealers. In those caseswhere you continue to fee
If you did not take advantage of the Ford Extended Service Plan at thetime of purchasing your vehicle, you may still be eligible. Since thisinformatio
ORDERING ADDITIONAL OWNER’S LITERATURETo order the publications in this portfolio, contact Helm, Incorporated at:HELM, INCORPORATEDP.O. Box 07150Detro
WASHING THE EXTERIORWash your vehicle regularly with cool or lukewarm water and a neutralpH shampoo, such as Motorcraft Detail Wash (ZC-3–A), which is
WAXINGApplying Motorcraft Paint Sealant (ZC-45) to your vehicle every sixmonths will assist in reducing minor scratches and paint damage.• Wash the ve
ENGINEEngines are more efficient when they are clean because grease and dirtbuildup keep the engine warmer than normal. When washing:• Take care when
WINDOWS AND WIPER BLADESThe windshield, rear and side windows and the wiper blades should becleaned regularly. If the wipers do not wipe properly, sub
GENERAL AUDIO INFORMATIONRadio frequencies:AM and FM frequencies are established by the Federal CommunicationsCommission (FCC) and the Canadian Radio
INTERIOR TRIM• Clean the interior trim areas with a damp cloth, then with a clean, drycloth; you may also use Motorcraft Dash & Vinyl Cleaner (ZC-
• Do not use household cleaning products, alcohol solutions, solvents orcleaners intended for rubber, vinyl and plastics, or oil/petroleum-basedleathe
Motorcraft Premium Liquid Wax (ZC-53-A)Motorcraft Premium Windshield Washer Concentrate (ZC-32–A)Motorcraft Professional Strength Carpet & Upholst
SERVICE RECOMMENDATIONSTo help you service your vehicle:• We highlight do-it-yourself items in the engine compartment for easylocation.• We provide sc
OPENING THE HOOD1. Inside the vehicle, pull the hoodrelease handle located under thebottom of the instrument panel nearthe steering column.2. Go to th
IDENTIFYING COMPONENTS IN THE ENGINE COMPARTMENT3.0L DOHC V6 DURATEC ENGINE1. Engine coolant reservoir2. Power steering fluid reservoir3. Brake fluid
WINDSHIELD WASHER FLUIDAdd fluid to fill the reservoir if thelevel is low. In very cold weather, donot fill the reservoir completely.Only use a washer
To prolong the life of the wiper blades, it is highly recommended toscrape off the ice on the windshield before turning on the wipers. Thelayer of ice
6. Wipe the indicator clean. Insert the indicator fully, then remove it again.• If the oil level is within thisrange, the oil level is acceptable.DO N
3. Recheck the engine oil level. Make sure the oil level is not above thenormal operating range on the engine oil level indicator (dipstick).4. Instal
Audio system warranty and serviceRefer to the Warranty Guide for audio system warranty information. Ifservice is necessary, see your dealer or qualifi
It is recommended you use the appropriate Motorcraft oil filter (oranother brand meeting Ford specifications) for your engine application.BATTERYYour
When lifting a plastic-cased battery, excessive pressure on theend walls could cause acid to flow through the vent caps,resulting in personal injury a
If the battery has been disconnected or a new battery has been installed,the clock and radio settings must be reset once the battery isreconnected.• A
When the engine is cold, check thelevel of the engine coolant in thereservoir.• The engine coolant should be at the “FULL COLD” level or within the“CO
Do not add engine coolant when the engine is hot. Steam andscalding liquids released from a hot cooling system can burn youbadly. Also, you can be bur
1. Before you begin, turn the engine off and let it cool.2. When the engine is cool, wrap a thick cloth around the coolantpressure relief cap on the c
8. Add coolant/water mixturethrough the thermostat housingopening until full at housingopening.9. Install the thermostat housingbleed plug. Install me
If you have to add more than 1.0 quart (1.0 liter) of engine coolant permonth, have your authorized dealer check the engine cooling system.Your coolin
• Decreased engine coolant concentrations below 40% willdecrease the corrosion protection characteristics of the enginecoolant and may cause engine da
