Ford 2006 Expedition v.1 Manuel d'utilisateur télécharger pdf (Page 103)

100

101

Replacing foglamp bulbs

Handle a halogen headlamp bulb carefully and keep out of

children’s reach. Grasp the bulb only by its plastic base and do

not touch the glass. The oil from your hand could cause the bulb to

break the next time the headlamps are operated.

1. Make sure the headlamp switch is

in the OFF position and the engine

is not running.

2. Remove the bulb socket from the

foglamp by turning

counterclockwise.

3. Disconnect the electrical connector from the foglamp bulb.

4. Connect the new foglamp bulb to the electrical connector.

5. Install the bulb socket in the foglamp turning clockwise.

Replacing license plate lamp bulb

The license plate bulbs are located in the license plate housing assembly

on the liftgate. To change the license plate bulbs:

1. Make sure the headlamp switch is

in the OFF position.

2. Remove the license lamp screw

from the assembly.

3. Pull the lamp down and twist the

bulb socket counterclockwise.

Remove the bulb socket from the

lamp.

4. Pull out the old bulb and push in

the new bulb.

5. Install the bulb socket in the lamp assembly by turning it clockwise.

6. Install the lamp assembly and secure it with the retaining screw.

2006 Expedition (exd)

Owners Guide (post-2002-fmt)

USA (fus)

Lights

103

1 2 ... 98 99 100 101 102 103 104 105 106 107 108 ... 359 360

Commentaires sur ces manuels

Pas de commentaire

Ford 2006 Expedition v.1 Manuel d'utilisateur Page 103

Commentaires sur ces manuels

Produits connexes et manuels pour Voitures Ford 2006 Expedition v.1