Ford 2006 Expedition v.1 Manuel d'utilisateur télécharger pdf (Page 327)

Use the following guidelines to avoid static build-up when filling an

ungrounded fuel container:

• Place approved fuel container on the ground.

• DO NOT fill a fuel container while it is in the vehicle (including the

cargo area).

• Keep the fuel pump nozzle in contact with the fuel container while

filling.

• DO NOT use a device that would hold the fuel pump handle in the fill

position.

Fuel Filler Cap

Your fuel tank filler cap has an indexed design with a 1/4 turn on/off

feature.

When fueling your vehicle:

1. Turn the engine off.

2. Carefully turn the filler cap counterclockwise 1/4 turn until it stops.

3. Pull to remove the cap from the fuel filler pipe.

4. To install the cap, align the tabs on the cap with the notches on the

filler pipe.

5. Turn the filler cap clockwise 1/4 of a turn until at least a few clicks are

heard.

If ”Check fuel cap” displays in the message center or the ”Service Engine

Soon” indicator (vehicle without message center) comes on and stays on

after you start the engine, the fuel filler cap may not be properly

installed. Turn off the engine, remove the fuel filler cap, align the cap

properly and reinstall it.

If you must replace the fuel filler cap, replace it with a fuel filler

cap that is designed for your vehicle. The customer warranty may

be void for any damage to the fuel tank or fuel system if the

correct genuine Ford or Motorcraft fuel filler cap is not used.

The fuel system may be under pressure. If the fuel filler cap is

venting vapor or if you hear a hissing sound, wait until it stops

before completely removing the fuel filler cap. Otherwise, fuel may

spray out and injure you or others.

2006 Expedition (exd)

Owners Guide (post-2002-fmt)

USA (fus)

Maintenance and Specifications

327

1 2 ... 322 323 324 325 326 327 328 329 330 331 332 ... 359 360

Pas de commentaire

Ford 2006 Expedition v.1 Manuel d'utilisateur Page 327