Automotive fuels can cause serious injury or death if misused ormishandled.Gasoline may contain benzene, which is a cancer-causing agent.Observe the f
2. PLAY/PAUSE controlPress to playback or pause the DVD.3. DIM controlPress (+) to increase or (-) to decrease the brightness on the screen.4. ENTER c
When refueling always shut the engine off and never allowsparks or open flames near the filler neck. Never smoke whilerefueling. Fuel vapor is extreme
3. Pull to remove the cap from the fuel filler pipe.4. To install the cap, align the tabs on the cap with the notches on thefiller pipe.5. Turn the fi
deteriorate more rapidly. In Canada, premium grade fuel generallycontains more metallic additives than regular grade fuel. We recommendusing regular g
Cleaner airFord endorses the use of reformulated “cleaner-burning” gasolines toimprove air quality.Running out of fuelAvoid running out of fuel becaus
For consistent results when filling the fuel tank:• Turn the engine/ignition switch to the off position prior to refueling,an error in the reading wil
Habits• Smooth, moderate operation can yield up to 10% savings in fuel.• Steady speeds without stopping will usually give the best fueleconomy.• Idlin
• Adding certain accessories to your vehicle (for example bugdeflectors, rollbars/light bars, running boards, ski/luggage racks) mayreduce fuel econom
If other than Ford, Motorcraft or Ford-authorized parts are used formaintenance replacements or for service of components affectingemission control, s
3. The fuel cap may not have been securely tightened. See Fuel fillercap in this chapter.These temporary malfunctions can be corrected by filling the
1. Start the engine and let it rununtil it reaches normal operatingtemperature (the engine coolanttemperature gauge indicator will benear the center o
• Press the NEXT control to movethe cursor one position upward• Press the PREV control to movethe cursor one position downward• Press the REV control
other than the recommended fluid, may affect transaxle operationand result in damage to internal transaxle components.Refer to your scheduled maintena
2For spark plug replacement, see your authorized dealer. Refer toscheduled maintenance information for the appropriate intervals forchanging the spark
Fluid Ford PartNameApplication CapacityAutomatictransaxle fluidMotorcraftContinuouslyVariable ChainTypeTransmissionFluid3CVT automatictransaxle10.0 qu
LUBRICANT SPECIFICATIONSItemsFord Part Nameor equivalentFord PartNumberFordSpecificationBrake fluid Motorcraft HighPerformanceDOT 3 MotorVehicle Brake
ItemsFord Part Nameor equivalentFord PartNumberFordSpecificationEngine oil Motorcraft SAE5W-20 PremiumSynthetic BlendMotor Oil (US)Motorcraft SAE5W-20
VEHICLE DIMENSIONSVehicle dimensions Inches (mm)(1) Overall length 199.8 (5075)(2) Overall width 74.4 (1891)(3) Overall height 68.9 (1732)(4) Wheelbas
IDENTIFYING YOUR VEHICLESafety Compliance Certification LabelThe National Highway Traffic SafetyAdministration Regulations requirethat a Safety Compli
Vehicle identification number (VIN)The vehicle identification number isattached to a metal tag and islocated on the driver sideinstrument panel.Please
TRANSMISSION/TRANSAXLE CODE DESIGNATIONSYou can find atransmission/transaxle code on theSafety Compliance CertificationLabel. The following table tell
GENUINE FORD ACCESSORIES FOR YOUR VEHICLEA wide selection of Genuine Ford Accessories are available for yourvehicle through your local Ford or Ford of
Enter controlThe ENTER control allows you toselect highlighted items when inMENU mode.CD play modePress NEXT during CD play toadvance to the next trac
Interior styleCarpeted floor matsElectrochromic mirror w/compassElectrochromic mirror w/compass and homelinkElectrochromic mirror w/compass and temper
Security systems - vehicle perimeter protectionFor maximum vehicle performance, keep the following information inmind when adding accessories or equip
AAccessory delay ...68Air cleaner filter ...270Air conditioning ...42, 44, 46, 49Airbag supplemental r
washing ...236waxing ...237wheels ...237wiper bl
specifications ...273–274Exhaust fumes ...189FFluid capacities ...271Foglamps ...
KKeyless entry system ...97autolock ...99keypad ...97locking and u
RRadio ...17, 20Relays ...207Remote entry system ...92illuminate
spare tire ...214terminology ...162tire grades ...162treadwear ...
288
Remote control1. REV (REVERSE) controlPress to reverse the direction of the DVD movie.2. FWD (FORWARD) controlPress to advance the direction of the DV
Maintenance and Specifications 243Engine compartment 245Engine oil 247Battery 250Engine Coolant 252Fuel information 258Part numbers 270Refill capaciti
7. MENU/MODE controlIn DVD playback mode, press to access the disc menu.In stop mode, press to change media types (e.g. AM, FM, CD...)8. VOL (VOLUME)
Battery replacementBatteries are provided with the remote control unit. Since all batterieshave a limited shelf life, replace them when the remote con
Wireless headphonesYour system is equipped with 2 setsof wireless headphones. (Two AAAbatteries are needed to operate theheadphones.) Batteries are in
controlled by the thumbwheel. Neither the remote control nor the rearseat controls will affect the volume output of the wireless headphones.When not u
Playback and format• The DVD player of your Family Entertainment DVD System can onlybe used in the “playback” mode. (The DVD player does not offer are
the ignition is turned on again, playback will begin from the lastselected media source when the play control is pressed.• To disable the DVD player r
2. Connect the left and right audio lines to the WHITE (left) and RED(right) auxiliary input jacks respectively.3. Press the MODE control repeatedly u
Safety informationRead all the safety and operating instructions before operating thesystem and retain for future reference.• Do not attempt to servic
Federal Communication Commission (FCC) ComplianceChanges or modifications not approved by Ford or Lincoln Mercury couldvoid user’s authority to operat
Cleaning the liquid crystal display (LCD) flip-down screenClean the display screen by applying a small amount of water or anyammonia-based household g
CALIFORNIA Proposition 65 WarningWARNING: Engine exhaust, some of its constituents, andcertain vehicle components contain or emit chemicals known toth
MANUAL HEATING AND AIR CONDITIONING SYSTEM(IF EQUIPPED)1. Temperature selection:Controls the temperature of theairflow in the vehicle.2. Air flow sele
6. Fan speed adjustment: Controls the volume of air circulated in thevehicle.Operating tips• To reduce fog build up on the windshield during humid wea
DUAL ZONE AUTOMATIC TEMPERATURE CONTROL(IF EQUIPPED)1.Defrost: Distributes outside air through the windshield defrosterand demister vents. Can be used
8. : Distributes air through the instrument panel and floor vents.9.: Distributes air through the instrument panel vents.10. Manual override controls:
Dual Zone Automatic Temperature Control with heated seats(if equipped)1.Defrost: Distributes outside air through the windshield defrosterand demister
7. A/C: Press to activate/deactivate air conditioning. Use withrecirculated air to improve cooling performance and efficiency. Engagesautomatically in
Dual Zone Automatic Temperature Control with rear passengercompartment climate control (if equipped)1.Defrost: Distributes outside air through the win
6. Recirculated air: Press to activate/deactivate air recirculationin the cabin. Recirculated air may reduce the amount of time to cooldown the interi
Operating tips• To reduce fog build up on the windshield during humid weather, placethe air flow selector in theposition.• To reduce humidity build up
Dual Zone Automatic Temperature Control with heated seats andrear passenger compartment climate control (if equipped)1.Defrost: Distributes outside ai
SAFETY AND ENVIRONMENT PROTECTIONWarning symbols in this guideHow can you reduce the risk of personal injury to yourself or others? Inthis guide, answ
7. Recirculated air: Press to activate/deactivate air recirculationin the cabin. Recirculated air may reduce the amount of time to cooldown the interi
17. Driver temperature control: Press to increase/decrease thetemperature on the driver side of the cabin. Sets the passenger sidetemperature also whe
HEADLAMP CONTROLTurns the lamps off.Turns on the parking lamps,instrument panel lamps, licenseplate lamps and tail lamps.Turns the headlamps on.Autola
5. Wait the desired amount of time for the exit delay you want (up tothree minutes), then turn the headlamp switch to. The headlampswill turn off.Fogl
Daytime running lamps (DRL) (if equipped)Turns the headlamps on with a reduced output.To activate:• the ignition must be in the ON position,• the head
• (1) 8 feet (2.4 meters)• (2) Center height of lamp toground• (3) 25 feet (7.6 meters)• (4) Horizontal reference line2. Measure the height of thehead
TURN SIGNAL CONTROL• Push down to activate the leftturn signal.• Push up to activate the right turnsignal.INTERIOR LAMPSDome lamps and map lampsThe ma
Using the right bulbsReplacement bulbs are specified in the chart below. Headlamp bulbsmust be marked with an authorized “D.O.T.” for North America an
3. Locate the outboardmostelectrical connector and remove itby releasing the locking tab andpulling it off.4. Remove the bulb socket byturning it coun
3. Locate the front sidemarker lampelectrical connector and remove itby pulling it off.4. Remove the bulb socket byturning it counterclockwise andpull
SPECIAL NOTICESNew Vehicle Limited WarrantyFor a detailed description of what is covered and what is not covered byyour vehicle’s New Vehicle Limited
Replacing high-mount brake lamp bulbs1. Make sure the ignition control isin the OFF position.2. Remove the two screws.3. Unclip the bulb holder from t
MULTI-FUNCTION LEVERWindshield wiper: For intermittentoperation, move control up oneposition.Adjust the rotary control to thedesired speed setting.Mis
Rear window wiper/washer controlsFor rear wiper operation, rotate therear window wiper and washercontrol to the desired position.Select:2 — Three to f
ILLUMINATED VISOR MIRROR (IF EQUIPPED)Lift the mirror cover to turn on thevisor mirror lamp. The visor willslide back and forth on the rod forincrease
Storage compartmentPress the latch to open the storagecompartment. The door will openslightly and can be moved to fullopen.The storage compartment may
Second row center console features (if equipped)The second row center consoleincorporates the following features:• Utility compartment• Cupholders• Fl
Do not hold the lighter in with your hand while it is heating, this willdamage the lighter element and socket. The lighter will be released fromits he
To operate ONE TOUCH UP:• Pull the switch completely up tothe second detent and releasequickly. The driver’s window willclose fully. Momentarily press
Accessory delayWith accessory delay, the radio, Family Entertainment DVD System (ifequipped), power windows, and moonroof (if equipped) operate for up
Fold-away mirrorsPull the side mirrors in carefullywhen driving through a narrowspace, like an automatic car wash.Heated outside mirrors(if equipped)B
• where the driver was positioning the steering wheel.To access this information, special equipment must be directly connectedto the recording modules
Memory feature (if equipped)The accelerator and brake pedal positions are saved when doing amemory set function and can be recalled along with the veh
Note:• Vehicle speed may vary momentarily when driving up and down asteep hill.• If the vehicle speed increases above the set speed on a downhill, you
Reducing speed while using speed controlThere are two ways to reduce a setspeed:• Press and hold the SET - controluntil you get to the desiredspeed, t
STEERING WHEEL CONTROLS (IF EQUIPPED)Radio control features• Press MEDIA to select AM, FM1,FM2, or CD (if equipped).In Radio mode:• Press SEEK to acce
To open the moon roof:The moon roof is equipped with anautomatic, one-touch, expressopening and closing feature. To stopmotion at any time during theo
Do not use the HomeLink威 Wireless Control System with any garagedoor opener that lacks safety stop and reverse features as required byU.S. federal saf
3. Simultaneously press and holdboth the HomeLink威 and hand-heldtransmitter button. Do not releasethe buttons until Step 4 hasbeen completed.Some entr
Gate Operator & Canadian ProgrammingDuring programming, yourhand-held transmitter mayautomatically stop transmitting —not allowing enough time for
Erasing HomeLink姞 buttonsTo erase the three programmedbuttons (individual buttons cannotbe erased):• Press and hold the two outerHomeLink威 buttons unt
Selectable featuresResetPress this control to select and reset functions shown in the INFO menuand SETUP menu.Info menuThis control displays the follo
These are some of the symbols you may see on your vehicle.Vehicle Symbol GlossarySafety AlertSee Owner’s GuideFasten Safety Belt Airbag - FrontAirbag
Average fuel economy (AFE)Select this function from the INFOmenu to display your average fueleconomy in miles/gallon or liters/100km.If you calculate
2. Press and release RESET to pause the timer.3. Press and hold RESET for 2 seconds in order to reset the timer.Compass displaySelect this function fr
4. Determine your magnetic zone byreferring to the zone map.5. Press and hold the RESET untilthe message center display changesto show the current zon
4. Drive the vehicle in circles up tothree times until the message⬙CALIBRATION COMPLETED⬙appears and one of the 8 validheadings (N, NE, E, SE, S, SW,
Units (English/Metric)1. Select this function from theSETUP menu for the current unitsto be displayed.2. Press the RESET control tochange from English
Warning messages that have been reset are divided into three categories:• They will not disappear until a condition is changed.• They will reappear on
LOW FUEL LEVEL. Displayed as an early reminder of a low fuelcondition.CHECK CHARGING SYSTEM. Displayed when the electrical system isnot maintaining pr
To reset the oil life to 100% with system warnings CHANGE OILSOON/OIL CHANGE REQUIRED displayed:1. Select this function from theSETUP control for curr
LIFTGATEUnlock the liftgate (but do notrelease it) with the power door locksystem and remote entrytransmitter.To open the liftgate, pull the liftgateh
Cargo van storage compartment (if equipped)The cargo van storage compartment consists of two storagecompartments located in the floor of the cargo are
Vehicle Symbol GlossaryPower WindowsFront/RearPower Window LockoutChild Safety DoorLock/UnlockInterior LuggageCompartment ReleaseSymbolPanic Alarm Eng
KEYSOne key operates all the locks and starts the vehicle. Always carry aspare key with you in case of an emergency.Your keys are programmed to your v
1. Place the key in the ignition and turn the ignition to the 3 (RUN)position.2. Press the power door unlock control on the door panel three times.3.
REMOTE ENTRY SYSTEMThis device complies with part 15 of the FCC rules and with RS-210 ofIndustry Canada. Operation is subject to the following two con
The remote entry system activates the illuminated entry feature; thisfeature turns on the lamps for 25 seconds or until the ignition is turnedto the 3
Activating the memory seat featureTo activate this feature:1. Position the seat, mirrors and adjustable pedals to the positiondesired.2. Press the SET
3. Remove the old battery. Note: Please refer to local regulations whendisposing of transmitter batteries.4. Insert the new battery. Refer to the diag
4. The doors will lock, then unlock, to confirm that the programmingmode has been activated.5. Within 20 seconds press any button on the remote entry
Illuminated exit• When all vehicle doors and the liftgate are closed, and the key isremoved from the ignition, the interior dome lamps (and the exteri
• Pressing 3 • 4 recalls Driver 2 settings.• Pressing other keypad buttons or not pressing a keypad button as asixth digit does not set a driver and w
To lock all doors and liftgate, press the 7 • 8 and the 9 • 0atthesame time. Note: The driver’s door must be closed. You do not need toenter the keypa
Commentaires sur ces manuels